@@ -476,6 +476,7 @@ CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_NOMADIK=y
# CONFIG_MTD_ONENAND is not set
#
@@ -19,15 +19,106 @@
#include <linux/io.h>
#include <linux/param.h>
#include <asm/setup.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <asm/sizes.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <mach/setup.h>
+#include <mach/nand.h>
+#include <mach/fsmc.h>
+
+/* These adresses span 16MB, so use three individual pages */
+static struct resource nhk8815_nand_resources[] = {
+ {
+ .name = "nand_addr",
+ .start = NAND_IO_ADDR,
+ .end = NAND_IO_ADDR + 0xfff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "nand_cmd",
+ .start = NAND_IO_CMD,
+ .end = NAND_IO_CMD + 0xfff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "nand_data",
+ .start = NAND_IO_DATA,
+ .end = NAND_IO_DATA + 0xfff,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static int nhk8815_nand_init(void)
+{
+ /* FSMC setup for nand chip select (8-bit nand in 8815NHK) */
+ writel(0x0000000E, FSMC_PCR0);
+ writel(0x000D0A00, FSMC_PMEM0);
+ writel(0x00100A00, FSMC_PATT0);
+
+ /* enable access to the chip select area */
+ writel(readl(FSMC_PCR0) | 0x04, FSMC_PCR0);
+
+ return 0;
+}
+
+static struct mtd_partition nhk8815_partitions[] = {
+ {
+ .name = "X-Loader(NAND)",
+ .offset = 0,
+ .size = SZ_256K,
+ }, {
+ .name = "MemInit(NAND)",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_256K,
+ }, {
+ .name = "BootLoader(NAND)",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_2M,
+ }, {
+ .name = "Kernel zImage(NAND)",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 3 * SZ_1M,
+ }, {
+ .name = "Root Filesystem(NAND)",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 22* SZ_1M,
+ }, {
+ /* This can't be SIZ_FULL as we have the u-boot env */
+ .name = "User Filesystem(NAND)",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 100 * SZ_1M,
+ }, {
+ .name = "U-Boot Environment",
+ .offset = 0x8000000 - SZ_128K,
+ .size = SZ_128K,
+ }
+};
+
+static struct nomadik_nand_platform_data nhk8815_nand_data = {
+ .parts = nhk8815_partitions,
+ .nparts = ARRAY_SIZE(nhk8815_partitions),
+ .options = NAND_COPYBACK | NAND_CACHEPRG | NAND_NO_PADDING \
+ | NAND_NO_READRDY | NAND_NO_AUTOINCR,
+ .init = nhk8815_nand_init,
+};
+
+static struct platform_device nhk8815_nand_device = {
+ .name = "nomadik_nand",
+ .dev = {
+ .platform_data = &nhk8815_nand_data,
+ },
+ .resource = nhk8815_nand_resources,
+ .num_resources = ARRAY_SIZE(nhk8815_nand_resources),
+};
+
static struct platform_device *nhk8815_platform_devices[] __initdata = {
- /* currently empty, will add keypad, touchscreen etc */
+ &nhk8815_nand_device,
+ /* will add keypad, touchscreen etc */
};
static void __init nhk8815_map_io(void)
new file mode 100644
@@ -0,0 +1,36 @@
+
+/* Definitions for the Nomadik FSMC "Flexible Static Memory controller" */
+
+#ifndef __ASM_ARCH_FSMC_H
+#define __ASM_ARCH_FSMC_H
+
+#include <mach/hardware.h>
+/*
+ * Register list
+ */
+
+/* control and timing registers for CS0..CS3 */
+#define FSMC_BCR0 ((void __iomem *)(NOMADIK_FSMC_VA + 0x00))
+#define FSMC_BTR0 ((void __iomem *)(NOMADIK_FSMC_VA + 0x04))
+#define FSMC_BCR1 ((void __iomem *)(NOMADIK_FSMC_VA + 0x08))
+#define FSMC_BTR1 ((void __iomem *)(NOMADIK_FSMC_VA + 0x0c))
+#define FSMC_BCR2 ((void __iomem *)(NOMADIK_FSMC_VA + 0x10))
+#define FSMC_BTR2 ((void __iomem *)(NOMADIK_FSMC_VA + 0x14))
+#define FSMC_BCR3 ((void __iomem *)(NOMADIK_FSMC_VA + 0x18))
+#define FSMC_BTR3 ((void __iomem *)(NOMADIK_FSMC_VA + 0x1c))
+
+/* pc-card and nand flash */
+#define FSMC_PCR0 ((void __iomem *)(NOMADIK_FSMC_VA + 0x40))
+#define FSMC_PMEM0 ((void __iomem *)(NOMADIK_FSMC_VA + 0x48))
+#define FSMC_PATT0 ((void __iomem *)(NOMADIK_FSMC_VA + 0x4c))
+#define FSMC_PIO0 ((void __iomem *)(NOMADIK_FSMC_VA + 0x50))
+#define FSMC_PECCR0 ((void __iomem *)(NOMADIK_FSMC_VA + 0x54))
+
+#define FSMC_PCR1 ((void __iomem *)(NOMADIK_FSMC_VA + 0x60))
+#define FSMC_PMEM1 ((void __iomem *)(NOMADIK_FSMC_VA + 0x68))
+#define FSMC_PATT1 ((void __iomem *)(NOMADIK_FSMC_VA + 0x6c))
+#define FSMC_PIO1 ((void __iomem *)(NOMADIK_FSMC_VA + 0x70))
+#define FSMC_PECCR1 ((void __iomem *)(NOMADIK_FSMC_VA + 0x74))
+
+
+#endif /* __ASM_ARCH_FSMC_H */
@@ -82,7 +82,8 @@
#define NOMADIK_HAMACA_DMEM 0xA0200000 /* HAMACA Data Memory Space */
-#define NOMADIK_MTU0_VA (IO_ADDRESS(NOMADIK_MTU0_BASE))
-#define NOMADIK_MTU1_VA (IO_ADDRESS(NOMADIK_MTU1_BASE))
+#define NOMADIK_FSMC_VA IO_ADDRESS(NOMADIK_FSMC_BASE)
+#define NOMADIK_MTU0_VA IO_ADDRESS(NOMADIK_MTU0_BASE)
+#define NOMADIK_MTU1_VA IO_ADDRESS(NOMADIK_MTU1_BASE)
#endif /* __ASM_ARCH_HARDWARE_H */
new file mode 100644
@@ -0,0 +1,16 @@
+#ifndef __ASM_ARCH_NAND_H
+#define __ASM_ARCH_NAND_H
+
+struct nomadik_nand_platform_data {
+ struct mtd_partition *parts;
+ int nparts;
+ int options;
+ int (*init) (void);
+ int (*exit) (void);
+};
+
+#define NAND_IO_DATA 0x40000000
+#define NAND_IO_CMD 0x40800000
+#define NAND_IO_ADDR 0x41000000
+
+#endif /* __ASM_ARCH_NAND_H */
@@ -420,6 +420,12 @@ config MTD_NAND_MXC
This enables the driver for the NAND flash controller on the
MXC processors.
+config MTD_NAND_NOMADIK
+ tristate "ST Nomadik 8815 NAND support"
+ depends on ARCH_NOMADIK
+ help
+ Driver for the NAND flash controller on the Nomadik, with ECC.
+
config MTD_NAND_SH_FLCTL
tristate "Support for NAND on Renesas SuperH FLCTL"
depends on MTD_NAND && SUPERH && CPU_SUBTYPE_SH7723
@@ -36,5 +36,6 @@ obj-$(CONFIG_MTD_NAND_FSL_ELBC) += fsl_elbc_nand.o
obj-$(CONFIG_MTD_NAND_FSL_UPM) += fsl_upm.o
obj-$(CONFIG_MTD_NAND_SH_FLCTL) += sh_flctl.o
obj-$(CONFIG_MTD_NAND_MXC) += mxc_nand.o
+obj-$(CONFIG_MTD_NAND_NOMADIK) += nomadik_nand.o
nand-objs := nand_base.o nand_bbt.o
new file mode 100644
@@ -0,0 +1,329 @@
+/*
+ * drivers/mtd/nand/nomadik_nand.c
+ *
+ * Overview:
+ * Driver for on-board NAND flash on Nomadik Platforms
+ *
+ * Copyright (C) 2007 STMicroelectronics Pvt. Ltd.
+ * Author: Sachin Verma <sachin.verma@st.com>
+ *
+ * Copyright (C) 2009 Alessandro Rubini
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/io.h>
+#include <mach/nand.h>
+#include <mach/fsmc.h>
+
+#include <mtd/mtd-abi.h>
+
+struct nomadik_nand_host {
+ struct mtd_info mtd;
+ struct nand_chip nand;
+ void __iomem *data_va;
+ void __iomem *cmd_va;
+ void __iomem *addr_va;
+ struct nand_bbt_descr *bbt_desc;
+};
+
+static inline int parity(int b) /* uses low 8 bits: returns 0 or all-1 */
+{
+ b = b ^ (b >> 4);
+ b = b ^ (b >> 2);
+ return (b ^ (b >> 1)) & 1
+ ? ~0 : 0;
+}
+
+/*
+ * This is the ECC routine used in hardware, according to the manual.
+ * HW claims to make the calculation but not the correction. However,
+ * I haven't managed to get the desired data out of it; so do it in sw.
+ * There is problably some errata involved, but currently miss the info.
+ */
+static int nomadik_ecc512_calc(struct mtd_info *mtd, const u_char *data,
+ u_char *ecc)
+{
+ int gpar = 0;
+ int i, val, par;
+ int pbits = 0; /* P8, P16, ... P2048 */
+ int pprime = 0; /* P8', P16', ... P2048' */
+ int lowbits; /* P1, P2, P4 and primes */
+
+ for (i = 0; i < 512; i++) {
+ par = parity((val = data[i]));
+ gpar ^= val;
+ pbits ^= (i & par);
+ }
+ /*
+ * Ok, now gpar is global parity (xor of all bytes)
+ * pbits are all the parity bits (non-prime ones)
+ */
+ par = parity(gpar);
+ pprime = pbits ^ par;
+ /* Put low bits in the right position for ecc[2] (bits 7..2) */
+ lowbits = 0
+ | (parity(gpar & 0xf0) & 0x80) /* P4 */
+ | (parity(gpar & 0x0f) & 0x40) /* P4' */
+ | (parity(gpar & 0xcc) & 0x20) /* P2 */
+ | (parity(gpar & 0x33) & 0x10) /* P2' */
+ | (parity(gpar & 0xaa) & 0x08) /* P1 */
+ | (parity(gpar & 0x55) & 0x04); /* P1' */
+
+ ecc[2] = ~(lowbits | ((pbits & 0x100) >> 7) | ((pprime & 0x100) >> 8));
+ /* now intermix bits for ecc[1] (P1024..P128') and ecc[0] (P64..P8') */
+ ecc[1] = ~( (pbits & 0x80) >> 0 | ((pprime & 0x80) >> 1)
+ | ((pbits & 0x40) >> 1) | ((pprime & 0x40) >> 2)
+ | ((pbits & 0x20) >> 2) | ((pprime & 0x20) >> 3)
+ | ((pbits & 0x10) >> 3) | ((pprime & 0x10) >> 4));
+
+ ecc[0] = ~( (pbits & 0x8) << 4 | ((pprime & 0x8) << 3)
+ | ((pbits & 0x4) << 3) | ((pprime & 0x4) << 2)
+ | ((pbits & 0x2) << 2) | ((pprime & 0x2) << 1)
+ | ((pbits & 0x1) << 1) | ((pprime & 0x1) << 0));
+ return 0;
+}
+
+static int nomadik_ecc512_correct(struct mtd_info *mtd, uint8_t *dat,
+ uint8_t *r_ecc, uint8_t *c_ecc)
+{
+ struct nand_chip *chip = mtd->priv;
+ uint32_t r, c, d, diff; /*read, calculated, xor of them */
+
+ if (!memcmp(r_ecc, c_ecc, chip->ecc.bytes))
+ return 0;
+
+ /* Reorder the bytes into ascending-order 24 bits -- see manual */
+ r = r_ecc[2] << 22 | r_ecc[1] << 14 | r_ecc[0] << 6 | r_ecc[2] >> 2;
+ c = c_ecc[2] << 22 | c_ecc[1] << 14 | c_ecc[0] << 6 | c_ecc[2] >> 2;
+ diff = (r ^ c) & ((1 << 24) - 1); /* use 24 bits only */
+
+ /* If 12 bits are different, one per pair, it's correctable */
+ if (((diff | (diff>>1)) & 0x555555) == 0x555555) {
+ int bit = ((diff & 2) >> 1)
+ | ((diff & 0x8) >> 2) | ((diff & 0x20) >> 3);
+ int byte;
+
+ d = diff >> 6; /* remove bit-order info */
+ byte = ((d & 2) >> 1)
+ | ((d & 0x8) >> 2) | ((d & 0x20) >> 3)
+ | ((d & 0x80) >> 4) | ((d & 0x200) >> 5)
+ | ((d & 0x800) >> 6) | ((d & 0x2000) >> 7)
+ | ((d & 0x8000) >> 8) | ((d & 0x20000) >> 9);
+ /* correct the single bit */
+ dat[byte] ^= 1 << bit;
+ return 0;
+ }
+ /* If 1 bit only differs, it's one bit error in ECC, ignore */
+ if ((diff ^ (1 << (ffs(diff) - 1))) == 0)
+ return 0;
+ /* Otherwise, uncorrectable */
+ return -1;
+}
+
+static struct nand_ecclayout nomadik_ecc_layout = {
+ .eccbytes = 3 * 4,
+ .eccpos = { /* each subpage has 16 bytes: pos 2,3,4 hosts ECC */
+ 0x02, 0x03, 0x04,
+ 0x12, 0x13, 0x14,
+ 0x22, 0x23, 0x24,
+ 0x32, 0x33, 0x34},
+ /* let's keep bytes 5,6,7 for us, just in case we change ECC algo */
+ .oobfree = { {0x08, 0x08}, {0x18, 0x08}, {0x28, 0x08}, {0x38, 0x08} },
+};
+
+static void nomadik_ecc_control(struct mtd_info *mtd, int mode)
+{
+ /* No need to enable hw ecc, it's on by default */
+}
+
+static void nomadik_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct nand_chip *nand = mtd->priv;
+ struct nomadik_nand_host *host = nand->priv;
+
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ if (ctrl & NAND_CLE)
+ writeb(cmd, host->cmd_va);
+ else
+ writeb(cmd, host->addr_va);
+}
+
+static int nomadik_nand_probe(struct platform_device *pdev)
+{
+ struct nomadik_nand_platform_data *pdata = pdev->dev.platform_data;
+ struct nomadik_nand_host *host;
+ struct mtd_info *mtd;
+ struct nand_chip *nand;
+ struct resource *res;
+ int ret = 0;
+
+ /* Allocate memory for the device structure (and zero it) */
+ host = kzalloc(sizeof(struct nomadik_nand_host), GFP_KERNEL);
+ if (!host) {
+ dev_err(&pdev->dev, "Failed to allocate device structure.\n");
+ return -ENOMEM;
+ }
+
+ /* Call the client's init function, if any */
+ if (pdata->init && (ret = pdata->init()) < 0) {
+ dev_err(&pdev->dev, "Init function failed\n");
+ goto err;
+ }
+
+ /* ioremap three regions */
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_addr");
+ if (!res) {ret = -EIO; goto err_unmap; }
+ host->addr_va = ioremap(res->start, res->end - res->start + 1);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_data");
+ if (!res) {ret = -EIO; goto err_unmap; }
+ host->data_va = ioremap(res->start, res->end - res->start + 1);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_cmd");
+ if (!res) {ret = -EIO; goto err_unmap; }
+ host->cmd_va = ioremap(res->start, res->end - res->start + 1);
+
+ if (!host->addr_va || !host->data_va || !host->cmd_va) {
+ ret = -ENOMEM;
+ goto err_unmap;
+ }
+
+ /* Link all private pointers */
+ mtd = &host->mtd;
+ nand = &host->nand;
+ mtd->priv = nand;
+ nand->priv = host;
+
+ host->mtd.owner = THIS_MODULE;
+ nand->IO_ADDR_R = host->data_va;
+ nand->IO_ADDR_W = host->data_va;
+ nand->cmd_ctrl = nomadik_cmd_ctrl;
+
+ nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.layout = &nomadik_ecc_layout;
+ nand->ecc.calculate = nomadik_ecc512_calc;
+ nand->ecc.correct = nomadik_ecc512_correct;
+ nand->ecc.hwctl = nomadik_ecc_control;
+ nand->ecc.size = 512;
+ nand->ecc.bytes = 3;
+
+ nand->options = pdata->options;
+
+ /*
+ * Scan to find existance of the device
+ */
+ if (nand_scan(&host->mtd, 1)) {
+ ret = -ENXIO;
+ goto err_unmap;
+ }
+
+#ifdef CONFIG_MTD_PARTITIONS
+ add_mtd_partitions(&host->mtd, pdata->parts, pdata->nparts);
+#else
+ pr_info("Registering %s as whole device\n", mtd->name);
+ add_mtd_device(mtd);
+#endif
+
+ platform_set_drvdata(pdev, host);
+ return 0;
+
+ err_unmap:
+ if (host->cmd_va) iounmap(host->cmd_va);
+ if (host->data_va) iounmap(host->data_va);
+ if (host->addr_va) iounmap(host->addr_va);
+ err:
+ kfree(host);
+ return ret;
+}
+
+/*
+ * Clean up routine
+ */
+static int nomadik_nand_remove(struct platform_device *pdev)
+{
+ struct nomadik_nand_host *host = platform_get_drvdata(pdev);
+ struct nomadik_nand_platform_data *pdata = pdev->dev.platform_data;
+
+ if (pdata->exit)
+ pdata->exit();
+
+ if (host) {
+ iounmap(host->cmd_va);
+ iounmap(host->data_va);
+ iounmap(host->addr_va);
+ kfree(host);
+ }
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int nomadik_nand_suspend(struct platform_device *pdev,
+ pm_message_t state)
+{
+ struct nomadik_nand_host *host = platform_get_drvdata(pdev);
+ int ret = 0;
+ if (host)
+ ret = host->mtd.suspend(&host->mtd);
+ return ret;
+}
+
+static int nomadik_nand_resume(struct platform_device *pdev)
+{
+ struct nomadik_nand_host *host = platform_get_drvdata(pdev);
+ if (host)
+ host->mtd.resume(&host->mtd);
+ return 0;
+}
+
+#else
+#define nomadik_nand_suspend NULL
+#define nomadik_nand_resume NULL
+#endif /* CONFIG_PM */
+
+static struct platform_driver nomadik_nand_driver = {
+ .probe = nomadik_nand_probe,
+ .remove = nomadik_nand_remove,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "nomadik_nand",
+ },
+ .suspend = nomadik_nand_suspend,
+ .resume = nomadik_nand_resume,
+};
+
+static int __init nand_nomadik_init(void)
+{
+ pr_info("Nomadik NAND driver\n");
+ return platform_driver_register(&nomadik_nand_driver);
+}
+
+static void __exit nand_nomadik_exit(void)
+{
+ platform_driver_unregister(&nomadik_nand_driver);
+}
+
+module_init(nand_nomadik_init);
+module_exit(nand_nomadik_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("ST Microelectronics (sachin.verma@st.com)");
+MODULE_DESCRIPTION("NAND driver for Nomadik Platform");
From: Alessandro Rubini <rubini@unipv.it> The patch is incremental over base Nomadik support as posted to linux-arm-kernel. --- V2: rebased over cleaned-up base nomadik support. The new nomadik patch is available in full from http://gnudd.com/pub/patches/nomadik/ Add-basic-support-for-ST-Nomadik-8815-SoC-V2.patch The version posted to linux-arm-kernel misses the default configuration file for size reasons. arch/arm/configs/nhk15_defconfig | 1 + arch/arm/mach-nomadik/board-8815nhk.c | 93 +++++++- arch/arm/mach-nomadik/include/mach/fsmc.h | 36 +++ arch/arm/mach-nomadik/include/mach/hardware.h | 5 +- arch/arm/mach-nomadik/include/mach/nand.h | 16 ++ drivers/mtd/nand/Kconfig | 6 + drivers/mtd/nand/Makefile | 1 + drivers/mtd/nand/nomadik_nand.c | 329 +++++++++++++++++++++++++ 8 files changed, 484 insertions(+), 3 deletions(-) create mode 100644 arch/arm/mach-nomadik/include/mach/fsmc.h create mode 100644 arch/arm/mach-nomadik/include/mach/nand.h create mode 100644 drivers/mtd/nand/nomadik_nand.c