@@ -165,7 +165,7 @@ static irqreturn_t mxc_nfc_irq(int irq, void *dev_id)
* complete by checking the INT bit of config2 register.
*/
static void wait_op_done(struct mxc_nand_host *host, int max_retries,
- uint16_t param, int useirq)
+ int useirq)
{
uint32_t tmp;
@@ -194,8 +194,8 @@ static void wait_op_done(struct mxc_nand_host *host, int max_retries,
udelay(1);
}
if (max_retries < 0)
- DEBUG(MTD_DEBUG_LEVEL0, "%s(%d): INT not set\n",
- __func__, param);
+ DEBUG(MTD_DEBUG_LEVEL0, "%s: INT not set\n",
+ __func__);
}
}
@@ -209,7 +209,7 @@ static void send_cmd(struct mxc_nand_host *host, uint16_t cmd, int useirq)
writew(NFC_CMD, host->regs + NFC_CONFIG2);
/* Wait for operation to complete */
- wait_op_done(host, TROP_US_DELAY, cmd, useirq);
+ wait_op_done(host, TROP_US_DELAY, useirq);
}
/* This function sends an address (or partial address) to the
@@ -223,7 +223,7 @@ static void send_addr(struct mxc_nand_host *host, uint16_t addr, int islast)
writew(NFC_ADDR, host->regs + NFC_CONFIG2);
/* Wait for operation to complete */
- wait_op_done(host, TROP_US_DELAY, addr, islast);
+ wait_op_done(host, TROP_US_DELAY, islast);
}
static void send_page(struct mxc_nand_host *host, uint8_t buf_id,
@@ -247,7 +247,7 @@ static void send_page(struct mxc_nand_host *host, uint8_t buf_id,
writew(ops, host->regs + NFC_CONFIG2);
/* Wait for operation to complete */
- wait_op_done(host, TROP_US_DELAY, spare_only, true);
+ wait_op_done(host, TROP_US_DELAY, true);
}
/* Request the NANDFC to perform a read of the NAND device ID. */
@@ -267,7 +267,7 @@ static void send_read_id(struct mxc_nand_host *host)
writew(NFC_ID, host->regs + NFC_CONFIG2);
/* Wait for operation to complete */
- wait_op_done(host, TROP_US_DELAY, 0, true);
+ wait_op_done(host, TROP_US_DELAY, true);
if (this->options & NAND_BUSWIDTH_16) {
void __iomem *main_buf = host->regs + MAIN_AREA0;
@@ -303,7 +303,7 @@ static uint16_t get_dev_status(struct mxc_nand_host *host)
writew(NFC_STATUS, host->regs + NFC_CONFIG2);
/* Wait for operation to complete */
- wait_op_done(host, TROP_US_DELAY, 0, true);
+ wait_op_done(host, TROP_US_DELAY, true);
/* Status is placed in first word of main buffer */
/* get status, then recovery area 1 data */
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- drivers/mtd/nand/mxc_nand.c | 16 ++++++++-------- 1 files changed, 8 insertions(+), 8 deletions(-)