From patchwork Thu Jun 4 16:54:02 2015 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Joachim Eastwood X-Patchwork-Id: 480844 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Received: from bombadil.infradead.org (bombadil.infradead.org [IPv6:2001:1868:205::9]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by ozlabs.org (Postfix) with ESMTPS id 02EB0140218 for ; Fri, 5 Jun 2015 02:57:41 +1000 (AEST) Authentication-Results: ozlabs.org; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=gmail.com header.i=@gmail.com header.b=zI07z4cN; dkim-atps=neutral Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1Z0YQI-0002Jo-1Y; Thu, 04 Jun 2015 16:55:18 +0000 Received: from mail-lb0-x232.google.com ([2a00:1450:4010:c04::232]) by bombadil.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1Z0YPg-0000l0-7D; Thu, 04 Jun 2015 16:54:44 +0000 Received: by lbbtu8 with SMTP id tu8so15045117lbb.2; Thu, 04 Jun 2015 09:54:17 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=pZ0qDwtkosKuc6rVlLlocgaTkZi3trd5DRfAlw8vgkI=; b=zI07z4cNtTtmmeqq4CcsAckbBBlPOxvxVz1MKK1eCNIYmtJgGMM3i9GDxyl8oNEsZ/ 6N3BgsBICr0rFqQXCR04kUU0Ix+K6z8MvsrAJeuBYKqE09zAir9zmip+Nuk9pO/qV6J1 pvxPj2CGQI43nUMeXYs9UqaGmtCmZO7v1vw/QGVSWcw1LKKzLV+nSvMKpYVxvigxu1yt P6Zrs4m+KO+Ns9E/h2oHUL+hnXMzBEoT9BBv7qWnCbdzhzojeQoE7ogkBAGf6AETHi/K qM2POCuxmBEd9j4rQsADKaJ8k8JYznbVrs+ZWBnjS95Wk+qT3433z82KxH1nDfg3YB/x Jh4g== X-Received: by 10.112.72.104 with SMTP id c8mr36914756lbv.77.1433436857440; Thu, 04 Jun 2015 09:54:17 -0700 (PDT) Received: from localhost.localdomain ([89.11.213.141]) by mx.google.com with ESMTPSA id ci10sm900320lad.35.2015.06.04.09.54.16 (version=TLSv1.1 cipher=ECDHE-RSA-RC4-SHA bits=128/128); Thu, 04 Jun 2015 09:54:16 -0700 (PDT) From: Joachim Eastwood To: computersforpeace@gmail.com, dwmw2@infradead.org, ezequiel@vanguardiasur.com.ar Subject: [PATCH v3 1/2] mtd: spi-nor: add driver for NXP SPI Flash Interface (SPIFI) Date: Thu, 4 Jun 2015 18:54:02 +0200 Message-Id: <1433436843-22296-2-git-send-email-manabian@gmail.com> X-Mailer: git-send-email 1.8.0 In-Reply-To: <1433436843-22296-1-git-send-email-manabian@gmail.com> References: <1433436843-22296-1-git-send-email-manabian@gmail.com> X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20150604_095440_757407_B17A0649 X-CRM114-Status: GOOD ( 22.51 ) X-Spam-Score: -0.8 (/) X-Spam-Report: SpamAssassin version 3.4.0 on bombadil.infradead.org summary: Content analysis details: (-0.8 points) pts rule name description ---- ---------------------- -------------------------------------------------- -0.7 RCVD_IN_DNSWL_LOW RBL: Sender listed at http://www.dnswl.org/, low trust [2a00:1450:4010:c04:0:0:0:232 listed in] [list.dnswl.org] -0.0 SPF_PASS SPF: sender matches SPF record 0.0 FREEMAIL_FROM Sender email is commonly abused enduser mail provider (manabian[at]gmail.com) -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature Cc: shijie.huang@intel.com, devicetree@vger.kernel.org, Joachim Eastwood , linux-mtd@lists.infradead.org, linux-arm-kernel@lists.infradead.org X-BeenThere: linux-mtd@lists.infradead.org X-Mailman-Version: 2.1.18-1 Precedence: list List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Sender: "linux-mtd" Errors-To: linux-mtd-bounces+incoming=patchwork.ozlabs.org@lists.infradead.org Add SPI-NOR driver for the SPI Flash Interface (SPIFI) controller that is found newer NXP MCU devices. The controller supports serial SPI Flash devices with 1-, 2- and 4-bit width in either SPI mode 0 or 3. The controller can operate in either command or memory mode. In memory mode the Flash is exposed as normal memory and can be directly accessed by the CPU. Signed-off-by: Joachim Eastwood Reviewed-by: Ezequiel Garcia Reviewed-by: Brian Norris --- drivers/mtd/spi-nor/Kconfig | 11 + drivers/mtd/spi-nor/Makefile | 1 + drivers/mtd/spi-nor/nxp-spifi.c | 496 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 508 insertions(+) create mode 100644 drivers/mtd/spi-nor/nxp-spifi.c diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig index 64a4f0edabc7..407142e411fa 100644 --- a/drivers/mtd/spi-nor/Kconfig +++ b/drivers/mtd/spi-nor/Kconfig @@ -28,4 +28,15 @@ config SPI_FSL_QUADSPI This enables support for the Quad SPI controller in master mode. We only connect the NOR to this controller now. +config SPI_NXP_SPIFI + tristate "NXP SPI Flash Interface (SPIFI)" + depends on OF && (ARCH_LPC18XX || COMPILE_TEST) + depends on HAS_IOMEM + help + Enable support for the NXP LPC SPI Flash Interface controller. + + SPIFI is a specialized controller for connecting serial SPI + Flash. Enable this option if you have a device with a SPIFI + controller and want to access the Flash as a mtd device. + endif # MTD_SPI_NOR diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile index 6a7ce1462247..e53333ef8582 100644 --- a/drivers/mtd/spi-nor/Makefile +++ b/drivers/mtd/spi-nor/Makefile @@ -1,2 +1,3 @@ obj-$(CONFIG_MTD_SPI_NOR) += spi-nor.o obj-$(CONFIG_SPI_FSL_QUADSPI) += fsl-quadspi.o +obj-$(CONFIG_SPI_NXP_SPIFI) += nxp-spifi.o diff --git a/drivers/mtd/spi-nor/nxp-spifi.c b/drivers/mtd/spi-nor/nxp-spifi.c new file mode 100644 index 000000000000..8721f686ac9e --- /dev/null +++ b/drivers/mtd/spi-nor/nxp-spifi.c @@ -0,0 +1,496 @@ +/* + * SPI-NOR driver for NXP SPI Flash Interface (SPIFI) + * + * Copyright (C) 2015 Joachim Eastwood + * + * Based on Freescale QuadSPI driver: + * Copyright (C) 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* NXP SPIFI registers, bits and macros */ +#define SPIFI_CTRL 0x000 +#define SPIFI_CTRL_TIMEOUT(timeout) (timeout) +#define SPIFI_CTRL_CSHIGH(cshigh) ((cshigh) << 16) +#define SPIFI_CTRL_MODE3 BIT(23) +#define SPIFI_CTRL_DUAL BIT(28) +#define SPIFI_CTRL_FBCLK BIT(30) +#define SPIFI_CMD 0x004 +#define SPIFI_CMD_DATALEN(dlen) (dlen & 0x3fff) +#define SPIFI_CMD_DOUT BIT(15) +#define SPIFI_CMD_INTLEN(ilen) ((ilen) << 16) +#define SPIFI_CMD_FIELDFORM(field) ((field) << 19) +#define SPIFI_CMD_FIELDFORM_ALL_SERIAL SPIFI_CMD_FIELDFORM(0x0) +#define SPIFI_CMD_FIELDFORM_QUAD_DUAL_DATA SPIFI_CMD_FIELDFORM(0x1) +#define SPIFI_CMD_FRAMEFORM(frame) ((frame) << 21) +#define SPIFI_CMD_FRAMEFORM_OPCODE_ONLY SPIFI_CMD_FRAMEFORM(0x1) +#define SPIFI_CMD_OPCODE(op) ((op) << 24) +#define SPIFI_ADDR 0x008 +#define SPIFI_IDATA 0x00c +#define SPIFI_CLIMIT 0x010 +#define SPIFI_DATA 0x014 +#define SPIFI_MCMD 0x018 +#define SPIFI_STAT 0x01c +#define SPIFI_STAT_MCINIT BIT(0) +#define SPIFI_STAT_CMD BIT(1) +#define SPIFI_STAT_RESET BIT(4) + +#define SPI_NOR_MAX_ID_LEN 6 + +struct nxp_spifi { + struct device *dev; + struct clk *clk_spifi; + struct clk *clk_reg; + void __iomem *io_base; + void __iomem *flash_base; + struct mtd_info mtd; + struct spi_nor nor; + bool memory_mode; + u32 mcmd; +}; + +static int nxp_spifi_wait_for_cmd(struct nxp_spifi *spifi) +{ + u8 stat; + int ret; + + ret = readb_poll_timeout(spifi->io_base + SPIFI_STAT, stat, + !(stat & SPIFI_STAT_CMD), 10, 30); + if (ret) + dev_warn(spifi->dev, "command timed out\n"); + + return ret; +} + +static int nxp_spifi_reset(struct nxp_spifi *spifi) +{ + u8 stat; + int ret; + + writel(SPIFI_STAT_RESET, spifi->io_base + SPIFI_STAT); + ret = readb_poll_timeout(spifi->io_base + SPIFI_STAT, stat, + !(stat & SPIFI_STAT_RESET), 10, 30); + if (ret) + dev_warn(spifi->dev, "state reset timed out\n"); + + return ret; +} + +static int nxp_spifi_set_memory_mode_off(struct nxp_spifi *spifi) +{ + int ret; + + if (!spifi->memory_mode) + return 0; + + ret = nxp_spifi_reset(spifi); + if (ret) + dev_err(spifi->dev, "unable to enter command mode\n"); + else + spifi->memory_mode = false; + + return ret; +} + +static int nxp_spifi_set_memory_mode_on(struct nxp_spifi *spifi) +{ + u8 stat; + int ret; + + if (spifi->memory_mode) + return 0; + + writel(spifi->mcmd, spifi->io_base + SPIFI_MCMD); + ret = readb_poll_timeout(spifi->io_base + SPIFI_STAT, stat, + stat & SPIFI_STAT_MCINIT, 10, 30); + if (ret) + dev_err(spifi->dev, "unable to enter memory mode\n"); + else + spifi->memory_mode = true; + + return ret; +} + +static int nxp_spifi_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len) +{ + struct nxp_spifi *spifi = nor->priv; + u32 cmd; + int ret; + + ret = nxp_spifi_set_memory_mode_off(spifi); + if (ret) + return ret; + + cmd = SPIFI_CMD_DATALEN(len) | + SPIFI_CMD_OPCODE(opcode) | + SPIFI_CMD_FIELDFORM_ALL_SERIAL | + SPIFI_CMD_FRAMEFORM_OPCODE_ONLY; + writel(cmd, spifi->io_base + SPIFI_CMD); + + while (len--) + *buf++ = readb(spifi->io_base + SPIFI_DATA); + + return nxp_spifi_wait_for_cmd(spifi); +} + +static int nxp_spifi_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, + int len, int write_enable) +{ + struct nxp_spifi *spifi = nor->priv; + u32 cmd; + int ret; + + ret = nxp_spifi_set_memory_mode_off(spifi); + if (ret) + return ret; + + cmd = SPIFI_CMD_DOUT | + SPIFI_CMD_DATALEN(len) | + SPIFI_CMD_OPCODE(opcode) | + SPIFI_CMD_FIELDFORM_ALL_SERIAL | + SPIFI_CMD_FRAMEFORM_OPCODE_ONLY; + writel(cmd, spifi->io_base + SPIFI_CMD); + + while (len--) + writeb(*buf++, spifi->io_base + SPIFI_DATA); + + return nxp_spifi_wait_for_cmd(spifi); +} + +static int nxp_spifi_read(struct spi_nor *nor, loff_t from, size_t len, + size_t *retlen, u_char *buf) +{ + struct nxp_spifi *spifi = nor->priv; + int ret; + + ret = nxp_spifi_set_memory_mode_on(spifi); + if (ret) + return ret; + + memcpy_fromio(buf, spifi->flash_base + from, len); + *retlen += len; + + return 0; +} + +static void nxp_spifi_write(struct spi_nor *nor, loff_t to, size_t len, + size_t *retlen, const u_char *buf) +{ + struct nxp_spifi *spifi = nor->priv; + u32 cmd; + int ret; + + ret = nxp_spifi_set_memory_mode_off(spifi); + if (ret) { + *retlen = 0; + return; + } + + writel(to, spifi->io_base + SPIFI_ADDR); + *retlen = len; + + cmd = SPIFI_CMD_DOUT | + SPIFI_CMD_DATALEN(len) | + SPIFI_CMD_FIELDFORM_ALL_SERIAL | + SPIFI_CMD_OPCODE(nor->program_opcode) | + SPIFI_CMD_FRAMEFORM(spifi->nor.addr_width + 1); + writel(cmd, spifi->io_base + SPIFI_CMD); + + while (len--) + writeb(*buf++, spifi->io_base + SPIFI_DATA); + + nxp_spifi_wait_for_cmd(spifi); +} + +static int nxp_spifi_erase(struct spi_nor *nor, loff_t offs) +{ + struct nxp_spifi *spifi = nor->priv; + u32 cmd; + int ret; + + ret = nxp_spifi_set_memory_mode_off(spifi); + if (ret) + return ret; + + writel(offs, spifi->io_base + SPIFI_ADDR); + + cmd = SPIFI_CMD_FIELDFORM_ALL_SERIAL | + SPIFI_CMD_OPCODE(nor->erase_opcode) | + SPIFI_CMD_FRAMEFORM(spifi->nor.addr_width + 1); + writel(cmd, spifi->io_base + SPIFI_CMD); + + return nxp_spifi_wait_for_cmd(spifi); +} + +static int nxp_spifi_setup_memory_cmd(struct nxp_spifi *spifi) +{ + switch (spifi->nor.flash_read) { + case SPI_NOR_NORMAL: + case SPI_NOR_FAST: + spifi->mcmd = SPIFI_CMD_FIELDFORM_ALL_SERIAL; + break; + case SPI_NOR_DUAL: + case SPI_NOR_QUAD: + spifi->mcmd = SPIFI_CMD_FIELDFORM_QUAD_DUAL_DATA; + break; + default: + dev_err(spifi->dev, "unsupported spi read mode\n"); + return -EINVAL; + } + + /* Memory mode supports address length between 1 and 4 */ + if (spifi->nor.addr_width < 1 || spifi->nor.addr_width > 4) + return -EINVAL; + + spifi->mcmd |= SPIFI_CMD_OPCODE(spifi->nor.read_opcode) | + SPIFI_CMD_INTLEN(spifi->nor.read_dummy / 8) | + SPIFI_CMD_FRAMEFORM(spifi->nor.addr_width + 1); + + return 0; +} + +static void nxp_spifi_dummy_id_read(struct spi_nor *nor) +{ + u8 id[SPI_NOR_MAX_ID_LEN]; + nor->read_reg(nor, SPINOR_OP_RDID, id, SPI_NOR_MAX_ID_LEN); +} + +static int nxp_spifi_setup_flash(struct nxp_spifi *spifi, + struct device_node *np) +{ + struct mtd_part_parser_data ppdata; + enum read_mode flash_read; + char *flash_name = NULL; + u32 ctrl, property; + char modalias[40]; + u16 mode = 0; + int ret; + + if (!of_property_read_u32(np, "spi-rx-bus-width", &property)) { + switch (property) { + case 1: + break; + case 2: + mode |= SPI_RX_DUAL; + break; + case 4: + mode |= SPI_RX_QUAD; + break; + default: + dev_err(spifi->dev, "unsupported rx-bus-width\n"); + return -EINVAL; + } + } + + if (of_find_property(np, "spi-cpha", NULL)) + mode |= SPI_CPHA; + + if (of_find_property(np, "spi-cpol", NULL)) + mode |= SPI_CPOL; + + /* Setup control register defaults */ + ctrl = SPIFI_CTRL_TIMEOUT(1000) | + SPIFI_CTRL_CSHIGH(15) | + SPIFI_CTRL_FBCLK; + + if (mode & SPI_RX_DUAL) { + ctrl |= SPIFI_CTRL_DUAL; + flash_read = SPI_NOR_DUAL; + } else if (mode & SPI_RX_QUAD) { + ctrl &= ~SPIFI_CTRL_DUAL; + flash_read = SPI_NOR_QUAD; + } else { + ctrl |= SPIFI_CTRL_DUAL; + flash_read = SPI_NOR_NORMAL; + } + + switch (mode & (SPI_CPHA | SPI_CPOL)) { + case SPI_MODE_0: + ctrl &= ~SPIFI_CTRL_MODE3; + break; + case SPI_MODE_3: + ctrl |= SPIFI_CTRL_MODE3; + break; + default: + dev_err(spifi->dev, "only mode 0 and 3 supported\n"); + return -EINVAL; + } + + writel(ctrl, spifi->io_base + SPIFI_CTRL); + + spifi->mtd.priv = &spifi->nor; + spifi->nor.mtd = &spifi->mtd; + spifi->nor.dev = spifi->dev; + spifi->nor.priv = spifi; + spifi->nor.read = nxp_spifi_read; + spifi->nor.write = nxp_spifi_write; + spifi->nor.erase = nxp_spifi_erase; + spifi->nor.read_reg = nxp_spifi_read_reg; + spifi->nor.write_reg = nxp_spifi_write_reg; + + ret = of_modalias_node(np, modalias, sizeof(modalias)); + if (ret < 0) { + dev_err(spifi->dev, "unable to get device modalias\n"); + return ret; + } + + /* Use auto detect unless chip is specified */ + if (strcmp(modalias, "spi-nor")) + flash_name = modalias; + + /* + * The first read on a hard reset isn't reliable so do a + * dummy read of the id before calling spi_nor_scan(). + * The reason for this problem is unknown. + * + * The official NXP spifilib uses more or less the same + * workaround that is applied here by reading the device + * id multiple times. + */ + nxp_spifi_dummy_id_read(&spifi->nor); + + ret = spi_nor_scan(&spifi->nor, flash_name, flash_read); + if (ret) { + dev_err(spifi->dev, "device scan failed\n"); + return ret; + } + + ret = nxp_spifi_setup_memory_cmd(spifi); + if (ret) { + dev_err(spifi->dev, "memory command setup failed\n"); + return ret; + } + + ppdata.of_node = np; + ret = mtd_device_parse_register(&spifi->mtd, NULL, &ppdata, NULL, 0); + if (ret) { + dev_err(spifi->dev, "mtd device parse failed\n"); + return ret; + } + + return 0; +} + +static int nxp_spifi_probe(struct platform_device *pdev) +{ + struct device_node *flash_np; + struct nxp_spifi *spifi; + struct resource *res; + int ret; + + spifi = devm_kzalloc(&pdev->dev, sizeof(*spifi), GFP_KERNEL); + if (!spifi) + return -ENOMEM; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "spifi"); + spifi->io_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(spifi->io_base)) + return PTR_ERR(spifi->io_base); + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "flash"); + spifi->flash_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(spifi->flash_base)) + return PTR_ERR(spifi->flash_base); + + spifi->clk_spifi = devm_clk_get(&pdev->dev, "spifi"); + if (IS_ERR(spifi->clk_spifi)) { + dev_err(&pdev->dev, "spifi clock not found\n"); + return PTR_ERR(spifi->clk_spifi); + } + + spifi->clk_reg = devm_clk_get(&pdev->dev, "reg"); + if (IS_ERR(spifi->clk_reg)) { + dev_err(&pdev->dev, "reg clock not found\n"); + return PTR_ERR(spifi->clk_reg); + } + + ret = clk_prepare_enable(spifi->clk_reg); + if (ret) { + dev_err(&pdev->dev, "unable to enable reg clock\n"); + return ret; + } + + ret = clk_prepare_enable(spifi->clk_spifi); + if (ret) { + dev_err(&pdev->dev, "unable to enable spifi clock\n"); + goto dis_clk_reg; + } + + spifi->dev = &pdev->dev; + platform_set_drvdata(pdev, spifi); + + /* Initialize and reset device */ + nxp_spifi_reset(spifi); + writel(0, spifi->io_base + SPIFI_IDATA); + writel(0, spifi->io_base + SPIFI_MCMD); + nxp_spifi_reset(spifi); + + flash_np = of_get_next_available_child(pdev->dev.of_node, NULL); + if (!flash_np) { + dev_err(&pdev->dev, "no spi flash device to configure\n"); + ret = -ENODEV; + goto dis_clks; + } + + ret = nxp_spifi_setup_flash(spifi, flash_np); + if (ret) { + dev_err(&pdev->dev, "unable to setup flash chip\n"); + goto dis_clks; + } + + return 0; + +dis_clks: + clk_disable_unprepare(spifi->clk_spifi); +dis_clk_reg: + clk_disable_unprepare(spifi->clk_reg); + return ret; +} + +static int nxp_spifi_remove(struct platform_device *pdev) +{ + struct nxp_spifi *spifi = platform_get_drvdata(pdev); + + mtd_device_unregister(&spifi->mtd); + clk_disable_unprepare(spifi->clk_spifi); + clk_disable_unprepare(spifi->clk_reg); + + return 0; +} + +static const struct of_device_id nxp_spifi_match[] = { + {.compatible = "nxp,lpc1773-spifi"}, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, nxp_spifi_match); + +static struct platform_driver nxp_spifi_driver = { + .probe = nxp_spifi_probe, + .remove = nxp_spifi_remove, + .driver = { + .name = "nxp-spifi", + .of_match_table = nxp_spifi_match, + }, +}; +module_platform_driver(nxp_spifi_driver); + +MODULE_DESCRIPTION("NXP SPI Flash Interface driver"); +MODULE_AUTHOR("Joachim Eastwood "); +MODULE_LICENSE("GPL v2");