diff mbox series

[06/15] ARM: dts: imx6qdl-sabreauto: Use explicit swpad values

Message ID 20190211141333.28725-6-u.kleine-koenig@pengutronix.de
State New
Headers show
Series [01/15] ARM: dts: imx6qdl-fdi-fs700-m60: Use explicit swpad values | expand

Commit Message

Uwe Kleine-König Feb. 11, 2019, 2:13 p.m. UTC 
Instead of relying on reset defaults or a bootloader to configure
use explicit values for the swpad configuration. Here the reset
defaults are used owing to lack of other evidence.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index 1280de50a984..e3dab97dd168 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -466,9 +466,9 @@ 
 	imx6qdl-sabreauto {
 		pinctrl_hog: hoggrp {
 			fsl,pins = <
-				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000
-				MX6QDL_PAD_SD2_DAT2__GPIO1_IO13  0x80000000
-				MX6QDL_PAD_GPIO_18__SD3_VSELECT 0x17059
+				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x1b0b0
+				MX6QDL_PAD_SD2_DAT2__GPIO1_IO13		0x1b0b0
+				MX6QDL_PAD_GPIO_18__SD3_VSELECT		0x17059
 			>;
 		};
 
@@ -482,7 +482,7 @@ 
 
 		pinctrl_ecspi1_cs: ecspi1cs {
 			fsl,pins = <
-				MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x1b0b0
 			>;
 		};
 
@@ -554,7 +554,7 @@ 
 
 		pinctrl_gpio_leds: gpioledsgrp {
 			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x80000000
+				MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x1b0b0
 			>;
 		};