@@ -400,6 +400,100 @@ static int spinand_lock_block(struct spinand_device *spinand, u8 lock)
return spinand_write_reg_op(spinand, REG_BLOCK_LOCK, lock);
}
+/**
+ * spinand_read_param_page_op - Read parameter page operation
+ * @base: the nand device
+ * @page: page number where parameter page tables can be found
+ * @buf: buffer used to store the parameter page
+ * @len: length of the buffer
+ *
+ * Read parameter page
+ *
+ * Returns 0 on success, a negative error code otherwise.
+ */
+static int spinand_parameter_page_read(struct nand_device *base,
+ u8 page, void *buf, unsigned int len)
+{
+ struct spinand_device *spinand = nand_to_spinand(base);
+ struct spi_mem_op pread_op = SPINAND_PAGE_READ_OP(page);
+ struct spi_mem_op pread_cache_op =
+ SPINAND_PAGE_READ_FROM_CACHE_OP(false,
+ 0,
+ 1,
+ buf,
+ len);
+ u8 feature;
+ u8 status;
+ int ret;
+
+ if (len && !buf)
+ return -EINVAL;
+
+ ret = spinand_read_reg_op(spinand, REG_CFG,
+ &feature);
+ if (ret)
+ return ret;
+
+ /* CFG_OTP_ENABLE is used to enable parameter page access */
+ feature |= CFG_OTP_ENABLE;
+
+ spinand_write_reg_op(spinand, REG_CFG, feature);
+
+ ret = spi_mem_exec_op(spinand->spimem, &pread_op);
+ if (ret)
+ return ret;
+
+ ret = spinand_wait(spinand, &status);
+ if (ret < 0)
+ return ret;
+
+ ret = spi_mem_exec_op(spinand->spimem, &pread_cache_op);
+ if (ret)
+ return ret;
+
+ ret = spinand_read_reg_op(spinand, REG_CFG,
+ &feature);
+ if (ret)
+ return ret;
+
+ feature &= ~CFG_OTP_ENABLE;
+
+ spinand_write_reg_op(spinand, REG_CFG, feature);
+
+ return 0;
+}
+
+static int check_version(struct nand_device *base,
+ struct nand_onfi_params *p, int *onfi_version)
+{
+ /*
+ * SPI NANDs do not necessarily support ONFI standard,
+ * but, parameter page looks the same as an ONFI table.
+ */
+ if (!le16_to_cpu(p->revision))
+ *onfi_version = 0;
+
+ return 0;
+}
+
+static int spinand_intf_data(struct nand_device *base,
+ struct nand_onfi_params *p)
+{
+ return 0;
+}
+
+static int spinand_param_page_detect(struct spinand_device *spinand)
+{
+ struct nand_device *base = spinand_to_nand(spinand);
+
+ base->helper.page = 0x01;
+ base->helper.check_revision = check_version;
+ base->helper.parameter_page_read = spinand_parameter_page_read;
+ base->helper.init_intf_data = spinand_intf_data;
+
+ return nand_onfi_detect(base);
+}
+
static int spinand_check_ecc_status(struct spinand_device *spinand, u8 status)
{
struct nand_device *nand = spinand_to_nand(spinand);
@@ -910,6 +1004,15 @@ static int spinand_detect(struct spinand_device *spinand)
return ret;
}
+ if (!spinand->base.memorg.pagesize) {
+ ret = spinand_param_page_detect(spinand);
+ if (ret <= 0) {
+ dev_err(dev, "no parameter page for %*phN\n",
+ SPINAND_MAX_ID_LEN, spinand->id.data);
+ return -ENODEV;
+ }
+ }
+
if (nand->memorg.ntargets > 1 && !spinand->select_target) {
dev_err(dev,
"SPI NANDs with more than one die must implement ->select_target()\n");
Instantiate onfi_helper object for SPI NAND. Enable SPI NAND core to detect SPI NANDs with parameter page. Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com> --- drivers/mtd/nand/spi/core.c | 103 ++++++++++++++++++++++++++++++++++++ 1 file changed, 103 insertions(+)