diff mbox

PCI, pciehp: turn on link again after power off the slot

Message ID 1343683797-19017-1-git-send-email-yinghai@kernel.org
State Rejected
Headers show

Commit Message

Yinghai Lu July 30, 2012, 9:29 p.m. UTC
During debugging hotplug surpise support, found slot status reg does not report
present status anymore after removing the card. That present bit
does not get cleared even that card is removed. So no interrupt is generated
later after reinsert the card.

That problem is caused by commit:
| commit 2debd9289997fc5d1c0043b41201a8b40d5e11d0
|    PCI: pciehp: Disable/enable link during slot power off/on

Try turn on link after power off.
With the fix present bit will report correctly, also still avoid the aer
during the power off.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Cc: stable@vger.kernel.org

 drivers/pci/hotplug/pciehp_hpc.c |    2 ++
 1 file changed, 2 insertions(+)

To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox


Index: linux-2.6/drivers/pci/hotplug/pciehp_hpc.c
--- linux-2.6.orig/drivers/pci/hotplug/pciehp_hpc.c
+++ linux-2.6/drivers/pci/hotplug/pciehp_hpc.c
@@ -631,6 +631,8 @@  int pciehp_power_off_slot(struct slot *
 	slot_cmd = POWER_OFF;
 	cmd_mask = PCI_EXP_SLTCTL_PCC;
 	retval = pcie_write_cmd(ctrl, slot_cmd, cmd_mask);
+	/* need to enable link again for present bit report */
+	pciehp_link_enable(ctrl);
 	if (retval) {
 		ctrl_err(ctrl, "Write command failed!\n");
 		return retval;