@@ -426,6 +426,16 @@ config MTD_NAND_NANDSIM
The simulator may simulate various NAND flash chips for the
MTD nand layer.
+config MTD_NAND_GPMI_NFC
+ bool "GPMI NAND Flash Controller driver"
+ depends on MTD_NAND && (SOC_IMX23 || SOC_IMX28)
+ select MTD_PARTITIONS
+ help
+ Enables NAND Flash support for IMX23 or IMX28.
+ The GPMI controller is very powerful, with the help of BCH
+ module, it can do the hardware ECC. The GPMI supports several
+ NAND flashs at the same time.
+
config MTD_NAND_PLATFORM
tristate "Support for generic platform NAND driver"
help
@@ -48,5 +48,6 @@ obj-$(CONFIG_MTD_NAND_BCM_UMI) += bcm_umi_nand.o nand_bcm_umi.o
obj-$(CONFIG_MTD_NAND_MPC5121_NFC) += mpc5121_nfc.o
obj-$(CONFIG_MTD_NAND_RICOH) += r852.o
obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o
+obj-$(CONFIG_MTD_NAND_GPMI_NFC) += gpmi-nfc/
nand-objs := nand_base.o nand_bbt.o
new file mode 100644
@@ -0,0 +1,7 @@
+obj-$(CONFIG_MTD_NAND_GPMI_NFC) += gpmi-nfc.o
+gpmi-nfc-objs += gpmi-nfc-main.o
+gpmi-nfc-objs += hal-imx23.o
+gpmi-nfc-objs += hal-imx28.o
+gpmi-nfc-objs += rom-imx23.o
+gpmi-nfc-objs += rom-imx28.o
+gpmi-nfc-objs += ../nand_device_info.o
add the GPMI driver in the relevant Kconfig and Makefile in the MTD. Signed-off-by: Huang Shijie <b32955@freescale.com> --- drivers/mtd/nand/Kconfig | 10 ++++++++++ drivers/mtd/nand/Makefile | 1 + drivers/mtd/nand/gpmi-nfc/Makefile | 7 +++++++ 3 files changed, 18 insertions(+), 0 deletions(-) create mode 100644 drivers/mtd/nand/gpmi-nfc/Makefile