From patchwork Tue Apr 10 22:44:38 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Boris Brezillon X-Patchwork-Id: 896972 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=none (mailfrom) smtp.mailfrom=lists.infradead.org (client-ip=2607:7c80:54:e::133; helo=bombadil.infradead.org; envelope-from=linux-mtd-bounces+incoming=patchwork.ozlabs.org@lists.infradead.org; receiver=) Authentication-Results: ozlabs.org; dmarc=none (p=none dis=none) header.from=bootlin.com Authentication-Results: ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="r5/LhGWi"; dkim-atps=neutral Received: from bombadil.infradead.org (bombadil.infradead.org [IPv6:2607:7c80:54:e::133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by ozlabs.org (Postfix) with ESMTPS id 40LMp56wPMz9s0t for ; Wed, 11 Apr 2018 08:50:37 +1000 (AEST) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:MIME-Version:Cc:List-Subscribe: List-Help:List-Post:List-Archive:List-Unsubscribe:List-Id:References: In-Reply-To:Message-Id:Date:Subject:To:From:Reply-To:Content-ID: Content-Description:Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc :Resent-Message-ID:List-Owner; bh=b1iEdJJTMBOKTdNN+7lry3zQRlnqDg7ztpqj35EQg6w=; b=r5/LhGWiEm8Yb9nJHvkTQrn05t 30MppLlWsSMHtxiWMQyJagpc5ncKlRqHiw9kismpA5RUJfhXn7JE77HC7wd1d/wQ8B6Cp/RfI6OgS mjm05pfO6WceUtU2jcum5srsHq8n0pMnbZ0ks+6puW88CgOTNLckQ0t2rUYNDnZRskCDpcz0dOzmH LraSDzw3FMlalurSMSccZTSb/NCKQB825ad1TwPDq4EomWolc+1ZzHsp10VR7cJQukQNp2blUnoMe 8GkKbXa3B5uWLcjH5c8h2IPI8TVHM0ghMbjbv/u4Aw0sFoxU5ZvPvdcAYA5Zyny6nQ6Kbs5q7dzbt igjFfEcQ==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.90_1 #2 (Red Hat Linux)) id 1f625p-00036t-Nv; Tue, 10 Apr 2018 22:50:25 +0000 Received: from mail.bootlin.com ([62.4.15.54]) by bombadil.infradead.org with esmtp (Exim 4.90_1 #2 (Red Hat Linux)) id 1f620j-0006Hk-M4 for linux-mtd@lists.infradead.org; Tue, 10 Apr 2018 22:45:17 +0000 Received: by mail.bootlin.com (Postfix, from userid 110) id 90C7920894; Wed, 11 Apr 2018 00:44:47 +0200 (CEST) X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on mail.bootlin.com X-Spam-Level: X-Spam-Status: No, score=-1.0 required=5.0 tests=ALL_TRUSTED,SHORTCIRCUIT shortcircuit=ham autolearn=disabled version=3.4.0 Received: from localhost.localdomain (unknown [91.160.177.164]) by mail.bootlin.com (Postfix) with ESMTPSA id 20DE520894; Wed, 11 Apr 2018 00:44:47 +0200 (CEST) From: Boris Brezillon To: David Woodhouse , Brian Norris , Boris Brezillon , Marek Vasut , Richard Weinberger , Cyrille Pitchen , linux-mtd@lists.infradead.org, Miquel Raynal , Mark Brown , linux-spi@vger.kernel.org Subject: [PATCH v2 09/10] mtd: spi-nor: Use the spi_mem_xx() API Date: Wed, 11 Apr 2018 00:44:38 +0200 Message-Id: <20180410224439.9260-10-boris.brezillon@bootlin.com> X-Mailer: git-send-email 2.14.1 In-Reply-To: <20180410224439.9260-1-boris.brezillon@bootlin.com> References: <20180410224439.9260-1-boris.brezillon@bootlin.com> X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20180410_154510_129957_DFF76BB6 X-CRM114-Status: GOOD ( 26.06 ) X-Spam-Score: -0.0 (/) X-Spam-Report: SpamAssassin version 3.4.1 on bombadil.infradead.org summary: Content analysis details: (-0.0 points) pts rule name description ---- ---------------------- -------------------------------------------------- -0.0 RCVD_IN_DNSWL_NONE RBL: Sender listed at http://www.dnswl.org/, no trust [62.4.15.54 listed in list.dnswl.org] -0.0 SPF_PASS SPF: sender matches SPF record X-BeenThere: linux-mtd@lists.infradead.org X-Mailman-Version: 2.1.21 Precedence: list List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Yogesh Gaur , Vignesh R , Kamal Dasu , Maxime Chevallier , Peter Pan , Frieder Schrempf , =?utf-8?b?UmFmYcWCIE1pxYJlY2tp?= , Sourav Poddar MIME-Version: 1.0 Sender: "linux-mtd" Errors-To: linux-mtd-bounces+incoming=patchwork.ozlabs.org@lists.infradead.org The spi_mem_xxx() API has been introduced to replace the spi_flash_read() one. Make use of it so we can get rid of spi_flash_read(). Note that using spi_mem_xx() also simplifies the code because this API takes care of using the regular spi_sync() interface when the optimized ->mem_ops interface is not implemented by the controller. Signed-off-by: Boris Brezillon --- Changes in v2: - include spi-mem.h - treat op->addr.val differently since it's now an u64 - Replace SPI_MEM_OP_DATA_OUT() by SPI_MEM_OP_DATA_IN() in m25p80_read() --- drivers/mtd/devices/Kconfig | 1 + drivers/mtd/devices/m25p80.c | 236 +++++++++++++++---------------------------- 2 files changed, 80 insertions(+), 157 deletions(-) diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig index 6def5445e03e..57b02c4b3f63 100644 --- a/drivers/mtd/devices/Kconfig +++ b/drivers/mtd/devices/Kconfig @@ -81,6 +81,7 @@ config MTD_DATAFLASH_OTP config MTD_M25P80 tristate "Support most SPI Flash chips (AT26DF, M25P, W25X, ...)" depends on SPI_MASTER && MTD_SPI_NOR + select SPI_MEM help This enables access to most modern SPI flash chips, used for program and data storage. Series supported include Atmel AT26DF, diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index a4e18f6aaa33..3dc022d3b53e 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -24,12 +24,13 @@ #include #include +#include #include #include #define MAX_CMD_SIZE 6 struct m25p { - struct spi_device *spi; + struct spi_mem *spimem; struct spi_nor spi_nor; u8 command[MAX_CMD_SIZE]; }; @@ -37,97 +38,68 @@ struct m25p { static int m25p80_read_reg(struct spi_nor *nor, u8 code, u8 *val, int len) { struct m25p *flash = nor->priv; - struct spi_device *spi = flash->spi; + struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(code, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_IN(len, val, 1)); int ret; - ret = spi_write_then_read(spi, &code, 1, val, len); + ret = spi_mem_exec_op(flash->spimem, &op); if (ret < 0) - dev_err(&spi->dev, "error %d reading %x\n", ret, code); + dev_err(&flash->spimem->spi->dev, "error %d reading %x\n", ret, + code); return ret; } -static void m25p_addr2cmd(struct spi_nor *nor, unsigned int addr, u8 *cmd) -{ - /* opcode is in cmd[0] */ - cmd[1] = addr >> (nor->addr_width * 8 - 8); - cmd[2] = addr >> (nor->addr_width * 8 - 16); - cmd[3] = addr >> (nor->addr_width * 8 - 24); - cmd[4] = addr >> (nor->addr_width * 8 - 32); -} - -static int m25p_cmdsz(struct spi_nor *nor) -{ - return 1 + nor->addr_width; -} - static int m25p80_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len) { struct m25p *flash = nor->priv; - struct spi_device *spi = flash->spi; - - flash->command[0] = opcode; - if (buf) - memcpy(&flash->command[1], buf, len); + struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(opcode, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_OUT(len, buf, 1)); - return spi_write(spi, flash->command, len + 1); + return spi_mem_exec_op(flash->spimem, &op); } static ssize_t m25p80_write(struct spi_nor *nor, loff_t to, size_t len, const u_char *buf) { struct m25p *flash = nor->priv; - struct spi_device *spi = flash->spi; - unsigned int inst_nbits, addr_nbits, data_nbits, data_idx; - struct spi_transfer t[3] = {}; - struct spi_message m; - int cmd_sz = m25p_cmdsz(nor); - ssize_t ret; + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(nor->program_opcode, 1), + SPI_MEM_OP_ADDR(nor->addr_width, to, 1), + SPI_MEM_OP_DUMMY(0, 1), + SPI_MEM_OP_DATA_OUT(len, buf, 1)); + size_t remaining = len; + int ret; /* get transfer protocols. */ - inst_nbits = spi_nor_get_protocol_inst_nbits(nor->write_proto); - addr_nbits = spi_nor_get_protocol_addr_nbits(nor->write_proto); - data_nbits = spi_nor_get_protocol_data_nbits(nor->write_proto); - - spi_message_init(&m); + op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(nor->write_proto); + op.addr.buswidth = spi_nor_get_protocol_addr_nbits(nor->write_proto); + op.dummy.buswidth = op.addr.buswidth; + op.data.buswidth = spi_nor_get_protocol_data_nbits(nor->write_proto); if (nor->program_opcode == SPINOR_OP_AAI_WP && nor->sst_write_second) - cmd_sz = 1; - - flash->command[0] = nor->program_opcode; - m25p_addr2cmd(nor, to, flash->command); + op.addr.nbytes = 0; - t[0].tx_buf = flash->command; - t[0].tx_nbits = inst_nbits; - t[0].len = cmd_sz; - spi_message_add_tail(&t[0], &m); - - /* split the op code and address bytes into two transfers if needed. */ - data_idx = 1; - if (addr_nbits != inst_nbits) { - t[0].len = 1; + while (remaining) { + op.data.nbytes = remaining < UINT_MAX ? remaining : UINT_MAX; + ret = spi_mem_adjust_op_size(flash->spimem, &op); + if (ret) + return ret; - t[1].tx_buf = &flash->command[1]; - t[1].tx_nbits = addr_nbits; - t[1].len = cmd_sz - 1; - spi_message_add_tail(&t[1], &m); + ret = spi_mem_exec_op(flash->spimem, &op); + if (ret) + return ret; - data_idx = 2; + op.addr.val += op.data.nbytes; + remaining -= op.data.nbytes; + op.data.buf.out += op.data.nbytes; } - t[data_idx].tx_buf = buf; - t[data_idx].tx_nbits = data_nbits; - t[data_idx].len = len; - spi_message_add_tail(&t[data_idx], &m); - - ret = spi_sync(spi, &m); - if (ret) - return ret; - - ret = m.actual_length - cmd_sz; - if (ret < 0) - return -EIO; - return ret; + return len; } /* @@ -138,92 +110,39 @@ static ssize_t m25p80_read(struct spi_nor *nor, loff_t from, size_t len, u_char *buf) { struct m25p *flash = nor->priv; - struct spi_device *spi = flash->spi; - unsigned int inst_nbits, addr_nbits, data_nbits, data_idx; - struct spi_transfer t[3]; - struct spi_message m; - unsigned int dummy = nor->read_dummy; - ssize_t ret; - int cmd_sz; + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(nor->read_opcode, 1), + SPI_MEM_OP_ADDR(nor->addr_width, from, 1), + SPI_MEM_OP_DUMMY(nor->read_dummy, 1), + SPI_MEM_OP_DATA_IN(len, buf, 1)); + size_t remaining = len; + int ret; /* get transfer protocols. */ - inst_nbits = spi_nor_get_protocol_inst_nbits(nor->read_proto); - addr_nbits = spi_nor_get_protocol_addr_nbits(nor->read_proto); - data_nbits = spi_nor_get_protocol_data_nbits(nor->read_proto); + op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(nor->read_proto); + op.addr.buswidth = spi_nor_get_protocol_addr_nbits(nor->read_proto); + op.dummy.buswidth = op.addr.buswidth; + op.data.buswidth = spi_nor_get_protocol_data_nbits(nor->read_proto); /* convert the dummy cycles to the number of bytes */ - dummy = (dummy * addr_nbits) / 8; - - if (spi_flash_read_supported(spi)) { - struct spi_flash_read_message msg; - - memset(&msg, 0, sizeof(msg)); + op.dummy.nbytes = (nor->read_dummy * op.dummy.buswidth) / 8; - msg.buf = buf; - msg.from = from; - msg.len = len; - msg.read_opcode = nor->read_opcode; - msg.addr_width = nor->addr_width; - msg.dummy_bytes = dummy; - msg.opcode_nbits = inst_nbits; - msg.addr_nbits = addr_nbits; - msg.data_nbits = data_nbits; - - ret = spi_flash_read(spi, &msg); - if (ret < 0) + while (remaining) { + op.data.nbytes = remaining < UINT_MAX ? remaining : UINT_MAX; + ret = spi_mem_adjust_op_size(flash->spimem, &op); + if (ret) return ret; - return msg.retlen; - } - spi_message_init(&m); - memset(t, 0, (sizeof t)); - - flash->command[0] = nor->read_opcode; - m25p_addr2cmd(nor, from, flash->command); - - t[0].tx_buf = flash->command; - t[0].tx_nbits = inst_nbits; - t[0].len = m25p_cmdsz(nor) + dummy; - spi_message_add_tail(&t[0], &m); - - /* - * Set all dummy/mode cycle bits to avoid sending some manufacturer - * specific pattern, which might make the memory enter its Continuous - * Read mode by mistake. - * Based on the different mode cycle bit patterns listed and described - * in the JESD216B specification, the 0xff value works for all memories - * and all manufacturers. - */ - cmd_sz = t[0].len; - memset(flash->command + cmd_sz - dummy, 0xff, dummy); - - /* split the op code and address bytes into two transfers if needed. */ - data_idx = 1; - if (addr_nbits != inst_nbits) { - t[0].len = 1; - - t[1].tx_buf = &flash->command[1]; - t[1].tx_nbits = addr_nbits; - t[1].len = cmd_sz - 1; - spi_message_add_tail(&t[1], &m); + ret = spi_mem_exec_op(flash->spimem, &op); + if (ret) + return ret; - data_idx = 2; + op.addr.val += op.data.nbytes; + remaining -= op.data.nbytes; + op.data.buf.in += op.data.nbytes; } - t[data_idx].rx_buf = buf; - t[data_idx].rx_nbits = data_nbits; - t[data_idx].len = min3(len, spi_max_transfer_size(spi), - spi_max_message_size(spi) - cmd_sz); - spi_message_add_tail(&t[data_idx], &m); - - ret = spi_sync(spi, &m); - if (ret) - return ret; - - ret = m.actual_length - cmd_sz; - if (ret < 0) - return -EIO; - return ret; + return len; } /* @@ -231,8 +150,9 @@ static ssize_t m25p80_read(struct spi_nor *nor, loff_t from, size_t len, * matches what the READ command supports, at least until this driver * understands FAST_READ (for clocks over 25 MHz). */ -static int m25p_probe(struct spi_device *spi) +static int m25p_probe(struct spi_mem *spimem) { + struct spi_device *spi = spimem->spi; struct flash_platform_data *data; struct m25p *flash; struct spi_nor *nor; @@ -244,9 +164,9 @@ static int m25p_probe(struct spi_device *spi) char *flash_name; int ret; - data = dev_get_platdata(&spi->dev); + data = dev_get_platdata(&spimem->spi->dev); - flash = devm_kzalloc(&spi->dev, sizeof(*flash), GFP_KERNEL); + flash = devm_kzalloc(&spimem->spi->dev, sizeof(*flash), GFP_KERNEL); if (!flash) return -ENOMEM; @@ -258,12 +178,12 @@ static int m25p_probe(struct spi_device *spi) nor->write_reg = m25p80_write_reg; nor->read_reg = m25p80_read_reg; - nor->dev = &spi->dev; + nor->dev = &spimem->spi->dev; spi_nor_set_flash_node(nor, spi->dev.of_node); nor->priv = flash; spi_set_drvdata(spi, flash); - flash->spi = spi; + flash->spimem = spimem; if (spi->mode & SPI_RX_QUAD) { hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4; @@ -303,9 +223,9 @@ static int m25p_probe(struct spi_device *spi) } -static int m25p_remove(struct spi_device *spi) +static int m25p_remove(struct spi_mem *spimem) { - struct m25p *flash = spi_get_drvdata(spi); + struct m25p *flash = spi_mem_get_drvdata(spimem); spi_nor_restore(&flash->spi_nor); @@ -313,9 +233,9 @@ static int m25p_remove(struct spi_device *spi) return mtd_device_unregister(&flash->spi_nor.mtd); } -static void m25p_shutdown(struct spi_device *spi) +static void m25p_shutdown(struct spi_mem *spimem) { - struct m25p *flash = spi_get_drvdata(spi); + struct m25p *flash = spi_mem_get_drvdata(spimem); spi_nor_restore(&flash->spi_nor); } @@ -386,12 +306,14 @@ static const struct of_device_id m25p_of_table[] = { }; MODULE_DEVICE_TABLE(of, m25p_of_table); -static struct spi_driver m25p80_driver = { - .driver = { - .name = "m25p80", - .of_match_table = m25p_of_table, +static struct spi_mem_driver m25p80_driver = { + .spidrv = { + .driver = { + .name = "m25p80", + .of_match_table = m25p_of_table, + }, + .id_table = m25p_ids, }, - .id_table = m25p_ids, .probe = m25p_probe, .remove = m25p_remove, .shutdown = m25p_shutdown, @@ -402,7 +324,7 @@ static struct spi_driver m25p80_driver = { */ }; -module_spi_driver(m25p80_driver); +module_spi_mem_driver(m25p80_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Mike Lavender");