From patchwork Fri Mar 13 15:46:45 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Pratyush Yadav X-Patchwork-Id: 1254495 X-Patchwork-Delegate: tudor.ambarus@gmail.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=none (no SPF record) smtp.mailfrom=lists.infradead.org (client-ip=2607:7c80:54:e::133; helo=bombadil.infradead.org; envelope-from=linux-mtd-bounces+incoming=patchwork.ozlabs.org@lists.infradead.org; receiver=) Authentication-Results: ozlabs.org; dmarc=fail (p=quarantine dis=none) header.from=ti.com Authentication-Results: ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=lists.infradead.org header.i=@lists.infradead.org header.a=rsa-sha256 header.s=bombadil.20170209 header.b=s9diMAyD; dkim=fail reason="signature verification failed" (1024-bit key; unprotected) header.d=ti.com header.i=@ti.com header.a=rsa-sha256 header.s=ti-com-17Q1 header.b=nB6Bk/bv; dkim-atps=neutral Received: from bombadil.infradead.org (bombadil.infradead.org [IPv6:2607:7c80:54:e::133]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256) (No client certificate requested) by ozlabs.org (Postfix) with ESMTPS id 48f9RD1sscz9sPF for ; Sat, 14 Mar 2020 03:01:12 +1100 (AEDT) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:Cc:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=5JYk+cQkUNW7gjvAjnXIal2ZcrJXztHvBDOEwyAVOAU=; b=s9diMAyDRNSe1Z yaUiu/W+xPOc0a39k3hB711Uu3TuTe4Ouj5NtTqFEVSonkLEj72KDxTyLGs5PY8HGpw5eFRJt0TDV V33J8T7JAK6DLBP7/E/rf26tAEwmNLOLnoZ2E68VCZEGAQEsEYNG3UOlsjafc4RDPqH6sUPMjrBMt 7arrtefxiQA4YH5vRVVArSKd2SBLNBG7ybsGcmxHEAVm/yVSwWFndbkwswY+mUQjkDu5dZd3jjubi LCjOulGrZyrUsZ/vUMgpUxzd3e1ki+/oDX3SZxrskYwLkzYdVby+x6oFoE3bay8uBmq+DrROybYo8 NvomKTjnbYSozmvzJWPw==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1jCmk4-0007VI-OG; Fri, 13 Mar 2020 16:00:56 +0000 Received: from fllv0016.ext.ti.com ([198.47.19.142]) by bombadil.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1jCmXI-0000TT-Ol; Fri, 13 Mar 2020 15:47:47 +0000 Received: from lelv0266.itg.ti.com ([10.180.67.225]) by fllv0016.ext.ti.com (8.15.2/8.15.2) with ESMTP id 02DFleuu061889; Fri, 13 Mar 2020 10:47:40 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1584114460; bh=PBtgqtv7pcaHGKUb/NLZhIfHzgeOSmG9PfYewmWYmAw=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=nB6Bk/bvxmTt7rWzHREbXvMHXI9s5NKfFz79xjxmEmhW5pjN1OgGTABBS+pJWjcU3 t89QVJXS42amY/GK71UyWcTp6GUguQIEuWy95b7TJVuJr+UbSUrhj4aF1kncF81Z83 1NgvwRlxGvLvIyvv1FiwC3idPVIxNz9ZR04xWjxs= Received: from DFLE105.ent.ti.com (dfle105.ent.ti.com [10.64.6.26]) by lelv0266.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 02DFleei090982 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Fri, 13 Mar 2020 10:47:40 -0500 Received: from DFLE103.ent.ti.com (10.64.6.24) by DFLE105.ent.ti.com (10.64.6.26) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1847.3; Fri, 13 Mar 2020 10:47:40 -0500 Received: from fllv0040.itg.ti.com (10.64.41.20) by DFLE103.ent.ti.com (10.64.6.24) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1847.3 via Frontend Transport; Fri, 13 Mar 2020 10:47:40 -0500 Received: from pratyush-OptiPlex-790.dhcp.ti.com (ileax41-snat.itg.ti.com [10.172.224.153]) by fllv0040.itg.ti.com (8.15.2/8.15.2) with ESMTP id 02DFkkSQ034352; Fri, 13 Mar 2020 10:47:36 -0500 From: Pratyush Yadav To: Tudor Ambarus , Miquel Raynal , Richard Weinberger , Vignesh Raghavendra , Mark Brown , Nicolas Ferre , Alexandre Belloni , Ludovic Desroches Subject: [PATCH v3 12/12] mtd: spi-nor: add support for Cypress Semper flash Date: Fri, 13 Mar 2020 21:16:45 +0530 Message-ID: <20200313154645.29293-13-p.yadav@ti.com> X-Mailer: git-send-email 2.25.0 In-Reply-To: <20200313154645.29293-1-p.yadav@ti.com> References: <20200313154645.29293-1-p.yadav@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20200313_084744_971218_B67800C9 X-CRM114-Status: GOOD ( 20.62 ) X-Spam-Score: -2.5 (--) X-Spam-Report: SpamAssassin version 3.4.3 on bombadil.infradead.org summary: Content analysis details: (-2.5 points) pts rule name description ---- ---------------------- -------------------------------------------------- -2.3 RCVD_IN_DNSWL_MED RBL: Sender listed at https://www.dnswl.org/, medium trust [198.47.19.142 listed in list.dnswl.org] 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record -0.0 SPF_PASS SPF: sender matches SPF record -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from envelope-from domain -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.0 DKIMWL_WL_HIGH DKIMwl.org - Whitelisted High sender X-BeenThere: linux-mtd@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Sekhar Nori , linux-kernel@vger.kernel.org, linux-spi@vger.kernel.org, linux-mtd@lists.infradead.org, Pratyush Yadav , linux-arm-kernel@lists.infradead.org Sender: "linux-mtd" Errors-To: linux-mtd-bounces+incoming=patchwork.ozlabs.org@lists.infradead.org The Cypress Semper flash is an xSPI compliant octal DTR flash. Add support for using it in octal DTR mode. The flash by default boots in a hybrid sector mode. But the sector map table on the part I had was programmed incorrectly and the SMPT values on the flash don't match the public datasheet. Specifically, in some places erase type 3 was used instead of 4. In addition, the region sizes were incorrect in some places. So, for testing I set CFR3N[3] to enable uniform sector sizes. Since the uniform sector mode bit is a non-volatile bit, this series does not change it to avoid making any permanent changes to the flash configuration. The correct data to implement a fixup is not available right now and will be done in a follow-up patch if needed. Signed-off-by: Pratyush Yadav --- drivers/mtd/spi-nor/spi-nor.c | 156 ++++++++++++++++++++++++++++++++++ include/linux/mtd/spi-nor.h | 13 +++ 2 files changed, 169 insertions(+) diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index 32f7ecbc38d4..daaff3dc7376 100644 --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -264,6 +264,10 @@ struct flash_info { #define SPI_NOR_SRST_SLEEP_MIN 200 #define SPI_NOR_SRST_SLEEP_MAX 400 +/* Forward declaration that will be used by s28hs512t_post_sfdp_fixup(). */ +static void spi_nor_set_pp_settings(struct spi_nor_pp_command *pp, + u8 opcode, enum spi_nor_protocol proto); + /** * spi_nor_get_cmd_ext() - Get the command opcode extension based on the * extension type. @@ -2297,6 +2301,84 @@ static int spi_nor_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len) return ret; } +/** + * spi_nor_cypress_octal_enable() - Enable octal DTR mode on Cypress flashes. + * @nor: pointer to a 'struct spi_nor' + * + * This also sets the memory access latency cycles to 20, which is the default + * in the spi-nor framework. + * + * Return: 0 on success, -errno otherwise. + */ +static int spi_nor_cypress_octal_enable(struct spi_nor *nor, bool enable) +{ + struct spi_mem_op op; + u8 *buf = nor->bouncebuf; + u8 addr_width; + int ret; + + if (enable) + addr_width = 3; + else + addr_width = 4; + + if (enable) { + /* Use 20 dummy cycles for memory array reads. */ + ret = spi_nor_write_enable(nor); + if (ret) + return ret; + + *buf = SPINOR_REG_CYPRESS_CFR2V_MEMLAT_8_20; + op = (struct spi_mem_op) + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WR_ANY_REG, 1), + SPI_MEM_OP_ADDR(addr_width, + SPINOR_REG_CYPRESS_CFR2V, + 1), + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_OUT(1, buf, 1)); + ret = spi_mem_exec_op(nor->spimem, &op); + if (ret) { + dev_warn(nor->dev, + "failed to set default memory latency value: %d\n", + ret); + return ret; + } + ret = spi_nor_wait_till_ready(nor); + if (ret) + return ret; + + nor->read_dummy = 20; + } + + /* Set/unset the octal and DTR enable bits. */ + ret = spi_nor_write_enable(nor); + if (ret) + return ret; + + if (enable) + *buf = SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_EN; + else + *buf = SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_DS; + op = (struct spi_mem_op) + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WR_ANY_REG, 1), + SPI_MEM_OP_ADDR(addr_width, + SPINOR_REG_CYPRESS_CFR5V, + 1), + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_OUT(1, buf, 1)); + + if (!enable) + spi_nor_spimem_setup_op(nor, &op, SNOR_PROTO_8_8_8_DTR); + + ret = spi_mem_exec_op(nor->spimem, &op); + if (ret) { + dev_warn(nor->dev, "Failed to enable octal DTR mode\n"); + return ret; + } + + return 0; +} + /** * spi_nor_sr1_bit6_quad_enable() - Set the Quad Enable BIT(6) in the Status * Register 1. @@ -2509,6 +2591,77 @@ static struct spi_nor_fixups gd25q256_fixups = { .default_init = gd25q256_default_init, }; +static void s28hs512t_default_init(struct spi_nor *nor) +{ + nor->params.octal_dtr_enable = spi_nor_cypress_octal_enable; +} + +static void s28hs512t_post_sfdp_fixup(struct spi_nor *nor) +{ + /* + * On older versions of the flash the xSPI Profile 1.0 table has the + * 8D-8D-8D Fast Read opcode as 0x00. But it actually should be 0xEE. + */ + if (nor->params.reads[SNOR_CMD_READ_8_8_8_DTR].opcode == 0) + nor->params.reads[SNOR_CMD_READ_8_8_8_DTR].opcode = + SPINOR_OP_CYPRESS_RD_FAST; + + /* This flash is also missing the 4-byte Page Program opcode bit. */ + spi_nor_set_pp_settings(&nor->params.page_programs[SNOR_CMD_PP], + SPINOR_OP_PP_4B, SNOR_PROTO_1_1_1); + /* + * Since xSPI Page Program opcode is backward compatible with + * Legacy SPI, use Legacy SPI opcode there as well. + */ + spi_nor_set_pp_settings(&nor->params.page_programs[SNOR_CMD_PP_8_8_8_DTR], + SPINOR_OP_PP_4B, SNOR_PROTO_8_8_8_DTR); + + /* + * The xSPI Profile 1.0 table advertises the number of additional + * address bytes needed for Read Status Register command as 0 but the + * actual value for that is 4. + */ + nor->params.rdsr_addr_nbytes = 4; +} + +static int s28hs512t_post_bfpt_fixup(struct spi_nor *nor, + const struct sfdp_parameter_header *bfpt_header, + const struct sfdp_bfpt *bfpt, + struct spi_nor_flash_parameter *params) +{ + struct spi_mem_op op; + u8 *buf = nor->bouncebuf; + u8 addr_width = 3; + int ret; + + /* + * The BFPT table advertises a 512B page size but the page size is + * actually configurable (with the default being 256B). Read from + * CFR3V[4] and set the correct size. + */ + op = (struct spi_mem_op) + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RD_ANY_REG, 1), + SPI_MEM_OP_ADDR(addr_width, SPINOR_REG_CYPRESS_CFR3V, 1), + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_IN(1, buf, 1)); + ret = spi_mem_exec_op(nor->spimem, &op); + if (ret) + return ret; + + if (*buf & SPINOR_REG_CYPRESS_CFR3V_PGSZ) + params->page_size = 512; + else + params->page_size = 256; + + return 0; +} + +static struct spi_nor_fixups s28hs512t_fixups = { + .default_init = s28hs512t_default_init, + .post_sfdp = s28hs512t_post_sfdp_fixup, + .post_bfpt = s28hs512t_post_bfpt_fixup, +}; + /* NOTE: double check command sets and memory organization when you add * more nor chips. This current list focusses on newer chips, which * have been converging on command sets which including JEDEC ID. @@ -2771,6 +2924,9 @@ static const struct flash_info spi_nor_ids[] = { { "s25fl064l", INFO(0x016017, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) }, { "s25fl128l", INFO(0x016018, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) }, { "s25fl256l", INFO(0x016019, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) }, + { "s28hs512t", INFO(0x345b1a, 0, 256 * 1024, 256, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_SOFT_RESET) + .fixups = &s28hs512t_fixups, + }, /* SST -- large erase sizes are "overlays", "sectors" are 4K */ { "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024, 8, SECT_4K | SST_WRITE) }, diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index 13679197dec1..20337bcda207 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -154,6 +154,19 @@ #define SR2_QUAD_EN_BIT1 BIT(1) #define SR2_QUAD_EN_BIT7 BIT(7) +/* For Cypress flash. */ +#define SPINOR_OP_RD_ANY_REG 0x65 /* Read any register */ +#define SPINOR_OP_WR_ANY_REG 0x71 /* Write any register */ +#define SPINOR_REG_CYPRESS_CFR2V 0x00800003 +#define SPINOR_REG_CYPRESS_CFR2V_MEMLAT_8_20 0x8 +#define SPINOR_REG_CYPRESS_CFR3V 0x00800004 +#define SPINOR_REG_CYPRESS_CFR3V_PGSZ BIT(4) /* Page size. */ +#define SPINOR_REG_CYPRESS_CFR4V 0x00800005 +#define SPINOR_REG_CYPRESS_CFR5V 0x00800006 +#define SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_EN 0x3 +#define SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_DS 0 +#define SPINOR_OP_CYPRESS_RD_FAST 0xee + /* Supported SPI protocols */ #define SNOR_PROTO_INST_MASK GENMASK(23, 16) #define SNOR_PROTO_INST_SHIFT 16