diff mbox

[1/3] mtd: nandsim: remove autoincrement code

Message ID 1335917575-14953-1-git-send-email-computersforpeace@gmail.com
State Accepted
Commit 831d316b8b80b68dcdd2b3f5ede6d33c2bbf5835
Headers show

Commit Message

Brian Norris May 2, 2012, 12:12 a.m. UTC 
The NAND layer always has NAND_NO_AUTOINCR set, so we will never utilize the
AUTOINCR code in nandsim. We will be removing the NAND_NO_AUTOINCR option soon,
and so kill this code as well.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
---
 drivers/mtd/nand/nandsim.c |   28 +++-------------------------
 1 files changed, 3 insertions(+), 25 deletions(-)

Comments

Artem Bityutskiy May 2, 2012, 9:57 a.m. UTC | #1 
On Tue, 2012-05-01 at 17:12 -0700, Brian Norris wrote:
> The NAND layer always has NAND_NO_AUTOINCR set, so we will never utilize the
> AUTOINCR code in nandsim. We will be removing the NAND_NO_AUTOINCR option soon,
> and so kill this code as well.
> 
> Signed-off-by: Brian Norris <computersforpeace@gmail.com>

Pushed to l2-mtd.git, thanks.

P.S. Jumped at your patches to unblock you.
Brian Norris May 2, 2012, 5:22 p.m. UTC | #2 
On Wed, May 2, 2012 at 2:57 AM, Artem Bityutskiy <dedekind1@gmail.com> wrote:
> Pushed to l2-mtd.git, thanks.
>
> P.S. Jumped at your patches to unblock you.

Thanks, and thanks! Just sent out v4, rebased.
diff mbox

Patch

diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index 261f478..6cc8fbf 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -268,7 +268,6 @@  MODULE_PARM_DESC(bch,		 "Enable BCH ecc and set how many bits should "
 #define OPT_PAGE512      0x00000002 /* 512-byte  page chips */
 #define OPT_PAGE2048     0x00000008 /* 2048-byte page chips */
 #define OPT_SMARTMEDIA   0x00000010 /* SmartMedia technology chips */
-#define OPT_AUTOINCR     0x00000020 /* page number auto incrementation is possible */
 #define OPT_PAGE512_8BIT 0x00000040 /* 512-byte page chips with 8-bit bus width */
 #define OPT_PAGE4096     0x00000080 /* 4096-byte page chips */
 #define OPT_LARGEPAGE    (OPT_PAGE2048 | OPT_PAGE4096) /* 2048 & 4096-byte page chips */
@@ -594,7 +593,7 @@  static int init_nandsim(struct mtd_info *mtd)
 		ns->options |= OPT_PAGE256;
 	}
 	else if (ns->geom.pgsz == 512) {
-		ns->options |= (OPT_PAGE512 | OPT_AUTOINCR);
+		ns->options |= OPT_PAGE512;
 		if (ns->busw == 8)
 			ns->options |= OPT_PAGE512_8BIT;
 	} else if (ns->geom.pgsz == 2048) {
@@ -663,8 +662,6 @@  static int init_nandsim(struct mtd_info *mtd)
         for (i = 0; nand_flash_ids[i].name != NULL; i++) {
                 if (second_id_byte != nand_flash_ids[i].id)
                         continue;
-		if (!(nand_flash_ids[i].options & NAND_NO_AUTOINCR))
-			ns->options |= OPT_AUTOINCR;
 	}
 
 	if (ns->busw == 16)
@@ -1936,20 +1933,8 @@  static u_char ns_nand_read_byte(struct mtd_info *mtd)
 	if (ns->regs.count == ns->regs.num) {
 		NS_DBG("read_byte: all bytes were read\n");
 
-		/*
-		 * The OPT_AUTOINCR allows to read next consecutive pages without
-		 * new read operation cycle.
-		 */
-		if ((ns->options & OPT_AUTOINCR) && NS_STATE(ns->state) == STATE_DATAOUT) {
-			ns->regs.count = 0;
-			if (ns->regs.row + 1 < ns->geom.pgnum)
-				ns->regs.row += 1;
-			NS_DBG("read_byte: switch to the next page (%#x)\n", ns->regs.row);
-			do_state_action(ns, ACTION_CPY);
-		}
-		else if (NS_STATE(ns->nxstate) == STATE_READY)
+		if (NS_STATE(ns->nxstate) == STATE_READY)
 			switch_state(ns);
-
 	}
 
 	return outb;
@@ -2203,14 +2188,7 @@  static void ns_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
 	ns->regs.count += len;
 
 	if (ns->regs.count == ns->regs.num) {
-		if ((ns->options & OPT_AUTOINCR) && NS_STATE(ns->state) == STATE_DATAOUT) {
-			ns->regs.count = 0;
-			if (ns->regs.row + 1 < ns->geom.pgnum)
-				ns->regs.row += 1;
-			NS_DBG("read_buf: switch to the next page (%#x)\n", ns->regs.row);
-			do_state_action(ns, ACTION_CPY);
-		}
-		else if (NS_STATE(ns->nxstate) == STATE_READY)
+		if (NS_STATE(ns->nxstate) == STATE_READY)
 			switch_state(ns);
 	}