diff mbox series

[v1,2/2] spi: nor: update page program settings for is25wp256 using post bfpt fixup

Message ID 1589457051-5410-3-git-send-email-sagar.kadam@sifive.com
State New
Delegated to: Ambarus Tudor
Headers show
Series update is25wp256d page write capabilities | expand

Commit Message

Sagar Shrikant Kadam May 14, 2020, 11:50 a.m. UTC
During SFDP parsing it is seen that the IS25WP256d device is missing 4BAIT
(4-Byte address instruction table), due to which it's page program
capacity doesn't get correctly populated and the device gets configured
with 4-byte Address Serial Input Page Program i.e. SNOR_PROTO_1_1_1
even though it can work with SNOR_PROTO_1_1_4.

Here using the post bfpt fixup hooks we update the page program
settings to 4-byte QUAD Input Page program operations.

The patch is tested on HiFive Unleashed A00 board and it benefits
few seconds of average write time for entire flash write.

QUAD Input Page Program operations:
> time mtd_debug write /dev/mtd0 0 33554432 rd32M
Copied 33554432 bytes from rd32M to address 0x00000000 in flash
real    0m 32.85s
user    0m 0.00s
sys     0m 31.79s

Serial Input Page Program operations:
> time mtd_debug write /dev/mtd0 0 33554432 rd32M
Copied 33554432 bytes from rd32M to address 0x00000000 in flash
real    0m 35.87s
user    0m 0.00s
sys     0m 35.42s

Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com>
---
 drivers/mtd/spi-nor/issi.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

Comments

Pratyush Yadav May 15, 2020, 7:04 a.m. UTC | #1
Hi Sagar,

On 14/05/20 04:50AM, Sagar Shrikant Kadam wrote:
> During SFDP parsing it is seen that the IS25WP256d device is missing 4BAIT
> (4-Byte address instruction table), due to which it's page program
> capacity doesn't get correctly populated and the device gets configured
> with 4-byte Address Serial Input Page Program i.e. SNOR_PROTO_1_1_1
> even though it can work with SNOR_PROTO_1_1_4.
> 
> Here using the post bfpt fixup hooks we update the page program
> settings to 4-byte QUAD Input Page program operations.
> 
> The patch is tested on HiFive Unleashed A00 board and it benefits
> few seconds of average write time for entire flash write.
> 
> QUAD Input Page Program operations:
> > time mtd_debug write /dev/mtd0 0 33554432 rd32M
> Copied 33554432 bytes from rd32M to address 0x00000000 in flash
> real    0m 32.85s
> user    0m 0.00s
> sys     0m 31.79s
> 
> Serial Input Page Program operations:
> > time mtd_debug write /dev/mtd0 0 33554432 rd32M
> Copied 33554432 bytes from rd32M to address 0x00000000 in flash
> real    0m 35.87s
> user    0m 0.00s
> sys     0m 35.42s
> 
> Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com>
> ---
>  drivers/mtd/spi-nor/issi.c | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/drivers/mtd/spi-nor/issi.c b/drivers/mtd/spi-nor/issi.c
> index ffcb60e..9eb6e82 100644
> --- a/drivers/mtd/spi-nor/issi.c
> +++ b/drivers/mtd/spi-nor/issi.c
> @@ -23,6 +23,22 @@ is25lp256_post_bfpt_fixups(struct spi_nor *nor,
>  		BFPT_DWORD1_ADDRESS_BYTES_3_ONLY)
>  		nor->addr_width = 4;
>  
> +	/*
> +	 * On IS25WP256d device 4-Byte address instruction table doesn't
> +	 * get populated and so the device get's configured with 4-byte
> +	 * Address Serial Input Page Program i.e. SNOR_PROTO_1_1_1 even
> +	 * though it supports SNOR_PROTO_1_1_4, so priorotize QUAD write
> +	 * over SINGLE write if device id table holds SPI_NOR_QUAD_READ.
> +	 */
> +	if (strcmp(nor->info->name, "is25wp256") == 0) {

Instead of doing this, wouldn't it make more sense to have a separate 
fixup hook for is25wp256? Does this device also need the above address 
width fixup? If it does, maybe that can be split into a separate 
function, and used by both the fixups?

> +		if (nor->info->flags & SPI_NOR_QUAD_READ) {
> +			params->hwcaps.mask |= SNOR_HWCAPS_PP_1_1_4;
> +			spi_nor_set_pp_settings
> +				(&params->page_programs[SNOR_CMD_PP_1_1_4],
> +				 SPINOR_OP_PP_1_1_4,
> +				 SNOR_PROTO_1_1_4);
> +		}
> +	}
>  	return 0;
>  }
Sagar Shrikant Kadam May 15, 2020, 8:41 a.m. UTC | #2
Hi Pratyush,

> -----Original Message-----
> From: Pratyush Yadav <me@yadavpratyush.com>
> Sent: Friday, May 15, 2020 12:35 PM
> To: Sagar Kadam <sagar.kadam@sifive.com>
> Cc: linux-riscv@lists.infradead.org; linux-kernel@vger.kernel.org; linux-
> mtd@lists.infradead.org; tudor.ambarus@microchip.com;
> miquel.raynal@bootlin.com; richard@nod.at; vigneshr@ti.com;
> anup.patel@wdc.com; aou@eecs.berkeley.edu; palmer@dabbelt.com; Paul
> Walmsley <paul.walmsley@sifive.com>
> Subject: Re: [PATCH v1 2/2] spi: nor: update page program settings for
> is25wp256 using post bfpt fixup
> 
> [External Email] Do not click links or attachments unless you recognize the
> sender and know the content is safe
> 
> Hi Sagar,
> 
> On 14/05/20 04:50AM, Sagar Shrikant Kadam wrote:
> > During SFDP parsing it is seen that the IS25WP256d device is missing 4BAIT
> > (4-Byte address instruction table), due to which it's page program
> > capacity doesn't get correctly populated and the device gets configured
> > with 4-byte Address Serial Input Page Program i.e. SNOR_PROTO_1_1_1
> > even though it can work with SNOR_PROTO_1_1_4.
> >
> > Here using the post bfpt fixup hooks we update the page program
> > settings to 4-byte QUAD Input Page program operations.
> >
> > The patch is tested on HiFive Unleashed A00 board and it benefits
> > few seconds of average write time for entire flash write.
> >
> > QUAD Input Page Program operations:
> > > time mtd_debug write /dev/mtd0 0 33554432 rd32M
> > Copied 33554432 bytes from rd32M to address 0x00000000 in flash
> > real    0m 32.85s
> > user    0m 0.00s
> > sys     0m 31.79s
> >
> > Serial Input Page Program operations:
> > > time mtd_debug write /dev/mtd0 0 33554432 rd32M
> > Copied 33554432 bytes from rd32M to address 0x00000000 in flash
> > real    0m 35.87s
> > user    0m 0.00s
> > sys     0m 35.42s
> >
> > Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com>
> > ---
> >  drivers/mtd/spi-nor/issi.c | 16 ++++++++++++++++
> >  1 file changed, 16 insertions(+)
> >
> > diff --git a/drivers/mtd/spi-nor/issi.c b/drivers/mtd/spi-nor/issi.c
> > index ffcb60e..9eb6e82 100644
> > --- a/drivers/mtd/spi-nor/issi.c
> > +++ b/drivers/mtd/spi-nor/issi.c
> > @@ -23,6 +23,22 @@ is25lp256_post_bfpt_fixups(struct spi_nor *nor,
> >               BFPT_DWORD1_ADDRESS_BYTES_3_ONLY)
> >               nor->addr_width = 4;
> >
> > +     /*
> > +      * On IS25WP256d device 4-Byte address instruction table doesn't
> > +      * get populated and so the device get's configured with 4-byte
> > +      * Address Serial Input Page Program i.e. SNOR_PROTO_1_1_1 even
> > +      * though it supports SNOR_PROTO_1_1_4, so priorotize QUAD write
> > +      * over SINGLE write if device id table holds SPI_NOR_QUAD_READ.
> > +      */
> > +     if (strcmp(nor->info->name, "is25wp256") == 0) {
> 
> Instead of doing this, wouldn't it make more sense to have a separate
> fixup hook for is25wp256? Does this device also need the above address
> width fixup? If it does, maybe that can be split into a separate
> function, and used by both the fixups?
> 
Thanks for suggestion. Yes this device requires the above address width fixup.
I suspect that this QUAD mode fix might also be required for "is25lp256" device.
But since I don't have it on my board, I couldn't validate it. If someone could give it a try
on "is25lp256" device and confirm this, then I guess we can remove this check from 
here "if (strcmp(nor->info->name, "is25wp256") == 0)" and rename the is25lp256_post_bfpt_fixups
to is25lpwp256_post_bfpt_fixups to use command fixup for both flash devices,
else I am also ok to split it into separate function as suggested that can be used by both fixup's

Thanks & BR,
Sagar Kadam

> > +             if (nor->info->flags & SPI_NOR_QUAD_READ) {
> > +                     params->hwcaps.mask |= SNOR_HWCAPS_PP_1_1_4;
> > +                     spi_nor_set_pp_settings
> > +                             (&params->page_programs[SNOR_CMD_PP_1_1_4],
> > +                              SPINOR_OP_PP_1_1_4,
> > +                              SNOR_PROTO_1_1_4);
> > +             }
> > +     }
> >       return 0;
> >  }
> 
> --
> Regards,
> Pratyush Yadav
diff mbox series

Patch

diff --git a/drivers/mtd/spi-nor/issi.c b/drivers/mtd/spi-nor/issi.c
index ffcb60e..9eb6e82 100644
--- a/drivers/mtd/spi-nor/issi.c
+++ b/drivers/mtd/spi-nor/issi.c
@@ -23,6 +23,22 @@  is25lp256_post_bfpt_fixups(struct spi_nor *nor,
 		BFPT_DWORD1_ADDRESS_BYTES_3_ONLY)
 		nor->addr_width = 4;
 
+	/*
+	 * On IS25WP256d device 4-Byte address instruction table doesn't
+	 * get populated and so the device get's configured with 4-byte
+	 * Address Serial Input Page Program i.e. SNOR_PROTO_1_1_1 even
+	 * though it supports SNOR_PROTO_1_1_4, so priorotize QUAD write
+	 * over SINGLE write if device id table holds SPI_NOR_QUAD_READ.
+	 */
+	if (strcmp(nor->info->name, "is25wp256") == 0) {
+		if (nor->info->flags & SPI_NOR_QUAD_READ) {
+			params->hwcaps.mask |= SNOR_HWCAPS_PP_1_1_4;
+			spi_nor_set_pp_settings
+				(&params->page_programs[SNOR_CMD_PP_1_1_4],
+				 SPINOR_OP_PP_1_1_4,
+				 SNOR_PROTO_1_1_4);
+		}
+	}
 	return 0;
 }