diff mbox series

[v2,4/5] arm64: dts: qcom: sdx75: Add QPIC NAND support

Message ID 20250415072756.20046-5-quic_kaushalk@quicinc.com
State New
Headers show
Series Enable QPIC BAM and QPIC NAND support for SDX75 | expand

Commit Message

Kaushal Kumar April 15, 2025, 7:27 a.m. UTC 
Add devicetree node to enable support for QPIC NAND controller on Qualcomm
SDX75 platform.

Signed-off-by: Kaushal Kumar <quic_kaushalk@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sdx75.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

Comments

Konrad Dybcio April 15, 2025, 9:53 a.m. UTC | #1 
On 4/15/25 9:27 AM, Kaushal Kumar wrote:
> Add devicetree node to enable support for QPIC NAND controller on Qualcomm
> SDX75 platform.
> 
> Signed-off-by: Kaushal Kumar <quic_kaushalk@quicinc.com>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sdx75.dtsi b/arch/arm64/boot/dts/qcom/sdx75.dtsi
index e3a0ee661c4a..61ec8e7a0e21 100644
--- a/arch/arm64/boot/dts/qcom/sdx75.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdx75.dtsi
@@ -894,6 +894,25 @@ 
 			status = "disabled";
 		};
 
+		qpic_nand: nand-controller@1cc8000 {
+			compatible = "qcom,sdx75-nand", "qcom,sdx55-nand";
+			reg = <0x0 0x01cc8000 0x0 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&rpmhcc RPMH_QPIC_CLK>,
+				 <&sleep_clk>;
+			clock-names = "core",
+				      "aon";
+			dmas = <&qpic_bam 0>,
+			       <&qpic_bam 1>,
+			       <&qpic_bam 2>;
+			dma-names = "tx",
+				    "rx",
+				    "cmd";
+			iommus = <&apps_smmu 0x100 0x3>;
+			status = "disabled";
+		};
+
 		tcsr_mutex: hwlock@1f40000 {
 			compatible = "qcom,tcsr-mutex";
 			reg = <0x0 0x01f40000 0x0 0x40000>;