diff mbox series

[v2] drivers: mtd: spi-nor: Add flash property for mt25qu512a and mt35xu02g

Message ID 1561631283-30937-1-git-send-email-Ashish.Kumar@nxp.com
State Superseded
Delegated to: Ambarus Tudor
Headers show
Series [v2] drivers: mtd: spi-nor: Add flash property for mt25qu512a and mt35xu02g | expand

Commit Message

Ashish Kumar June 27, 2019, 10:28 a.m. UTC 
From: Ashish Kumar <ashish.kumar@nxp.com>

mt25qu512a is rebranded after its spinoff from STM, so it is
different only in term of extended jedec ID, initial JEDEC id
is same as that of n25q512a.In order to avoid any confussion 
with respect to name new entry is added.
This flash is tested for Single I/O mode on LS1046FRWY although
it does support QUAD I/O.

mt35xu02g is Octal flash supporting Single I/O and QCTAL I/O
and has been tested on LS1028ARDB

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Signed-off-by: Ashish Kumar <ashish.kumar@nxp.com>
---
V2:
Re-work based on review comments from Vignesh R

 drivers/mtd/spi-nor/spi-nor.c | 2 ++
 1 file changed, 2 insertions(+)
diff mbox series

Patch

diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index 73172d7..34e33a7 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -1880,6 +1880,7 @@  static const struct flash_info spi_nor_ids[] = {
 	{ "n25q512ax3",  INFO(0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
 	{ "n25q00",      INFO(0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
 	{ "n25q00a",     INFO(0x20bb21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
+	{ "mt25qu512a", INFO6(0x20bb20, 0x104400, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_4B_OPCODES) },
 	{ "mt25qu02g",   INFO(0x20bb22, 0, 64 * 1024, 4096, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
 
 	/* Micron */
@@ -1888,6 +1889,7 @@  static const struct flash_info spi_nor_ids[] = {
 			SECT_4K | USE_FSR | SPI_NOR_OCTAL_READ |
 			SPI_NOR_4B_OPCODES)
 	},
+	{ "mt35xu02g",   INFO(0x2c5b1c, 0, 128 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_OCTAL_READ | SPI_NOR_4B_OPCODES) },
 
 	/* PMC */
 	{ "pm25lv512",   INFO(0,        0, 32 * 1024,    2, SECT_4K_PMC) },