diff mbox

[v10,3/3] MTD : add GPMI-NAND driver in the config and Makefile

Message ID 1314171204-25458-4-git-send-email-b32955@freescale.com
State Accepted
Commit 157550ff77cb5087033382782f4e856094466c16
Headers show

Commit Message

Huang Shijie Aug. 24, 2011, 7:33 a.m. UTC 
add the GPMI-NAND driver in the relevant Kconfig and Makefile in the MTD.

Signed-off-by: Huang Shijie <b32955@freescale.com>
---
 drivers/mtd/nand/Kconfig            |   13 +++++++++++++
 drivers/mtd/nand/Makefile           |    1 +
 drivers/mtd/nand/gpmi-nand/Makefile |    3 +++
 3 files changed, 17 insertions(+), 0 deletions(-)
 create mode 100644 drivers/mtd/nand/gpmi-nand/Makefile

Comments

Marek Vasut Aug. 26, 2011, 3:15 p.m. UTC | #1 
On Wednesday, August 24, 2011 09:33:24 AM Huang Shijie wrote:
> add the GPMI-NAND driver in the relevant Kconfig and Makefile in the MTD.
> 
> Signed-off-by: Huang Shijie <b32955@freescale.com>

[...]

Acked-by: Marek Vasut <marek.vasut@gmail.com>
diff mbox

Patch

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 7ec5b49..42b7b86 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -417,6 +417,19 @@  config MTD_NAND_NANDSIM
 	  The simulator may simulate various NAND flash chips for the
 	  MTD nand layer.
 
+config MTD_NAND_GPMI_NAND
+        bool "GPMI NAND Flash Controller driver"
+        depends on MTD_NAND && (SOC_IMX23 || SOC_IMX28)
+	select MTD_PARTITIONS
+	select MTD_CMDLINE_PARTS
+        help
+	 Enables NAND Flash support for IMX23 or IMX28.
+	 The GPMI controller is very powerful, with the help of BCH
+	 module, it can do the hardware ECC. The GPMI supports several
+	 NAND flashs at the same time. The GPMI may conflicts with other
+	 block, such as SD card. So pay attention to it when you enable
+	 the GPMI.
+
 config MTD_NAND_PLATFORM
 	tristate "Support for generic platform NAND driver"
 	help
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index c9334e9..618f4ba 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -48,5 +48,6 @@  obj-$(CONFIG_MTD_NAND_BCM_UMI)		+= bcm_umi_nand.o nand_bcm_umi.o
 obj-$(CONFIG_MTD_NAND_MPC5121_NFC)	+= mpc5121_nfc.o
 obj-$(CONFIG_MTD_NAND_RICOH)		+= r852.o
 obj-$(CONFIG_MTD_NAND_JZ4740)		+= jz4740_nand.o
+obj-$(CONFIG_MTD_NAND_GPMI_NAND)	+= gpmi-nand/
 
 nand-objs := nand_base.o nand_bbt.o
diff --git a/drivers/mtd/nand/gpmi-nand/Makefile b/drivers/mtd/nand/gpmi-nand/Makefile
new file mode 100644
index 0000000..3a46248
--- /dev/null
+++ b/drivers/mtd/nand/gpmi-nand/Makefile
@@ -0,0 +1,3 @@ 
+obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi_nand.o
+gpmi_nand-objs += gpmi-nand.o
+gpmi_nand-objs += gpmi-lib.o