diff mbox series

[2/8] spi: Introduce spi-cs-setup-ns property

Message ID 20221117105249.115649-3-tudor.ambarus@microchip.com
State Accepted
Delegated to: Ambarus Tudor
Headers show
Series spi: Introduce spi-cs-setup-ns dt property | expand

Commit Message

Tudor Ambarus Nov. 17, 2022, 10:52 a.m. UTC 
SPI NOR flashes have specific cs-setup time requirements without which
they can't work at frequencies close to their maximum supported frequency,
as they miss the first bits of the instruction command. Unrecognized
commands are ignored, thus the flash will be unresponsive. Introduce the
spi-cs-setup-ns property to allow spi devices to specify their cs setup
time.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
 drivers/spi/spi.c | 6 ++++++
 1 file changed, 6 insertions(+)
diff mbox series

Patch

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 4ddd250481f5..b93a6085d9a0 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -2224,6 +2224,7 @@  static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi,
 			   struct device_node *nc)
 {
 	u32 value;
+	u16 cs_setup;
 	int rc;
 
 	/* Mode (clock phase/polarity/etc.) */
@@ -2309,6 +2310,11 @@  static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi,
 	if (!of_property_read_u32(nc, "spi-max-frequency", &value))
 		spi->max_speed_hz = value;
 
+	if (!of_property_read_u16(nc, "spi-cs-setup-ns", &cs_setup)) {
+		spi->cs_setup.value = cs_setup;
+		spi->cs_setup.unit = SPI_DELAY_UNIT_NSECS;
+	}
+
 	return 0;
 }