Message ID | 1405421906-660-4-git-send-email-wangzhou.bry@gmail.com |
---|---|
State | Superseded |
Headers | show |
On 2014年07月15日 18:58, Zhou Wang wrote: > Signed-off-by: Zhou Wang <wangzhou.bry@gmail.com> > --- > .../devicetree/bindings/mtd/hisi-nand.txt | 40 ++++++++++++++++++++ > 1 file changed, 40 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mtd/hisi-nand.txt > Hi Randy Dunlap, Is there anything that should be modified about this binding document? It would be very appreciated that I could get some comments from you. Best regards, Zhou > diff --git a/Documentation/devicetree/bindings/mtd/hisi-nand.txt b/Documentation/devicetree/bindings/mtd/hisi-nand.txt > new file mode 100644 > index 0000000..c8b3988 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mtd/hisi-nand.txt > @@ -0,0 +1,40 @@ > +Hisilicon Hip04 Soc NAND controller DT binding > + > +Required properties: > +- compatible: Should be "hisilicon,504-nfc". > +- reg: The first contains base physical address and size of > + NAND controller's registers. The second contains base > + physical address and size of NAND controller's buffer. > +- interrupts: Interrupt number for nfc. > +- nand-bus-width: See nand.txt. > +- nand-ecc-mode: See nand.txt. > +- hisi,nand-ecc-bits: ECC bits type support. > + <0>: none ecc > + <1>: Can correct 1bit per 512byte. > + <6>: Can correct 16bits per 1K byte. > +- #address-cells: partition address, should be set 1. > +- #size-cells: partition size, should be set 1. > + > +Flash chip may optionally contain additional sub-nodes describing partitions of > +the address space. See partition.txt for more detail. > + > +Example: > + > + nand: nand@4020000 { > + compatible = "hisilicon,504-nfc"; > + reg = <0x4020000 0x10000>, <0x5000000 0x1000>; > + interrupts = <0 379 4>; > + nand-bus-width = <8>; > + nand-ecc-mode = "hw"; > + hisi,nand-ecc-bits = <1>; > + #address-cells = <1>; > + #size-cells = <1>; > + > + partition@0 { > + label = "nand_text"; > + reg = <0x00000000 0x00400000>; > + }; > + > + ... > + > + }; >
diff --git a/Documentation/devicetree/bindings/mtd/hisi-nand.txt b/Documentation/devicetree/bindings/mtd/hisi-nand.txt new file mode 100644 index 0000000..c8b3988 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/hisi-nand.txt @@ -0,0 +1,40 @@ +Hisilicon Hip04 Soc NAND controller DT binding + +Required properties: +- compatible: Should be "hisilicon,504-nfc". +- reg: The first contains base physical address and size of + NAND controller's registers. The second contains base + physical address and size of NAND controller's buffer. +- interrupts: Interrupt number for nfc. +- nand-bus-width: See nand.txt. +- nand-ecc-mode: See nand.txt. +- hisi,nand-ecc-bits: ECC bits type support. + <0>: none ecc + <1>: Can correct 1bit per 512byte. + <6>: Can correct 16bits per 1K byte. +- #address-cells: partition address, should be set 1. +- #size-cells: partition size, should be set 1. + +Flash chip may optionally contain additional sub-nodes describing partitions of +the address space. See partition.txt for more detail. + +Example: + + nand: nand@4020000 { + compatible = "hisilicon,504-nfc"; + reg = <0x4020000 0x10000>, <0x5000000 0x1000>; + interrupts = <0 379 4>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + hisi,nand-ecc-bits = <1>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "nand_text"; + reg = <0x00000000 0x00400000>; + }; + + ... + + };
Signed-off-by: Zhou Wang <wangzhou.bry@gmail.com> --- .../devicetree/bindings/mtd/hisi-nand.txt | 40 ++++++++++++++++++++ 1 file changed, 40 insertions(+) create mode 100644 Documentation/devicetree/bindings/mtd/hisi-nand.txt