diff mbox series

[v6,1/6] mtd: rawnand: marvell: Handle on-die ECC

Message ID 20180624224448.21872-2-chris.packham@alliedtelesis.co.nz
State Accepted
Delegated to: Miquel Raynal
Headers show
Series mtd: rawnand: support MT29F1G08ABAFAWP-ITE:F | expand

Commit Message

Chris Packham June 24, 2018, 10:44 p.m. UTC 
From the controllers point of view this is the same as no or
software only ECC.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
---
Changes in v2:
- New
Changes in v3:
- Add review from Boris
Changes in v4:
- None
Changes in v5:
- None
Changes in v6:
- None

 drivers/mtd/nand/raw/marvell_nand.c | 1 +
 1 file changed, 1 insertion(+)
diff mbox series

Patch

diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c
index ebb1d141b900..ba6889bbe802 100644
--- a/drivers/mtd/nand/raw/marvell_nand.c
+++ b/drivers/mtd/nand/raw/marvell_nand.c
@@ -2157,6 +2157,7 @@  static int marvell_nand_ecc_init(struct mtd_info *mtd,
 		break;
 	case NAND_ECC_NONE:
 	case NAND_ECC_SOFT:
+	case NAND_ECC_ON_DIE:
 		if (!nfc->caps->is_nfcv2 && mtd->writesize != SZ_512 &&
 		    mtd->writesize != SZ_2K) {
 			dev_err(nfc->dev, "NFCv1 cannot write %d bytes pages\n",