| Message ID | 20170208233023.31922-2-zajec5@gmail.com |
|---|---|
| State | New |
| Headers | show |
On Wed, Feb 8, 2017 at 6:30 PM, Rafał Miłecki <zajec5@gmail.com> wrote: > From: Rafał Miłecki <rafal@milecki.pl> > > This reverts commit c8ca631f9480 ("dt-bindings: phy: Add documentation > for NSP USB3 PHY") to match reverting commit adding the new PHY driver. > Please note we revert this commit before it reached stable release. > > If new compatible string is needed it should be added to the existing > bcm-ns-usb3-phy.txt which already describes this PHY. > > Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (previous email got caught in HTML filters) Per the discussion with Rafal, this is acceptable Acked-by: Jon Mason <jon.mason@broadcom.com> > --- > .../devicetree/bindings/phy/brcm,nsp-usb3-phy.txt | 39 ---------------------- > 1 file changed, 39 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/phy/brcm,nsp-usb3-phy.txt > > diff --git a/Documentation/devicetree/bindings/phy/brcm,nsp-usb3-phy.txt b/Documentation/devicetree/bindings/phy/brcm,nsp-usb3-phy.txt > deleted file mode 100644 > index e68ae5dec9c9..000000000000 > --- a/Documentation/devicetree/bindings/phy/brcm,nsp-usb3-phy.txt > +++ /dev/null > @@ -1,39 +0,0 @@ > -Broadcom USB3 phy binding for northstar plus SoC > -The USB3 phy is internal to the SoC and is accessed using mdio interface. > - > -Required mdio bus properties: > -- reg: Should be 0x0 for SoC internal USB3 phy > -- #address-cells: must be 1 > -- #size-cells: must be 0 > - > -Required USB3 PHY properties: > -- compatible: should be "brcm,nsp-usb3-phy" > -- reg: USB3 Phy address on SoC internal MDIO bus and it should be 0x10. > -- usb3-ctrl-syscon: handler of syscon node defining physical address > - of usb3 control register. > -- #phy-cells: must be 0 > - > -Required usb3 control properties: > -- compatible: should be "brcm,nsp-usb3-ctrl" > -- reg: offset and length of the control registers > - > -Example: > - > - mdio@0 { > - reg = <0x0>; > - #address-cells = <1>; > - #size-cells = <0>; > - > - usb3_phy: usb-phy@10 { > - compatible = "brcm,nsp-usb3-phy"; > - reg = <0x10>; > - usb3-ctrl-syscon = <&usb3_ctrl>; > - #phy-cells = <0>; > - status = "disabled"; > - }; > - }; > - > - usb3_ctrl: syscon@104408 { > - compatible = "brcm,nsp-usb3-ctrl", "syscon"; > - reg = <0x104408 0x3fc>; > - }; > -- > 2.11.0 >
On Thu, Feb 09, 2017 at 12:30:23AM +0100, Rafał Miłecki wrote: > From: Rafał Miłecki <rafal@milecki.pl> > > This reverts commit c8ca631f9480 ("dt-bindings: phy: Add documentation > for NSP USB3 PHY") to match reverting commit adding the new PHY driver. > Please note we revert this commit before it reached stable release. > > If new compatible string is needed it should be added to the existing > bcm-ns-usb3-phy.txt which already describes this PHY. > > Signed-off-by: Rafał Miłecki <rafal@milecki.pl> > --- > .../devicetree/bindings/phy/brcm,nsp-usb3-phy.txt | 39 ---------------------- > 1 file changed, 39 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/phy/brcm,nsp-usb3-phy.txt Acked-by: Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/phy/brcm,nsp-usb3-phy.txt b/Documentation/devicetree/bindings/phy/brcm,nsp-usb3-phy.txt deleted file mode 100644 index e68ae5dec9c9..000000000000 --- a/Documentation/devicetree/bindings/phy/brcm,nsp-usb3-phy.txt +++ /dev/null @@ -1,39 +0,0 @@ -Broadcom USB3 phy binding for northstar plus SoC -The USB3 phy is internal to the SoC and is accessed using mdio interface. - -Required mdio bus properties: -- reg: Should be 0x0 for SoC internal USB3 phy -- #address-cells: must be 1 -- #size-cells: must be 0 - -Required USB3 PHY properties: -- compatible: should be "brcm,nsp-usb3-phy" -- reg: USB3 Phy address on SoC internal MDIO bus and it should be 0x10. -- usb3-ctrl-syscon: handler of syscon node defining physical address - of usb3 control register. -- #phy-cells: must be 0 - -Required usb3 control properties: -- compatible: should be "brcm,nsp-usb3-ctrl" -- reg: offset and length of the control registers - -Example: - - mdio@0 { - reg = <0x0>; - #address-cells = <1>; - #size-cells = <0>; - - usb3_phy: usb-phy@10 { - compatible = "brcm,nsp-usb3-phy"; - reg = <0x10>; - usb3-ctrl-syscon = <&usb3_ctrl>; - #phy-cells = <0>; - status = "disabled"; - }; - }; - - usb3_ctrl: syscon@104408 { - compatible = "brcm,nsp-usb3-ctrl", "syscon"; - reg = <0x104408 0x3fc>; - };