diff mbox series

[RFC,3/3] spi: HiSilicon v3xx: Use DMI quirk to set controller buswidth override bits

Message ID 1582903131-160033-4-git-send-email-john.garry@huawei.com
State RFC
Delegated to: Ambarus Tudor
Headers show
Series spi/HiSilicon v3xx: Support dual and quad mode through DMI quirks | expand

Commit Message

John Garry Feb. 28, 2020, 3:18 p.m. UTC 
The Huawei D06 board (and variants) can support Quad mode of operation.

Since we have no current method in ACPI SPI bus device resource description
to describe this information, use DMI to detect the board, and set the
controller buswidth override bits.

Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/spi/spi-hisi-sfc-v3xx.c | 56 ++++++++++++++++++++++++++++++++-
 1 file changed, 55 insertions(+), 1 deletion(-)

Comments

Mark Brown Feb. 28, 2020, 4:20 p.m. UTC | #1 
On Fri, Feb 28, 2020 at 11:18:51PM +0800, John Garry wrote:
> The Huawei D06 board (and variants) can support Quad mode of operation.
> 
> Since we have no current method in ACPI SPI bus device resource description
> to describe this information, use DMI to detect the board, and set the
> controller buswidth override bits.

Hopefully this is something that the ACPI people will be looking to
address going forwards :/
John Garry Feb. 28, 2020, 5:17 p.m. UTC | #2 
On 28/02/2020 16:20, Mark Brown wrote:
> On Fri, Feb 28, 2020 at 11:18:51PM +0800, John Garry wrote:
>> The Huawei D06 board (and variants) can support Quad mode of operation.
>>
>> Since we have no current method in ACPI SPI bus device resource description
>> to describe this information, use DMI to detect the board, and set the
>> controller buswidth override bits.
> 
> Hopefully this is something that the ACPI people will be looking to
> address going forwards :/
> 

Yeah, well I did mention the bugzilla [0] I raised for this in the cover 
letter; but I think that the new process workflows to raise feature 
requests in this way still needs to be formalized, so this may be 
blocked for now [1].

And unfortunately I can't actively participate in relevant standards WGs 
either, so if anyone else would like to assist, then that would great...

BTW, I think that it might also be good to request a generic 
jedec-compatible SPI NOR part ACPI HID/CID here also.

Thanks,
John

[0] https://bugzilla.tianocore.org/show_bug.cgi?id=2557
[1] https://edk2.groups.io/g/devel/message/53420

> 
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/
>
diff mbox series

Patch

diff --git a/drivers/spi/spi-hisi-sfc-v3xx.c b/drivers/spi/spi-hisi-sfc-v3xx.c
index 45d906110ed1..e3b57252d075 100644
--- a/drivers/spi/spi-hisi-sfc-v3xx.c
+++ b/drivers/spi/spi-hisi-sfc-v3xx.c
@@ -7,6 +7,7 @@ 
 
 #include <linux/acpi.h>
 #include <linux/bitops.h>
+#include <linux/dmi.h>
 #include <linux/iopoll.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
@@ -250,6 +251,44 @@  static const struct spi_controller_mem_ops hisi_sfc_v3xx_mem_ops = {
 	.exec_op = hisi_sfc_v3xx_exec_op,
 };
 
+static int hisi_sfc_v3xx_buswidth_override_bits;
+
+/*
+ * ACPI FW does not allow us to currently set the device buswidth, so quirk it
+ * depending on the board.
+ */
+static int __init hisi_sfc_v3xx_dmi_quirk(const struct dmi_system_id *d)
+{
+	hisi_sfc_v3xx_buswidth_override_bits = SPI_RX_QUAD | SPI_TX_QUAD;
+
+	return 0;
+}
+
+static const struct dmi_system_id hisi_sfc_v3xx_dmi_quirk_table[]  = {
+	{
+	.callback = hisi_sfc_v3xx_dmi_quirk,
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Huawei"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "D06"),
+	},
+	},
+	{
+	.callback = hisi_sfc_v3xx_dmi_quirk,
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Huawei"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "TaiShan 2280 V2"),
+	},
+	},
+	{
+	.callback = hisi_sfc_v3xx_dmi_quirk,
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Huawei"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "TaiShan 200 (Model 2280)"),
+	},
+	},
+	{}
+};
+
 static int hisi_sfc_v3xx_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -265,6 +304,8 @@  static int hisi_sfc_v3xx_probe(struct platform_device *pdev)
 	ctlr->mode_bits = SPI_RX_DUAL | SPI_RX_QUAD |
 			  SPI_TX_DUAL | SPI_TX_QUAD;
 
+	ctlr->buswidth_override_bits = hisi_sfc_v3xx_buswidth_override_bits;
+
 	host = spi_controller_get_devdata(ctlr);
 	host->dev = dev;
 
@@ -320,7 +361,20 @@  static struct platform_driver hisi_sfc_v3xx_spi_driver = {
 	.probe	= hisi_sfc_v3xx_probe,
 };
 
-module_platform_driver(hisi_sfc_v3xx_spi_driver);
+static int __init hisi_sfc_v3xx_spi_init(void)
+{
+	dmi_check_system(hisi_sfc_v3xx_dmi_quirk_table);
+
+	return platform_driver_register(&hisi_sfc_v3xx_spi_driver);
+}
+
+static void __exit hisi_sfc_v3xx_spi_exit(void)
+{
+	platform_driver_unregister(&hisi_sfc_v3xx_spi_driver);
+}
+
+module_init(hisi_sfc_v3xx_spi_init);
+module_exit(hisi_sfc_v3xx_spi_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("John Garry <john.garry@huawei.com>");