Show patches with: State = Action Required       |    Archived = No       |   20183 patches
« 1 2 ... 83 84 85 … 201 202 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[V14,5/7] PCI: loongson: Improve the MRRS quirk for LS7A PCI: Loongson pci improvements and quirks - - - - --- 2022-06-17 陈华才 New
[V14,4/7] PCI: loongson: Don't access non-existant devices PCI: Loongson pci improvements and quirks - - - - --- 2022-06-17 陈华才 New
[V14,3/7] PCI: loongson: Add ACPI init support PCI: Loongson pci improvements and quirks - - - - --- 2022-06-17 陈华才 New
[V14,2/7] PCI: loongson: Use generic 8/16/32-bit config ops on LS2K/LS7A PCI: Loongson pci improvements and quirks 1 - - - --- 2022-06-17 陈华才 New
[V14,1/7] PCI/ACPI: Guard ARM64-specific mcfg_quirks PCI: Loongson pci improvements and quirks - - - - --- 2022-06-17 陈华才 New
[v5,2/2] PCI: xilinx-cpm: Add support for Versal CPM5 Root Port Add support for Xilinx Versal CPM5 Root Port - - - - --- 2022-06-16 Bharat Kumar Gogada New
[v5,1/2] dt-bindings: PCI: xilinx-cpm: Add Versal CPM5 Root Port Add support for Xilinx Versal CPM5 Root Port - - - - --- 2022-06-16 Bharat Kumar Gogada New
[v12,13/13] PCI: imx6: Disable clocks in reverse order of enable PCI: imx6: refine codes and add the error propagation 1 - - - --- 2022-06-15 Bjorn Helgaas New
[v12,12/13] PCI: imx6: Do not hide phy driver callbacks and refine the error handling PCI: imx6: refine codes and add the error propagation - - - - --- 2022-06-15 Bjorn Helgaas New
[v12,11/13] PCI: imx6: Reduce resume time by only starting link if it was up before suspend PCI: imx6: refine codes and add the error propagation - - - - --- 2022-06-15 Bjorn Helgaas New
[v12,10/13] PCI: imx6: Mark the link down as non-fatal error PCI: imx6: refine codes and add the error propagation - - - - --- 2022-06-15 Bjorn Helgaas New
[v12,09/13] PCI: imx6: Turn off regulator when system is in suspend mode PCI: imx6: refine codes and add the error propagation - - - - --- 2022-06-15 Bjorn Helgaas New
[v12,08/13] PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks PCI: imx6: refine codes and add the error propagation - - 1 - --- 2022-06-15 Bjorn Helgaas New
[v12,07/13] PCI: imx6: Propagate .host_init() errors to caller PCI: imx6: refine codes and add the error propagation - - 1 - --- 2022-06-15 Bjorn Helgaas New
[v12,06/13] PCI: imx6: Collect clock enables in imx6_pcie_clk_enable() PCI: imx6: refine codes and add the error propagation - - 1 - --- 2022-06-15 Bjorn Helgaas New
[v12,05/13] PCI: imx6: Factor out ref clock disable to match enable PCI: imx6: refine codes and add the error propagation 1 - - - --- 2022-06-15 Bjorn Helgaas New
[v12,04/13] PCI: imx6: Move imx6_pcie_clk_disable() earlier PCI: imx6: refine codes and add the error propagation - - 1 - --- 2022-06-15 Bjorn Helgaas New
[v12,03/13] PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier PCI: imx6: refine codes and add the error propagation 1 - - - --- 2022-06-15 Bjorn Helgaas New
[v12,02/13] PCI: imx6: Move PHY management functions together PCI: imx6: refine codes and add the error propagation 1 - - - --- 2022-06-15 Bjorn Helgaas New
[v12,01/13] PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier PCI: imx6: refine codes and add the error propagation 1 - - - --- 2022-06-15 Bjorn Helgaas New
[v7,21/21] nvme-pci: allow mmaping the CMB in userspace Userspace P2PDMA with O_DIRECT NVMe devices - - - - --- 2022-06-15 Logan Gunthorpe New
[v7,20/21] PCI/P2PDMA: Introduce pci_mmap_p2pmem() Userspace P2PDMA with O_DIRECT NVMe devices 1 - - - --- 2022-06-15 Logan Gunthorpe New
[v7,19/21] block: set FOLL_PCI_P2PDMA in bio_map_user_iov() Userspace P2PDMA with O_DIRECT NVMe devices - - - - --- 2022-06-15 Logan Gunthorpe New
[v7,18/21] block: set FOLL_PCI_P2PDMA in __bio_iov_iter_get_pages() Userspace P2PDMA with O_DIRECT NVMe devices - - - - --- 2022-06-15 Logan Gunthorpe New
[v7,17/21] lib/scatterlist: add check when merging zone device pages Userspace P2PDMA with O_DIRECT NVMe devices - - - - --- 2022-06-15 Logan Gunthorpe New
[v7,16/21] block: add check when merging zone device pages Userspace P2PDMA with O_DIRECT NVMe devices - - - - --- 2022-06-15 Logan Gunthorpe New
[v7,15/21] iov_iter: introduce iov_iter_get_pages_[alloc_]flags() Userspace P2PDMA with O_DIRECT NVMe devices - - - - --- 2022-06-15 Logan Gunthorpe New
[v7,14/21] mm: introduce FOLL_PCI_P2PDMA to gate getting PCI P2PDMA pages Userspace P2PDMA with O_DIRECT NVMe devices - - 1 - --- 2022-06-15 Logan Gunthorpe New
[v7,13/21] PCI/P2PDMA: Remove pci_p2pdma_[un]map_sg() Userspace P2PDMA with O_DIRECT NVMe devices 1 - 3 - --- 2022-06-15 Logan Gunthorpe New
[v7,12/21] RDMA/rw: drop pci_p2pdma_[un]map_sg() Userspace P2PDMA with O_DIRECT NVMe devices - - 2 - --- 2022-06-15 Logan Gunthorpe New
[v7,11/21] RDMA/core: introduce ib_dma_pci_p2p_dma_supported() Userspace P2PDMA with O_DIRECT NVMe devices - - 3 - --- 2022-06-15 Logan Gunthorpe New
[v7,10/21] nvme-pci: convert to using dma_map_sgtable() Userspace P2PDMA with O_DIRECT NVMe devices - - 3 - --- 2022-06-15 Logan Gunthorpe New
[v7,09/21] nvme-pci: check DMA ops when indicating support for PCI P2PDMA Userspace P2PDMA with O_DIRECT NVMe devices - - 2 - --- 2022-06-15 Logan Gunthorpe New
[v7,08/21] iommu/dma: support PCI P2PDMA pages in dma-iommu map_sg Userspace P2PDMA with O_DIRECT NVMe devices - - 1 - --- 2022-06-15 Logan Gunthorpe New
[v7,07/21] dma-mapping: add flags to dma_map_ops to indicate PCI P2PDMA support Userspace P2PDMA with O_DIRECT NVMe devices - - 2 - --- 2022-06-15 Logan Gunthorpe New
[v7,06/21] dma-direct: support PCI P2PDMA pages in dma-direct map_sg Userspace P2PDMA with O_DIRECT NVMe devices - - 1 - --- 2022-06-15 Logan Gunthorpe New
[v7,05/21] dma-mapping: allow EREMOTEIO return code for P2PDMA transfers Userspace P2PDMA with O_DIRECT NVMe devices - - 2 - --- 2022-06-15 Logan Gunthorpe New
[v7,04/21] PCI/P2PDMA: Introduce helpers for dma_map_sg implementations Userspace P2PDMA with O_DIRECT NVMe devices 1 - 1 - --- 2022-06-15 Logan Gunthorpe New
[v7,03/21] PCI/P2PDMA: Expose pci_p2pdma_map_type() Userspace P2PDMA with O_DIRECT NVMe devices 1 - 3 - --- 2022-06-15 Logan Gunthorpe New
[v7,02/21] PCI/P2PDMA: Attempt to set map_type if it has not been set Userspace P2PDMA with O_DIRECT NVMe devices 1 - 2 - --- 2022-06-15 Logan Gunthorpe New
[v7,01/21] lib/scatterlist: add flag for indicating P2PDMA segments in an SGL Userspace P2PDMA with O_DIRECT NVMe devices - - 2 - --- 2022-06-15 Logan Gunthorpe New
[v2] PCI: qcom: Allow L1 and its sub states [v2] PCI: qcom: Allow L1 and its sub states - - 1 - --- 2022-06-15 Krishna Chaitanya Chundru New
[RESEND,v10,2/3] PCI: mediatek: Allow building for ARCH_AIROHA [RESEND,v10,1/3] dt-bindings: PCI: Add support for Airoha EN7532 1 - - - --- 2022-06-15 Felix Fietkau New
[RESEND,v10,1/3] dt-bindings: PCI: Add support for Airoha EN7532 [RESEND,v10,1/3] dt-bindings: PCI: Add support for Airoha EN7532 1 - - - --- 2022-06-15 Felix Fietkau New
[PATCHv2,2/2] uio:powerpc:mpc85xx: l2-cache-sram uio driver implementation uio:powerpc:mpc85xx: l2-cache-sram uio driver - - - - --- 2022-06-15 Wang Wenhu New
[PATCHv2,1/2] mm: eliminate ifdef of HAVE_IOREMAP_PROT in .c files uio:powerpc:mpc85xx: l2-cache-sram uio driver - - - - --- 2022-06-15 Wang Wenhu New
[v11,8/8] PCI: imx6: Do not hide phy driver callbacks and refine the error handling PCI: imx6: refine codes and add the error propagation - - - - --- 2022-06-14 Hongxing Zhu New
[v11,7/8] PCI: imx6: Reduce resume time by only starting link if it was up before suspend PCI: imx6: refine codes and add the error propagation - - - - --- 2022-06-14 Hongxing Zhu New
[v11,6/8] PCI: imx6: Mark the link down as none fatal error PCI: imx6: refine codes and add the error propagation - - - - --- 2022-06-14 Hongxing Zhu New
[v11,5/8] PCI: imx6: Turn off regulator when the system is in suspend mode PCI: imx6: refine codes and add the error propagation - - - - --- 2022-06-14 Hongxing Zhu New
[v11,4/8] PCI: imx6: Disable iMX6QDL PCIe REF clock when disable PCIe clocks PCI: imx6: refine codes and add the error propagation - - 1 - --- 2022-06-14 Hongxing Zhu New
[v11,3/8] PCI: imx6: Move imx6_pcie_clk_disable() earlier PCI: imx6: refine codes and add the error propagation - - 1 - --- 2022-06-14 Hongxing Zhu New
[v11,2/8] PCI: imx6: Add the error propagation from host_init PCI: imx6: refine codes and add the error propagation - - 1 - --- 2022-06-14 Hongxing Zhu New
[v11,1/8] PCI: imx6: Encapsulate the clock enable into one standalone function PCI: imx6: refine codes and add the error propagation - - 1 - --- 2022-06-14 Hongxing Zhu New
[v3,5/5] MAINTAINERS: Add Axis ARTPEC-8 PCIe PHY maintainers [v3,1/5] dt-bindings: pci: Add ARTPEC-8 PCIe controller - - - - --- 2022-06-14 Wangseok Lee New
[v3,4/5] phy: Add ARTPEC-8 PCIe PHY driver [v3,1/5] dt-bindings: pci: Add ARTPEC-8 PCIe controller - - - - --- 2022-06-14 Wangseok Lee New
[v3,3/5] PCI: axis: Add ARTPEC-8 PCIe controller driver [v3,1/5] dt-bindings: pci: Add ARTPEC-8 PCIe controller - - - - --- 2022-06-14 Wangseok Lee New
[v3,2/5] dt-bindings: phy: Add ARTPEC-8 PCIe phy [v3,1/5] dt-bindings: pci: Add ARTPEC-8 PCIe controller - - - - --- 2022-06-14 Wangseok Lee New
[v3,1/5] dt-bindings: pci: Add ARTPEC-8 PCIe controller [v3,1/5] dt-bindings: pci: Add ARTPEC-8 PCIe controller - - - - --- 2022-06-14 Wangseok Lee New
[v1,1/1] x86/PCI: Disable e820 usage for the resource allocation [v1,1/1] x86/PCI: Disable e820 usage for the resource allocation - 1 - - --- 2022-06-13 Andy Shevchenko New
[v3,3/6] x86/amd_nb: Add Family 19h model 60h-6Fh IDs [v3,1/6] x86/amd_nb: Add AMD Family 17h A0-AF IDs - - 1 - --- 2022-06-13 Mario Limonciello New
[v3,2/6] x86/amd_nb: Add Family 19h model 70h-7Fh IDs [v3,1/6] x86/amd_nb: Add AMD Family 17h A0-AF IDs 1 - 1 - --- 2022-06-13 Mario Limonciello New
[v3,1/6] x86/amd_nb: Add AMD Family 17h A0-AF IDs [v3,1/6] x86/amd_nb: Add AMD Family 17h A0-AF IDs 1 - 1 - --- 2022-06-13 Mario Limonciello New
[7/7] arm64: dts: renesas: r8a779f0: spider: Enable PCIe Host ch0 treewide: PCI: renesas: Add R-Car Gen4 PCIe support - - - - --- 2022-06-13 Yoshihiro Shimoda New
[6/7] arm64: dts: renesas: r8a779f0: Add PCIe Host and Endpoint nodes treewide: PCI: renesas: Add R-Car Gen4 PCIe support - - - - --- 2022-06-13 Yoshihiro Shimoda New
[5/7] MAINTAINERS: Update PCI DRIVER FOR RENESAS R-CAR for R-Car Gen4 treewide: PCI: renesas: Add R-Car Gen4 PCIe support - - - - --- 2022-06-13 Yoshihiro Shimoda New
[4/7] PCI: renesas: Add R-Car Gen4 PCIe Endpoint support treewide: PCI: renesas: Add R-Car Gen4 PCIe support - - - - --- 2022-06-13 Yoshihiro Shimoda New
[3/7] PCI: renesas: Add R-Car Gen4 PCIe Host support treewide: PCI: renesas: Add R-Car Gen4 PCIe support - - - - --- 2022-06-13 Yoshihiro Shimoda New
[2/7] dt-bindings: PCI: renesas: Add R-Car Gen4 PCIe Endpoint treewide: PCI: renesas: Add R-Car Gen4 PCIe support - - - - --- 2022-06-13 Yoshihiro Shimoda New
[1/7] dt-bindings: PCI: renesas: Add R-Car Gen4 PCIe Host treewide: PCI: renesas: Add R-Car Gen4 PCIe support - - - - --- 2022-06-13 Yoshihiro Shimoda New
[5.10,2/2] commit 1b5d73fb8624 ("igc: Enable PCIe PTM") [5.10,1/2] commit 1d71eb53e451 ("Revert "PCI: Make pci_enable_ptm() private"") - - - 1 --- 2022-06-13 Meng Tang New
[5.10,1/2] commit 1d71eb53e451 ("Revert "PCI: Make pci_enable_ptm() private"") [5.10,1/2] commit 1d71eb53e451 ("Revert "PCI: Make pci_enable_ptm() private"") 1 - - - --- 2022-06-13 Meng Tang New
[v10,7/7] PCI: imx6: Do not hide phy driver callbacks and refine the error handling PCI: imx6: refine codes and add the error propagation - - - - --- 2022-06-13 Hongxing Zhu New
[v10,6/7] PCI: imx6: Mark the link down as none fatal error PCI: imx6: refine codes and add the error propagation - - - - --- 2022-06-13 Hongxing Zhu New
[v10,5/7] PCI: imx6: Turn off regulator when the system is in suspend mode PCI: imx6: refine codes and add the error propagation - - - - --- 2022-06-13 Hongxing Zhu New
[v10,4/7] PCI: imx6: Disable iMX6QDL PCIe REF clock when disable PCIe clocks PCI: imx6: refine codes and add the error propagation - - 1 - --- 2022-06-13 Hongxing Zhu New
[v10,3/7] PCI: imx6: Move imx6_pcie_clk_disable() earlier PCI: imx6: refine codes and add the error propagation - - 1 - --- 2022-06-13 Hongxing Zhu New
[v10,2/7] PCI: imx6: Add the error propagation from host_init PCI: imx6: refine codes and add the error propagation - - 1 - --- 2022-06-13 Hongxing Zhu New
[v10,1/7] PCI: imx6: Encapsulate the clock enable into one standalone function PCI: imx6: refine codes and add the error propagation - - 1 - --- 2022-06-13 Hongxing Zhu New
dt-bindings: PCI: qcom: fix description typo dt-bindings: PCI: qcom: fix description typo - - - - --- 2022-06-13 Baruch Siach New
x86/PCI: Revert: "Clip only host bridge windows for E820 regions" x86/PCI: Revert: "Clip only host bridge windows for E820 regions" - 1 - 1 --- 2022-06-12 Hans de Goede New
[v7,3/3] PCI: qcom: Add IPQ60xx support PCI: IPQ6018 platform support 1 - 1 - --- 2022-06-12 Baruch Siach New
[v7,2/3] PCI: qcom: Define slot capabilities using PCI_EXP_SLTCAP_* PCI: IPQ6018 platform support 1 - 1 - --- 2022-06-12 Baruch Siach New
[v7,1/3] PCI: dwc: tegra: move GEN3_RELATED DBI register to common header PCI: IPQ6018 platform support - - 1 - --- 2022-06-12 Baruch Siach New
[V11,8/8] cxl/port: Parse out DSMAS data from CDAT table CXL: Read CDAT and DSMAS data - - - - --- 2022-06-10 Ira Weiny New
[V11,7/8] cxl/port: Retry reading CDAT on failure CXL: Read CDAT and DSMAS data - - 2 - --- 2022-06-10 Ira Weiny New
[V11,6/8] cxl/port: Introduce cxl_cdat_valid() CXL: Read CDAT and DSMAS data - - - - --- 2022-06-10 Ira Weiny New
[V11,5/8] cxl/port: Read CDAT table CXL: Read CDAT and DSMAS data - - - - --- 2022-06-10 Ira Weiny New
[V11,4/8] cxl/pci: Create PCI DOE mailbox's for memory devices CXL: Read CDAT and DSMAS data - - 1 - --- 2022-06-10 Ira Weiny New
[V11,3/8] PCI: Create PCI library functions in support of DOE mailboxes. CXL: Read CDAT and DSMAS data - - - - --- 2022-06-10 Ira Weiny New
[V11,2/8] PCI: Replace magic constant for PCI Sig Vendor ID CXL: Read CDAT and DSMAS data 1 - 2 - --- 2022-06-10 Ira Weiny New
[V11,1/8] PCI: Add vendor ID for the PCI SIG CXL: Read CDAT and DSMAS data 1 - 2 - --- 2022-06-10 Ira Weiny New
PCI: Align MPS to upstream bridge for SAFE and PERFORMANCE mode PCI: Align MPS to upstream bridge for SAFE and PERFORMANCE mode - - - - --- 2022-06-10 Z.Q. Hou New
[v2] mm: eliminate ifdef of HAVE_IOREMAP_PROT in .c files [v2] mm: eliminate ifdef of HAVE_IOREMAP_PROT in .c files 1 - - - --- 2022-06-10 Wang Wenhu New
[stable-4.9] PCI: qcom: Fix unbalanced PHY init on probe errors [stable-4.9] PCI: qcom: Fix unbalanced PHY init on probe errors 1 1 1 - --- 2022-06-10 Johan Hovold New
[stable-4.14] PCI: qcom: Fix unbalanced PHY init on probe errors [stable-4.14] PCI: qcom: Fix unbalanced PHY init on probe errors 1 1 1 - --- 2022-06-10 Johan Hovold New
[stable-5.17] PCI: qcom: Fix pipe clock imbalance [stable-5.17] PCI: qcom: Fix pipe clock imbalance - 1 1 - --- 2022-06-10 Johan Hovold New
mm: eliminate ifdef of HAVE_IOREMAP_PROT in .c files mm: eliminate ifdef of HAVE_IOREMAP_PROT in .c files - - - - --- 2022-06-10 Wang Wenhu New
[v3,24/24] PCI: dwc: Add DW eDMA engine support dmaengine: dw-edma: Add RP/EP local DMA controllers support - - 1 - --- 2022-06-10 Serge Semin New
[v3,23/24] dmaengine: dw-edma: Skip cleanup procedure if no private data found dmaengine: dw-edma: Add RP/EP local DMA controllers support - - 1 1 --- 2022-06-10 Serge Semin New
« 1 2 ... 83 84 85 … 201 202 »