diff mbox

[v2,14/37] staging: imx-drm: parallel display: add regulator support.

Message ID 1382022155-21954-15-git-send-email-denis@eukrea.com
State New
Headers show

Commit Message

Denis Carikli Oct. 17, 2013, 3:02 p.m. UTC 
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: devicetree@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: driverdev-devel@linuxdriverproject.org
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Eric Bénard <eric@eukrea.com>
Signed-off-by: Denis Carikli <denis@eukrea.com>
---
 drivers/staging/imx-drm/parallel-display.c |   19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

Comments

Dan Carpenter Oct. 17, 2013, 4:47 p.m. UTC | #1 
On Thu, Oct 17, 2013 at 05:02:12PM +0200, Denis Carikli wrote:
> +	if (imxpd->lcd_reg)
> +		if (regulator_enable(imxpd->lcd_reg))
> +			dev_err(imxpd->dev, "Failed to enable lcd regulator.\n");
> +

In staging the style is to use braces around multi-line indents for
readability.  Or you could do:

	if (imxpd->lcd_reg && regulator_enable(imxpd->lcd_reg))
		dev_err(imxpd->dev, "Failed to enable lcd regulator.\n");

These kind of tiny things aren't worth resending, but for next time.

regards,
dan carpenter
diff mbox

Patch

diff --git a/drivers/staging/imx-drm/parallel-display.c b/drivers/staging/imx-drm/parallel-display.c
index 1c8f63f..dfab7b5 100644
--- a/drivers/staging/imx-drm/parallel-display.c
+++ b/drivers/staging/imx-drm/parallel-display.c
@@ -22,6 +22,7 @@ 
 #include <drm/drmP.h>
 #include <drm/drm_fb_helper.h>
 #include <drm/drm_crtc_helper.h>
+#include <linux/regulator/consumer.h>
 #include <linux/videodev2.h>
 #include <video/videomode.h>
 #include <video/of_display_timing.h>
@@ -37,6 +38,7 @@  struct imx_parallel_display {
 	struct drm_encoder encoder;
 	struct imx_drm_encoder *imx_drm_encoder;
 	struct device *dev;
+	struct regulator *lcd_reg;
 	void *edid;
 	int edid_len;
 	u32 interface_pix_fmt;
@@ -129,6 +131,10 @@  static void imx_pd_encoder_prepare(struct drm_encoder *encoder)
 {
 	struct imx_parallel_display *imxpd = enc_to_imxpd(encoder);
 
+	if (imxpd->lcd_reg)
+		if (regulator_enable(imxpd->lcd_reg))
+			dev_err(imxpd->dev, "Failed to enable lcd regulator.\n");
+
 	imx_drm_crtc_panel_format(encoder->crtc, DRM_MODE_ENCODER_NONE,
 			imxpd->interface_pix_fmt);
 }
@@ -145,6 +151,11 @@  static void imx_pd_encoder_mode_set(struct drm_encoder *encoder,
 
 static void imx_pd_encoder_disable(struct drm_encoder *encoder)
 {
+	struct imx_parallel_display *imxpd = enc_to_imxpd(encoder);
+
+	if (imxpd->lcd_reg)
+		if (regulator_disable(imxpd->lcd_reg))
+			dev_err(imxpd->dev, "Failed to disable lcd regulator.\n");
 }
 
 static void imx_pd_encoder_destroy(struct drm_encoder *encoder)
@@ -248,6 +259,14 @@  static int imx_pd_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	imxpd->lcd_reg = devm_regulator_get(&pdev->dev, "lcd");
+	if (IS_ERR(imxpd->lcd_reg)) {
+		dev_dbg(&pdev->dev, "no lcd-supply given.\n");
+		imxpd->lcd_reg = NULL;
+	} else {
+		dev_info(&pdev->dev, "lcd-supply found.\n");
+	}
+
 	ret = imx_drm_encoder_add_possible_crtcs(imxpd->imx_drm_encoder, np);
 
 	platform_set_drvdata(pdev, imxpd);