diff mbox

[v3,10/12] ARM: dts: Berlin: enable USB on the BG2Q DMP

Message ID 1405499166-6726-11-git-send-email-antoine.tenart@free-electrons.com
State New
Headers show

Commit Message

Antoine Tenart July 16, 2014, 8:26 a.m. UTC 
Enable the 2 available USB PHY and USB nodes on the Marvell Berlin BG2Q
DMP.

Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com>
---
 arch/arm/boot/dts/berlin2q-marvell-dmp.dts | 53 ++++++++++++++++++++++++++++++
 1 file changed, 53 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
index 995150f93795..0d515046f5f5 100644
--- a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
+++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
@@ -7,6 +7,8 @@ 
  */
 
 /dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
 #include "berlin2q.dtsi"
 
 / {
@@ -21,6 +23,39 @@ 
 	choosen {
 		bootargs = "console=ttyS0,115200 earlyprintk";
 	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb0_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			regulator-name = "usb0_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&portb 8 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb1_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&portb 10 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb2_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			regulator-name = "usb2_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&portb 12 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
 };
 
 &sdhci1 {
@@ -37,3 +72,21 @@ 
 &uart0 {
 	status = "okay";
 };
+
+&usb_phy0 {
+	status = "okay";
+};
+
+&usb_phy2 {
+	status = "okay";
+};
+
+&usb0 {
+	vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
+
+&usb2 {
+	vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};