diff mbox series

[04/15] ARM: dts: imx6qdl-phytec-pbab01/pfla02: Use explicit swpad values

Message ID 20190211141333.28725-4-u.kleine-koenig@pengutronix.de
State New
Headers show
Series [01/15] ARM: dts: imx6qdl-fdi-fs700-m60: Use explicit swpad values | expand

Commit Message

Uwe Kleine-König Feb. 11, 2019, 2:13 p.m. UTC
Instead of relying on reset defaults or a bootloader to configure
use explicit values for the swpad configuration. Here the reset
defaults of the i.MX6dl are used owing to lack of other evidence. (They
differ from the i.MX6q defaults for GPIO_0 and KEY_ROW4.)

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

Comments

Marco Felsch Feb. 12, 2019, 8:15 a.m. UTC | #1
Hi Uwe,

On 19-02-11 15:13, Uwe Kleine-König wrote:
> Instead of relying on reset defaults or a bootloader to configure
> use explicit values for the swpad configuration. Here the reset
> defaults of the i.MX6dl are used owing to lack of other evidence. (They
> differ from the i.MX6q defaults for GPIO_0 and KEY_ROW4.)

Rely on the reset/bootloader values isn't that good at all. Since the
bootloader use case can be different. I've checked your patch against a
vanilla barebox (bootloader) which includes this devicetree. My test
setup was a imx6q pfla02 SoM and a pbab01 baseboard. Please look my
comment below.

> 
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> ---
>  arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 20 ++++++++++----------
>  1 file changed, 10 insertions(+), 10 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
> index 1b50b01e9bac..8e04ab7df2d7 100644
> --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
> @@ -211,11 +211,11 @@
>  	imx6q-phytec-pfla02 {
>  		pinctrl_hog: hoggrp {
>  			fsl,pins = <
> -				MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000
> -				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */
> -				MX6QDL_PAD_SD4_DAT1__GPIO2_IO09  0x80000000 /* PMIC interrupt */
> -				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* Green LED */
> -				MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x80000000 /* Red LED */
> +				MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x1b0b0
> +				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x1b0b0 /* SPI NOR chipselect */
> +				MX6QDL_PAD_SD4_DAT1__GPIO2_IO09		0x1b0b0 /* PMIC interrupt */
> +				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0 /* Green LED */
> +				MX6QDL_PAD_EIM_EB3__GPIO2_IO31		0x1b0b1 /* Red LED */

Don't wanna nitpick, the MX6QDL_PAD_EIM_EB3__GPIO2_IO31 pad should be
configured to 0x1b0b0 too, but I don't know the default imx6dl
behaviour as you mentioned above. So I'm fine with the patch.

Acked-by: Marco Felsch <m.felsch@pengutronix.de>

>  			>;
>  		};
>  
> @@ -299,7 +299,7 @@
>  		};
>  
>  		pinctrl_pcie: pciegrp {
> -			fsl,pins = <MX6QDL_PAD_DI0_PIN15__GPIO4_IO17  0x80000000>;
> +			fsl,pins = <MX6QDL_PAD_DI0_PIN15__GPIO4_IO17	0x1b0b0>;
>  		};
>  
>  		pinctrl_uart3: uart3grp {
> @@ -320,7 +320,7 @@
>  
>  		pinctrl_usbh1: usbh1grp {
>  			fsl,pins = <
> -				MX6QDL_PAD_GPIO_0__USB_H1_PWR		0x80000000
> +				MX6QDL_PAD_GPIO_0__USB_H1_PWR		0x130b0
>  			>;
>  		};
>  
> @@ -328,7 +328,7 @@
>  			fsl,pins = <
>  				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
>  				MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b0
> -				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x80000000
> +				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x130b0
>  			>;
>  		};
>  
> @@ -356,8 +356,8 @@
>  
>  		pinctrl_usdhc3_cdwp: usdhc3cdwp {
>  			fsl,pins = <
> -				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000
> -				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
> +				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x1b0b0
> +				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0
>  			>;
>  		};
>  
> -- 
> 2.20.1
> 
> 
>
Uwe Kleine-König Feb. 12, 2019, 8:24 a.m. UTC | #2
On Tue, Feb 12, 2019 at 09:15:45AM +0100, Marco Felsch wrote:
> Hi Uwe,
> 
> On 19-02-11 15:13, Uwe Kleine-König wrote:
> > Instead of relying on reset defaults or a bootloader to configure
> > use explicit values for the swpad configuration. Here the reset
> > defaults of the i.MX6dl are used owing to lack of other evidence. (They
> > differ from the i.MX6q defaults for GPIO_0 and KEY_ROW4.)
> 
> Rely on the reset/bootloader values isn't that good at all. Since the
> bootloader use case can be different. I've checked your patch against a
> vanilla barebox (bootloader) which includes this devicetree. My test
> setup was a imx6q pfla02 SoM and a pbab01 baseboard. Please look my
> comment below.
> 
> > 
> > Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> > ---
> >  arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 20 ++++++++++----------
> >  1 file changed, 10 insertions(+), 10 deletions(-)
> > 
> > diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
> > index 1b50b01e9bac..8e04ab7df2d7 100644
> > --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
> > +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
> > @@ -211,11 +211,11 @@
> >  	imx6q-phytec-pfla02 {
> >  		pinctrl_hog: hoggrp {
> >  			fsl,pins = <
> > -				MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000
> > -				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */
> > -				MX6QDL_PAD_SD4_DAT1__GPIO2_IO09  0x80000000 /* PMIC interrupt */
> > -				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* Green LED */
> > -				MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x80000000 /* Red LED */
> > +				MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x1b0b0
> > +				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x1b0b0 /* SPI NOR chipselect */
> > +				MX6QDL_PAD_SD4_DAT1__GPIO2_IO09		0x1b0b0 /* PMIC interrupt */
> > +				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0 /* Green LED */
> > +				MX6QDL_PAD_EIM_EB3__GPIO2_IO31		0x1b0b1 /* Red LED */
> 
> Don't wanna nitpick, the MX6QDL_PAD_EIM_EB3__GPIO2_IO31 pad should be
> configured to 0x1b0b0 too, but I don't know the default imx6dl
> behaviour as you mentioned above. So I'm fine with the patch.

This is a bug in my linter's data table. EIM_EB3 should use 0x1b0b0 on
both imx6q and imx6dl.

I will wait a bit more for feedback, and then probably respin with this
fixed. Thanks for your input.

Best regards
Uwe
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index 1b50b01e9bac..8e04ab7df2d7 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -211,11 +211,11 @@ 
 	imx6q-phytec-pfla02 {
 		pinctrl_hog: hoggrp {
 			fsl,pins = <
-				MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000
-				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */
-				MX6QDL_PAD_SD4_DAT1__GPIO2_IO09  0x80000000 /* PMIC interrupt */
-				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* Green LED */
-				MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x80000000 /* Red LED */
+				MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x1b0b0
+				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x1b0b0 /* SPI NOR chipselect */
+				MX6QDL_PAD_SD4_DAT1__GPIO2_IO09		0x1b0b0 /* PMIC interrupt */
+				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0 /* Green LED */
+				MX6QDL_PAD_EIM_EB3__GPIO2_IO31		0x1b0b1 /* Red LED */
 			>;
 		};
 
@@ -299,7 +299,7 @@ 
 		};
 
 		pinctrl_pcie: pciegrp {
-			fsl,pins = <MX6QDL_PAD_DI0_PIN15__GPIO4_IO17  0x80000000>;
+			fsl,pins = <MX6QDL_PAD_DI0_PIN15__GPIO4_IO17	0x1b0b0>;
 		};
 
 		pinctrl_uart3: uart3grp {
@@ -320,7 +320,7 @@ 
 
 		pinctrl_usbh1: usbh1grp {
 			fsl,pins = <
-				MX6QDL_PAD_GPIO_0__USB_H1_PWR		0x80000000
+				MX6QDL_PAD_GPIO_0__USB_H1_PWR		0x130b0
 			>;
 		};
 
@@ -328,7 +328,7 @@ 
 			fsl,pins = <
 				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
 				MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b0
-				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x80000000
+				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x130b0
 			>;
 		};
 
@@ -356,8 +356,8 @@ 
 
 		pinctrl_usdhc3_cdwp: usdhc3cdwp {
 			fsl,pins = <
-				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000
-				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
+				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x1b0b0
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0
 			>;
 		};