diff mbox series

[v2,4/5] mtd: spi_nor: pass DMA-able buffer to spi_nor_read_raw()

Message ID 20181109165644.30534-5-tudor.ambarus@microchip.com
State Accepted
Delegated to: Boris Brezillon
Headers show
Series mtd: spi-nor: fixes found when debugging smpt | expand

Commit Message

Tudor Ambarus Nov. 9, 2018, 4:56 p.m. UTC 
spi_nor_read_raw() calls nor->read() which might be implemented
by the m25p80 driver. m25p80 uses the spi-mem layer which requires
DMA-able in/out buffers. Pass kmalloc'ed dma buffer to spi_nor_read_raw().

Fixes: b038e8e3be72 ("mtd: spi-nor: parse SFDP Sector Map Parameter Table")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
v2: drop GFP_DMA, rename buf, add comment

 drivers/mtd/spi-nor/spi-nor.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

Comments

Boris Brezillon Nov. 15, 2018, 1:25 p.m. UTC | #1 
On Fri, 2018-11-09 at 16:56:54 UTC,  wrote:
> spi_nor_read_raw() calls nor->read() which might be implemented
> by the m25p80 driver. m25p80 uses the spi-mem layer which requires
> DMA-able in/out buffers. Pass kmalloc'ed dma buffer to spi_nor_read_raw().
> 
> Fixes: b038e8e3be72 ("mtd: spi-nor: parse SFDP Sector Map Parameter Table")
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>

Applied to http://git.infradead.org/linux-mtd.git mtd/fixes, thanks.

Boris
diff mbox series

Patch

diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index 04a1c5b825e6..458ca8321999 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -2161,7 +2161,7 @@  spi_nor_set_pp_settings(struct spi_nor_pp_command *pp,
  * @nor:	pointer to a 'struct spi_nor'
  * @addr:	offset in the serial flash memory
  * @len:	number of bytes to read
- * @buf:	buffer where the data is copied into
+ * @buf:	buffer where the data is copied into (dma-safe memory)
  *
  * Return: 0 on success, -errno otherwise.
  */
@@ -2868,11 +2868,17 @@  static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt,
 					 u8 smpt_len)
 {
 	const u32 *ret;
+	u8 *buf;
 	u32 addr;
 	int err;
 	u8 i;
 	u8 addr_width, read_opcode, read_dummy;
-	u8 read_data_mask, data_byte, map_id;
+	u8 read_data_mask, map_id;
+
+	/* Use a kmalloc'ed bounce buffer to guarantee it is DMA-able. */
+	buf = kmalloc(sizeof(*buf), GFP_KERNEL);
+	if (!buf)
+		return ERR_PTR(-ENOMEM);
 
 	addr_width = nor->addr_width;
 	read_dummy = nor->read_dummy;
@@ -2890,7 +2896,7 @@  static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt,
 		nor->read_opcode = SMPT_CMD_OPCODE(smpt[i]);
 		addr = smpt[i + 1];
 
-		err = spi_nor_read_raw(nor, addr, 1, &data_byte);
+		err = spi_nor_read_raw(nor, addr, 1, buf);
 		if (err) {
 			ret = ERR_PTR(err);
 			goto out;
@@ -2900,7 +2906,7 @@  static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt,
 		 * Build an index value that is used to select the Sector Map
 		 * Configuration that is currently in use.
 		 */
-		map_id = map_id << 1 | !!(data_byte & read_data_mask);
+		map_id = map_id << 1 | !!(*buf & read_data_mask);
 	}
 
 	/*
@@ -2931,6 +2937,7 @@  static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt,
 
 	/* fall through */
 out:
+	kfree(buf);
 	nor->addr_width = addr_width;
 	nor->read_dummy = read_dummy;
 	nor->read_opcode = read_opcode;