@@ -418,7 +418,7 @@ retry:
* may try to recover data. FIXME: but this is
* not implemented.
*/
- if (err == UBI_IO_BAD_VID_HDR) {
+ if (err == UBI_IO_BAD_HDR) {
ubi_warn("corrupted VID header at PEB "
"%d, LEB %d:%d", pnum, vol_id,
lnum);
@@ -961,7 +961,7 @@ write_error:
*/
static int is_error_sane(int err)
{
- if (err == -EIO || err == -ENOMEM || err == UBI_IO_BAD_VID_HDR ||
+ if (err == -EIO || err == -ENOMEM || err == UBI_IO_BAD_HDR ||
err == -ETIMEDOUT)
return 0;
return 1;
@@ -515,7 +515,7 @@ static int nor_erase_prepare(struct ubi_device *ubi, int pnum)
* In this case we probably anyway have garbage in this PEB.
*/
err1 = ubi_io_read_vid_hdr(ubi, pnum, &vid_hdr, 0);
- if (err1 == UBI_IO_BAD_VID_HDR)
+ if (err1 == UBI_IO_BAD_HDR)
/*
* The VID header is corrupted, so we can safely erase this
* PEB and not afraid that it will be treated as a valid PEB in
@@ -709,7 +709,7 @@ bad:
* o %UBI_IO_BITFLIPS if the CRC is correct, but bit-flips were detected
* and corrected by the flash driver; this is harmless but may indicate that
* this eraseblock may become bad soon (but may be not);
- * o %UBI_IO_BAD_EC_HDR if the erase counter header is corrupted (a CRC error);
+ * o %UBI_IO_BAD_HDR if the erase counter header is corrupted (a CRC error);
* o %UBI_IO_PEB_EMPTY if the physical eraseblock is empty;
* o a negative error code in case of failure.
*/
@@ -774,7 +774,7 @@ int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum,
} else if (UBI_IO_DEBUG)
dbg_msg("bad magic number at PEB %d: %08x instead of "
"%08x", pnum, magic, UBI_EC_HDR_MAGIC);
- return UBI_IO_BAD_EC_HDR;
+ return UBI_IO_BAD_HDR;
}
crc = crc32(UBI_CRC32_INIT, ec_hdr, UBI_EC_HDR_SIZE_CRC);
@@ -788,7 +788,7 @@ int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum,
} else if (UBI_IO_DEBUG)
dbg_msg("bad EC header CRC at PEB %d, calculated "
"%#08x, read %#08x", pnum, crc, hdr_crc);
- return UBI_IO_BAD_EC_HDR;
+ return UBI_IO_BAD_HDR;
}
/* And of course validate what has just been read from the media */
@@ -977,7 +977,7 @@ bad:
* o %UBI_IO_BITFLIPS if the CRC is correct, but bit-flips were detected
* and corrected by the flash driver; this is harmless but may indicate that
* this eraseblock may become bad soon;
- * o %UBI_IO_BAD_VID_HDR if the volume identifier header is corrupted (a CRC
+ * o %UBI_IO_BAD_HDR if the volume identifier header is corrupted (a CRC
* error detected);
* o %UBI_IO_PEB_FREE if the physical eraseblock is free (i.e., there is no VID
* header there);
@@ -1045,7 +1045,7 @@ int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum,
} else if (UBI_IO_DEBUG)
dbg_msg("bad magic number at PEB %d: %08x instead of "
"%08x", pnum, magic, UBI_VID_HDR_MAGIC);
- return UBI_IO_BAD_VID_HDR;
+ return UBI_IO_BAD_HDR;
}
crc = crc32(UBI_CRC32_INIT, vid_hdr, UBI_VID_HDR_SIZE_CRC);
@@ -1059,7 +1059,7 @@ int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum,
} else if (UBI_IO_DEBUG)
dbg_msg("bad CRC at PEB %d, calculated %#08x, "
"read %#08x", pnum, crc, hdr_crc);
- return UBI_IO_BAD_VID_HDR;
+ return UBI_IO_BAD_HDR;
}
/* Validate the VID header that we have just read */
@@ -745,7 +745,7 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si,
bitflips = 1;
else if (err == UBI_IO_PEB_EMPTY)
return add_to_list(si, pnum, UBI_SCAN_UNKNOWN_EC, &si->erase);
- else if (err == UBI_IO_BAD_EC_HDR) {
+ else if (err == UBI_IO_BAD_HDR) {
/*
* We have to also look at the VID header, possibly it is not
* corrupted. Set %bitflips flag in order to make this PEB be
@@ -813,7 +813,7 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si,
return err;
else if (err == UBI_IO_BITFLIPS)
bitflips = 1;
- else if (err == UBI_IO_BAD_VID_HDR ||
+ else if (err == UBI_IO_BAD_HDR ||
(err == UBI_IO_PEB_FREE && ec_corr)) {
/* VID header is corrupted */
err = add_to_list(si, pnum, ec, &si->corr);
@@ -89,16 +89,13 @@
* %0xFF bytes
* UBI_IO_PEB_FREE: the physical eraseblock is free, i.e. it contains only a
* valid erase counter header, and the rest are %0xFF bytes
- * UBI_IO_BAD_EC_HDR: the erase counter header is corrupted (bad magic or CRC)
- * UBI_IO_BAD_VID_HDR: the volume identifier header is corrupted (bad magic or
- * CRC)
+ * UBI_IO_BAD_HDR: the EC or VID header is corrupted (bad magic or CRC)
* UBI_IO_BITFLIPS: bit-flips were detected and corrected
*/
enum {
UBI_IO_PEB_EMPTY = 1,
UBI_IO_PEB_FREE,
- UBI_IO_BAD_EC_HDR,
- UBI_IO_BAD_VID_HDR,
+ UBI_IO_BAD_HDR,
UBI_IO_BITFLIPS
};
We do not really need 2 separate error codes for indicating bad VID and bad EC headers (UBI_IO_BAD_EC_HDR, UBI_IO_BAD_VID_HDR), it is enough to have only one UBI_IO_BAD_HDR return code. This patch does not introduce any functional change, only some code simplification. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> --- drivers/mtd/ubi/eba.c | 4 ++-- drivers/mtd/ubi/io.c | 14 +++++++------- drivers/mtd/ubi/scan.c | 4 ++-- drivers/mtd/ubi/ubi.h | 7 ++----- 4 files changed, 13 insertions(+), 16 deletions(-)