diff mbox

[08/17] spi/qspi: Add api for get_buf/put_buf.

Message ID 1385451313-1875-9-git-send-email-sourav.poddar@ti.com
State Not Applicable
Headers show

Commit Message

Poddar, Sourav Nov. 26, 2013, 7:35 a.m. UTC 
Adapt qspi driver to use (get_buf/put_buf) pointers added
earlier.
These can be called just before the memcpy operations to get hold
of the memory mapped address and to turn on the controller clocks.

Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
---
 drivers/spi/spi-ti-qspi.c |   17 +++++++++++++++++
 1 files changed, 17 insertions(+), 0 deletions(-)
diff mbox

Patch

diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c
index 2323572..10bcb37 100644
--- a/drivers/spi/spi-ti-qspi.c
+++ b/drivers/spi/spi-ti-qspi.c
@@ -247,6 +247,21 @@  static void ti_qspi_configure_from_slave(struct spi_device *spi, u8 *val)
 	ti_qspi_write(qspi, memval, QSPI_SPI_SETUP0_REG);
 }
 
+static void ti_qspi_get_mem_buf(struct spi_master *master)
+{
+	struct ti_qspi *qspi = spi_master_get_devdata(master);
+
+	pm_runtime_get_sync(qspi->dev);
+	master->mem = qspi->mmap_base;
+}
+
+static void ti_qspi_put_mem_buf(struct spi_master *master)
+{
+	struct ti_qspi *qspi = spi_master_get_devdata(master);
+
+	pm_runtime_put(qspi->dev);
+}
+
 static void ti_qspi_restore_ctx(struct ti_qspi *qspi)
 {
 	struct ti_qspi_regs *ctx_reg = &qspi->ctx_reg;
@@ -515,6 +530,8 @@  static int ti_qspi_probe(struct platform_device *pdev)
 	master->dev.of_node = pdev->dev.of_node;
 	master->bits_per_word_mask = BIT(32 - 1) | BIT(16 - 1) | BIT(8 - 1);
 	master->configure_from_slave = ti_qspi_configure_from_slave;
+	master->get_buf = ti_qspi_get_mem_buf;
+	master->put_buf = ti_qspi_put_mem_buf;
 
 	if (!of_property_read_u32(np, "num-cs", &num_cs))
 		master->num_chipselect = num_cs;