| Message ID | 20240415182052.374494-1-mr.nuke.me@gmail.com |
|---|---|
| Headers | show |
| Series | ipq9574: Enable PCI-Express support | expand |
On 4/15/2024 11:50 PM, Alexandru Gagniuc wrote: > There are four PCIe ports on IPQ9574, pcie0 thru pcie3. This series > addresses pcie2, which is a gen3x2 port. The board I have only uses > pcie2, and that's the only one enabled in this series. > > I believe this makes sense as a monolithic series, as the individual > pieces are not that useful by themselves. > > In v2, I've had some issues regarding the dt schema checks. For > transparency, I used the following test invocations to test v3: > > make dt_binding_check DT_SCHEMA_FILES=qcom,pcie.yaml:qcom,ipq8074-qmp-pcie-phy.yaml > make dtbs_check DT_SCHEMA_FILES=qcom,pcie.yaml:qcom,ipq8074-qmp-pcie-phy.yaml > > Alexandru, Thanks for your contributions to the Qualcomm IPQ chipsets. I would like to inform you that we have also submitted the patches to enable the PCIe support on IPQ9574[1][2] and waiting for the ICC support[3] to land to enable the NOC clocks. [1] https://lore.kernel.org/linux-arm-msm/20230519090219.15925-1-quic_devipriy@quicinc.com/ [2] https://lore.kernel.org/linux-arm-msm/20230519085723.15601-1-quic_devipriy@quicinc.com/ [3] https://lore.kernel.org/linux-arm-msm/20240418092305.2337429-1-quic_varada@quicinc.com/ Please take a look at these patches as well. Thanks, Kathiravan T. > Changes since v2: > - reworked resets in qcom,pcie.yaml to resolve dt schema errors > - constrained "reg" in qcom,pcie.yaml > - reworked min/max intems in qcom,ipq8074-qmp-pcie-phy.yaml > - dropped msi-parent for pcie node, as it is handled by "msi" IRQ > > Changes since v1: > - updated new tables in phy-qcom-qmp-pcie.c to use lowercase hex numbers > - reorganized qcom,ipq8074-qmp-pcie-phy.yaml to use a single list of clocks > - reorganized qcom,pcie.yaml to include clocks+resets per compatible > - Renamed "pcie2_qmp_phy" label to "pcie2_phy" > - moved "ranges" property of pcie@20000000 higher up > > Alexandru Gagniuc (7): > dt-bindings: clock: Add PCIe pipe related clocks for IPQ9574 > clk: qcom: gcc-ipq9574: Add PCIe pipe clocks > dt-bindings: PCI: qcom: Add IPQ9574 PCIe controller > PCI: qcom: Add support for IPQ9574 > dt-bindings: phy: qcom,ipq8074-qmp-pcie: add ipq9574 gen3x2 PHY > phy: qcom-qmp-pcie: add support for ipq9574 gen3x2 PHY > arm64: dts: qcom: ipq9574: add PCIe2 nodes > > .../devicetree/bindings/pci/qcom,pcie.yaml | 35 +++++ > .../phy/qcom,ipq8074-qmp-pcie-phy.yaml | 36 ++++- > arch/arm64/boot/dts/qcom/ipq9574.dtsi | 93 +++++++++++- > drivers/clk/qcom/gcc-ipq9574.c | 76 ++++++++++ > drivers/pci/controller/dwc/pcie-qcom.c | 13 +- > drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 136 +++++++++++++++++- > .../phy/qualcomm/phy-qcom-qmp-pcs-pcie-v5.h | 14 ++ > include/dt-bindings/clock/qcom,ipq9574-gcc.h | 4 + > 8 files changed, 400 insertions(+), 7 deletions(-) >
Hi Kathiravan, On 4/19/24 09:28, Kathiravan Thirumoorthy wrote: > > > On 4/15/2024 11:50 PM, Alexandru Gagniuc wrote: >> There are four PCIe ports on IPQ9574, pcie0 thru pcie3. This series >> addresses pcie2, which is a gen3x2 port. The board I have only uses >> pcie2, and that's the only one enabled in this series. >> >> I believe this makes sense as a monolithic series, as the individual >> pieces are not that useful by themselves. >> >> In v2, I've had some issues regarding the dt schema checks. For >> transparency, I used the following test invocations to test v3: >> >> make dt_binding_check >> DT_SCHEMA_FILES=qcom,pcie.yaml:qcom,ipq8074-qmp-pcie-phy.yaml >> make dtbs_check >> DT_SCHEMA_FILES=qcom,pcie.yaml:qcom,ipq8074-qmp-pcie-phy.yaml >> >> > > Alexandru, > > Thanks for your contributions to the Qualcomm IPQ chipsets. > > I would like to inform you that we have also submitted the patches to > enable the PCIe support on IPQ9574[1][2] and waiting for the ICC > support[3] to land to enable the NOC clocks. > > [1] > https://lore.kernel.org/linux-arm-msm/20230519090219.15925-1-quic_devipriy@quicinc.com/ > [2] > https://lore.kernel.org/linux-arm-msm/20230519085723.15601-1-quic_devipriy@quicinc.com/ > [3] > https://lore.kernel.org/linux-arm-msm/20240418092305.2337429-1-quic_varada@quicinc.com/ > > Please take a look at these patches as well. I think I've seen [1] before -- I thought the series was abandoned. Since we have the dt-schema and applicability on mainline resolved here, do you want to use this series as the base for any new PCIe work? Alex > Thanks, > Kathiravan T. > > >> Changes since v2: >> - reworked resets in qcom,pcie.yaml to resolve dt schema errors >> - constrained "reg" in qcom,pcie.yaml >> - reworked min/max intems in qcom,ipq8074-qmp-pcie-phy.yaml >> - dropped msi-parent for pcie node, as it is handled by "msi" IRQ >> >> Changes since v1: >> - updated new tables in phy-qcom-qmp-pcie.c to use lowercase hex >> numbers >> - reorganized qcom,ipq8074-qmp-pcie-phy.yaml to use a single list of >> clocks >> - reorganized qcom,pcie.yaml to include clocks+resets per compatible >> - Renamed "pcie2_qmp_phy" label to "pcie2_phy" >> - moved "ranges" property of pcie@20000000 higher up >> >> Alexandru Gagniuc (7): >> dt-bindings: clock: Add PCIe pipe related clocks for IPQ9574 >> clk: qcom: gcc-ipq9574: Add PCIe pipe clocks >> dt-bindings: PCI: qcom: Add IPQ9574 PCIe controller >> PCI: qcom: Add support for IPQ9574 >> dt-bindings: phy: qcom,ipq8074-qmp-pcie: add ipq9574 gen3x2 PHY >> phy: qcom-qmp-pcie: add support for ipq9574 gen3x2 PHY >> arm64: dts: qcom: ipq9574: add PCIe2 nodes >> >> .../devicetree/bindings/pci/qcom,pcie.yaml | 35 +++++ >> .../phy/qcom,ipq8074-qmp-pcie-phy.yaml | 36 ++++- >> arch/arm64/boot/dts/qcom/ipq9574.dtsi | 93 +++++++++++- >> drivers/clk/qcom/gcc-ipq9574.c | 76 ++++++++++ >> drivers/pci/controller/dwc/pcie-qcom.c | 13 +- >> drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 136 +++++++++++++++++- >> .../phy/qualcomm/phy-qcom-qmp-pcs-pcie-v5.h | 14 ++ >> include/dt-bindings/clock/qcom,ipq9574-gcc.h | 4 + >> 8 files changed, 400 insertions(+), 7 deletions(-) >>
On 4/20/2024 1:17 AM, mr.nuke.me@gmail.com wrote: > Hi Kathiravan, > > On 4/19/24 09:28, Kathiravan Thirumoorthy wrote: >> >> >> On 4/15/2024 11:50 PM, Alexandru Gagniuc wrote: >>> There are four PCIe ports on IPQ9574, pcie0 thru pcie3. This series >>> addresses pcie2, which is a gen3x2 port. The board I have only uses >>> pcie2, and that's the only one enabled in this series. >>> >>> I believe this makes sense as a monolithic series, as the individual >>> pieces are not that useful by themselves. >>> >>> In v2, I've had some issues regarding the dt schema checks. For >>> transparency, I used the following test invocations to test v3: >>> >>> make dt_binding_check >>> DT_SCHEMA_FILES=qcom,pcie.yaml:qcom,ipq8074-qmp-pcie-phy.yaml >>> make dtbs_check >>> DT_SCHEMA_FILES=qcom,pcie.yaml:qcom,ipq8074-qmp-pcie-phy.yaml >>> >>> >> >> Alexandru, >> >> Thanks for your contributions to the Qualcomm IPQ chipsets. >> >> I would like to inform you that we have also submitted the patches to >> enable the PCIe support on IPQ9574[1][2] and waiting for the ICC >> support[3] to land to enable the NOC clocks. >> >> [1] >> https://lore.kernel.org/linux-arm-msm/20230519090219.15925-1-quic_devipriy@quicinc.com/ >> [2] >> https://lore.kernel.org/linux-arm-msm/20230519085723.15601-1-quic_devipriy@quicinc.com/ >> [3] >> https://lore.kernel.org/linux-arm-msm/20240418092305.2337429-1-quic_varada@quicinc.com/ >> >> Please take a look at these patches as well. > > I think I've seen [1] before -- I thought the series was abandoned. > Since we have the dt-schema and applicability on mainline resolved here, > do you want to use this series as the base for any new PCIe work? Sure Alex. I believe some of the code review comments are already addressed in the series which I pointed out. If you could have picked those and re-posted the next version, it could have been better. > > Alex > >> Thanks, >> Kathiravan T. >> >> >>> Changes since v2: >>> - reworked resets in qcom,pcie.yaml to resolve dt schema errors >>> - constrained "reg" in qcom,pcie.yaml >>> - reworked min/max intems in qcom,ipq8074-qmp-pcie-phy.yaml >>> - dropped msi-parent for pcie node, as it is handled by "msi" IRQ >>> >>> Changes since v1: >>> - updated new tables in phy-qcom-qmp-pcie.c to use lowercase hex >>> numbers >>> - reorganized qcom,ipq8074-qmp-pcie-phy.yaml to use a single list >>> of clocks >>> - reorganized qcom,pcie.yaml to include clocks+resets per compatible >>> - Renamed "pcie2_qmp_phy" label to "pcie2_phy" >>> - moved "ranges" property of pcie@20000000 higher up >>> >>> Alexandru Gagniuc (7): >>> dt-bindings: clock: Add PCIe pipe related clocks for IPQ9574 >>> clk: qcom: gcc-ipq9574: Add PCIe pipe clocks >>> dt-bindings: PCI: qcom: Add IPQ9574 PCIe controller >>> PCI: qcom: Add support for IPQ9574 >>> dt-bindings: phy: qcom,ipq8074-qmp-pcie: add ipq9574 gen3x2 PHY >>> phy: qcom-qmp-pcie: add support for ipq9574 gen3x2 PHY >>> arm64: dts: qcom: ipq9574: add PCIe2 nodes >>> >>> .../devicetree/bindings/pci/qcom,pcie.yaml | 35 +++++ >>> .../phy/qcom,ipq8074-qmp-pcie-phy.yaml | 36 ++++- >>> arch/arm64/boot/dts/qcom/ipq9574.dtsi | 93 +++++++++++- >>> drivers/clk/qcom/gcc-ipq9574.c | 76 ++++++++++ >>> drivers/pci/controller/dwc/pcie-qcom.c | 13 +- >>> drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 136 +++++++++++++++++- >>> .../phy/qualcomm/phy-qcom-qmp-pcs-pcie-v5.h | 14 ++ >>> include/dt-bindings/clock/qcom,ipq9574-gcc.h | 4 + >>> 8 files changed, 400 insertions(+), 7 deletions(-) >>>
There are four PCIe ports on IPQ9574, pcie0 thru pcie3. This series addresses pcie2, which is a gen3x2 port. The board I have only uses pcie2, and that's the only one enabled in this series. I believe this makes sense as a monolithic series, as the individual pieces are not that useful by themselves. In v2, I've had some issues regarding the dt schema checks. For transparency, I used the following test invocations to test v3: make dt_binding_check DT_SCHEMA_FILES=qcom,pcie.yaml:qcom,ipq8074-qmp-pcie-phy.yaml make dtbs_check DT_SCHEMA_FILES=qcom,pcie.yaml:qcom,ipq8074-qmp-pcie-phy.yaml Changes since v2: - reworked resets in qcom,pcie.yaml to resolve dt schema errors - constrained "reg" in qcom,pcie.yaml - reworked min/max intems in qcom,ipq8074-qmp-pcie-phy.yaml - dropped msi-parent for pcie node, as it is handled by "msi" IRQ Changes since v1: - updated new tables in phy-qcom-qmp-pcie.c to use lowercase hex numbers - reorganized qcom,ipq8074-qmp-pcie-phy.yaml to use a single list of clocks - reorganized qcom,pcie.yaml to include clocks+resets per compatible - Renamed "pcie2_qmp_phy" label to "pcie2_phy" - moved "ranges" property of pcie@20000000 higher up Alexandru Gagniuc (7): dt-bindings: clock: Add PCIe pipe related clocks for IPQ9574 clk: qcom: gcc-ipq9574: Add PCIe pipe clocks dt-bindings: PCI: qcom: Add IPQ9574 PCIe controller PCI: qcom: Add support for IPQ9574 dt-bindings: phy: qcom,ipq8074-qmp-pcie: add ipq9574 gen3x2 PHY phy: qcom-qmp-pcie: add support for ipq9574 gen3x2 PHY arm64: dts: qcom: ipq9574: add PCIe2 nodes .../devicetree/bindings/pci/qcom,pcie.yaml | 35 +++++ .../phy/qcom,ipq8074-qmp-pcie-phy.yaml | 36 ++++- arch/arm64/boot/dts/qcom/ipq9574.dtsi | 93 +++++++++++- drivers/clk/qcom/gcc-ipq9574.c | 76 ++++++++++ drivers/pci/controller/dwc/pcie-qcom.c | 13 +- drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 136 +++++++++++++++++- .../phy/qualcomm/phy-qcom-qmp-pcs-pcie-v5.h | 14 ++ include/dt-bindings/clock/qcom,ipq9574-gcc.h | 4 + 8 files changed, 400 insertions(+), 7 deletions(-)