| Message ID | 20141119070752.GG27759@dragon |
|---|---|
| State | New |
| Headers | show |
On Wednesday 19 November 2014, Shawn Guo wrote: > Hi Olof, Arnd, > > This pull request is based on the SoC pull request which tagged as > imx-soc-3.19. Please pull, thanks. > > Shawn > > The following changes since commit dc7aaa041842eb40be7ad7bde0a7e37ac1efd79c: > > ARM: configs: imx_v6_v7_defconfig: add power off driver (2014-11-19 11:51:55 +0800) > > are available in the git repository at: > > git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt-3.19 > > for you to fetch changes up to c95e259674da685152eb093263478c7ada0aa904: > > ARM: dts: imx6: add pm_power_off support for i.mx6 chips (2014-11-19 11:59:38 +0800) > > ---------------------------------------------------------------- > The i.MX device tree changes for 3.19: > - Device additions for board vf610-colibri, pwm, backlight, I2C, RTC, > ADC etc. > - Update i.MX6 phyFLEX board to include PCIe, CAN and audio support > - Improve SSI clocks description for i.MX5 platforms > - Add ENET2 support for imx6sx-sdb board > - Add device tree source for LS1021A SoC, board QDS and TWR > - Enable cpufreq support for i.MX53 > - Enable VPU device support for i.MX6QDL > - Enable poweroff support for i.MX6 SoCs > - Add support for TBS2910 Matrix ARM mini PC which is built on i.MX6Q > - Create generic base device trees for Vybrid and add support for > Colibri VF50 > Again, all changes here look good to me, but as it's based on top of hte other branch, please rebase again. Can you also explain in the tag description why you have based on the other branch? I assume you had a good reason, but it's not obvious to me. Arnd
On Fri, Nov 21, 2014 at 12:33 AM, Arnd Bergmann <arnd@arndb.de> wrote: > Again, all changes here look good to me, but as it's based on top of hte > other branch, please rebase again. Can you also explain in the tag > description why you have based on the other branch? I assume you had > a good reason, but it's not obvious to me. The patch "ARM: dts: imx53: add cpufreq-dt support" on imx/dt branch uses the clock define IMX5_CLK_ARM that is added by "ARM: imx53: clk: add ARM clock" sitting on imx/soc branch. I will put a note into the tag description regarding this dependency. Shawn
On Friday 21 November 2014 16:41:56 Shawn Guo wrote: > On Fri, Nov 21, 2014 at 12:33 AM, Arnd Bergmann <arnd@arndb.de> wrote: > > Again, all changes here look good to me, but as it's based on top of hte > > other branch, please rebase again. Can you also explain in the tag > > description why you have based on the other branch? I assume you had > > a good reason, but it's not obvious to me. > > The patch "ARM: dts: imx53: add cpufreq-dt support" on imx/dt branch > uses the clock define IMX5_CLK_ARM that is added by "ARM: imx53: clk: > add ARM clock" sitting on imx/soc branch. I will put a note into the > tag description regarding this dependency. Ok, thanks! Arnd
Hi Olof, Arnd, This pull request is based on the SoC pull request which tagged as imx-soc-3.19. Please pull, thanks. Shawn The following changes since commit dc7aaa041842eb40be7ad7bde0a7e37ac1efd79c: ARM: configs: imx_v6_v7_defconfig: add power off driver (2014-11-19 11:51:55 +0800) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt-3.19 for you to fetch changes up to c95e259674da685152eb093263478c7ada0aa904: ARM: dts: imx6: add pm_power_off support for i.mx6 chips (2014-11-19 11:59:38 +0800) ---------------------------------------------------------------- The i.MX device tree changes for 3.19: - Device additions for board vf610-colibri, pwm, backlight, I2C, RTC, ADC etc. - Update i.MX6 phyFLEX board to include PCIe, CAN and audio support - Improve SSI clocks description for i.MX5 platforms - Add ENET2 support for imx6sx-sdb board - Add device tree source for LS1021A SoC, board QDS and TWR - Enable cpufreq support for i.MX53 - Enable VPU device support for i.MX6QDL - Enable poweroff support for i.MX6 SoCs - Add support for TBS2910 Matrix ARM mini PC which is built on i.MX6Q - Create generic base device trees for Vybrid and add support for Colibri VF50 ---------------------------------------------------------------- Bhuvanchandra DV (5): ARM: dts: vf610: Add PWM second instance ARM: dts: vf610-colibri: Add PWM support ARM: dts: vf610-colibri: Add backlight support ARM: dts: vf-colibri: Add I2C support ARM: dts: vf-colibri-eval-v3.dts: Enable ST-M41T0M6 RTC Christian Hemp (5): ARM: dts: imx6: phyFLEX: set nodes in alphabetical order ARM: dts: imx6: phyFLEX: Enable gpmi in module file ARM: dts: imx6: phyFLEX: Set correct interrupt for pmic ARM: dts: imx6: phyFLEX: Add PCIe ARM: dts: imx6: phyFLEX: Add CAN support Dmitry Lavnikevich (2): ARM: dts: pbab01: move i2c pins and frequency configuration into pfla02 ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards Fabio Estevam (3): ARM: dts: imx53: Improve SSI clocks description ARM: dts: imx51: Improve SSI clocks description ARM: dts: imx6q-tbs2910: Remove unneeded 'fsl,mode' property Fugang Duan (1): ARM: dts: imx6x: Add enet2 support for imx6sx-sdb board Jingchang Lu (4): ARM: dts: Add SoC level device tree support for LS1021A ARM: dts: Add initial LS1021A QDS board dts support ARM: dts: Add initial LS1021A TWR board dts support dt-bindings: arm: add Freescale LS1021A SoC device tree binding Lucas Stach (1): ARM: dts: imx53: add cpufreq-dt support Philipp Zabel (1): ARM: dts: imx6qdl: Enable CODA960 VPU Robin Gong (1): ARM: dts: imx6: add pm_power_off support for i.mx6 chips Sanchayan Maity (1): ARM: dts: vf610-colibri: Add ADC support Soeren Moch (2): devicetree: bindings: Add vendor prefix for TBS Technologies ARM: dts: add initial support for TBS2910 Matrix ARM mini PC Stefan Agner (7): ARM: dts: vf610: Add ARM Global Timer ARM: dts: vf610: assign oscillator to clock module ARM: dts: vf610: create generic base device trees ARM: dts: vf500-colibri: add Colibri VF50 support ARM: dts: vf610: use new GPIO support ARM: dts: vf610: enable USB misc/phy nodes where necessary ARM: dts: vf-colibri: add USB regulators Vladimir Zapolskiy (1): ARM: dts: imx6dl: add alias for I2C4 bus Documentation/devicetree/bindings/arm/fsl.txt | 38 ++ .../devicetree/bindings/clock/vf610-clock.txt | 15 + .../devicetree/bindings/vendor-prefixes.txt | 1 + arch/arm/boot/dts/Makefile | 4 + arch/arm/boot/dts/imx51.dtsi | 12 +- arch/arm/boot/dts/imx53.dtsi | 25 +- arch/arm/boot/dts/imx6dl.dtsi | 8 + arch/arm/boot/dts/imx6q-tbs2910.dts | 428 ++++++++++++++++++ arch/arm/boot/dts/imx6q.dtsi | 4 + arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi | 131 ++++-- arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 97 +++- arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 4 + arch/arm/boot/dts/imx6qdl.dtsi | 14 + arch/arm/boot/dts/imx6sl-evk.dts | 4 + arch/arm/boot/dts/imx6sl.dtsi | 6 + arch/arm/boot/dts/imx6sx-sdb.dts | 66 +++ arch/arm/boot/dts/imx6sx.dtsi | 8 +- arch/arm/boot/dts/ls1021a-qds.dts | 240 ++++++++++ arch/arm/boot/dts/ls1021a-twr.dts | 127 ++++++ arch/arm/boot/dts/ls1021a.dtsi | 408 +++++++++++++++++ arch/arm/boot/dts/vf-colibri-eval-v3.dtsi | 96 ++++ arch/arm/boot/dts/vf-colibri.dtsi | 186 ++++++++ arch/arm/boot/dts/vf500-colibri-eval-v3.dts | 17 + arch/arm/boot/dts/vf500-colibri.dtsi | 20 + arch/arm/boot/dts/vf500.dtsi | 171 ++++++++ arch/arm/boot/dts/vf610-colibri-eval-v3.dts | 33 +- arch/arm/boot/dts/vf610-colibri.dtsi | 100 +---- arch/arm/boot/dts/vf610-cosmic.dts | 14 +- arch/arm/boot/dts/vf610-twr.dts | 46 +- arch/arm/boot/dts/vf610.dtsi | 486 +-------------------- arch/arm/boot/dts/vfxxx.dtsi | 437 ++++++++++++++++++ 31 files changed, 2575 insertions(+), 671 deletions(-) create mode 100644 arch/arm/boot/dts/imx6q-tbs2910.dts create mode 100644 arch/arm/boot/dts/ls1021a-qds.dts create mode 100644 arch/arm/boot/dts/ls1021a-twr.dts create mode 100644 arch/arm/boot/dts/ls1021a.dtsi create mode 100644 arch/arm/boot/dts/vf-colibri-eval-v3.dtsi create mode 100644 arch/arm/boot/dts/vf-colibri.dtsi create mode 100644 arch/arm/boot/dts/vf500-colibri-eval-v3.dts create mode 100644 arch/arm/boot/dts/vf500-colibri.dtsi create mode 100644 arch/arm/boot/dts/vf500.dtsi create mode 100644 arch/arm/boot/dts/vfxxx.dtsi