diff mbox

[34/34] ARM: imx: enable multi-platform build

Message ID 1347860103-4141-35-git-send-email-shawn.guo@linaro.org
State New
Headers show

Commit Message

Shawn Guo Sept. 17, 2012, 5:35 a.m. UTC 
It enables multi-platform build for imx.  ARCH_MXC, ARCH_IMX_V4_V5 and
ARCH_IMX_V6_V7 become invisible options to users, and are controlled
by multi-platform options.  AUTO_ZRELADDR and ARM_PATCH_PHYS_VIRT
are selected by ARCH_MXC now to save the duplication.

Headers timex.h and uncompress.h are not needed for multi-platform
build.  Remove them.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 arch/arm/Kconfig                            |   13 ---
 arch/arm/mach-imx/Kconfig                   |   46 +++++-----
 arch/arm/mach-imx/include/mach/timex.h      |   22 -----
 arch/arm/mach-imx/include/mach/uncompress.h |  132 ---------------------------
 4 files changed, 22 insertions(+), 191 deletions(-)
 delete mode 100644 arch/arm/mach-imx/include/mach/timex.h
 delete mode 100644 arch/arm/mach-imx/include/mach/uncompress.h

Comments

Arnd Bergmann Sept. 17, 2012, 11:44 a.m. UTC | #1 
On Monday 17 September 2012, Shawn Guo wrote:
> -menu "Freescale MXC Implementations"
> -
> -choice
> -       prompt "Freescale CPU family:"
> -       default ARCH_IMX_V6_V7
> -
>  config ARCH_IMX_V4_V5
> -       bool "i.MX1, i.MX21, i.MX25, i.MX27"
> -       select AUTO_ZRELADDR if !ZBOOT_ROM
> -       select ARM_PATCH_PHYS_VIRT
> -       help
> -         This enables support for systems based on the Freescale i.MX ARMv4
> -         and ARMv5 SoCs
> +       def_bool y
> +       depends on ARCH_MULTI_V4_V5
>  

This is good, but I'd also suggest using specific dependencies on the
architecture level (V4, V4T, V5, V6, V6K, V7). For the other platforms
in the Rob's multiplatform series, this is not an issue because each
of them only works on exactly one architecture level.

For i.MX and other platforms that us a bunch of different CPU cores,
I think it's helpful if you can limit the configuration to a specific
architecture level, because that can result in a slightly more
efficient kernel binary. E.g. when you want to build a THUMB2 based
kernel, you can start by enabling only ARMv7 CPUs, and then select all
the board configurations without having to know which ones are actually
V6 or V7.

Doing this will require another update to the defconfig file, in addition
to the one mentioned by Sascha.

	Arnd
diff mbox

Patch

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1d73bbc..afcd466 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -420,19 +420,6 @@  config ARCH_FOOTBRIDGE
 	  Support for systems based on the DC21285 companion chip
 	  ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
 
-config ARCH_MXC
-	bool "Freescale MXC/iMX-based"
-	select GENERIC_CLOCKEVENTS
-	select ARCH_REQUIRE_GPIOLIB
-	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
-	select GENERIC_IRQ_CHIP
-	select MULTI_IRQ_HANDLER
-	select SPARSE_IRQ
-	select USE_OF
-	help
-	  Support for Freescale MXC/iMX-based family of processors
-
 config ARCH_MXS
 	bool "Freescale MXS-based"
 	select GENERIC_CLOCKEVENTS
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index b8f0f7d..e6a5764 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,4 +1,20 @@ 
-if ARCH_MXC
+config ARCH_MXC
+	def_bool y if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7
+	select AUTO_ZRELADDR if !ZBOOT_ROM
+	select ARM_PATCH_PHYS_VIRT
+	select GENERIC_CLOCKEVENTS
+	select ARCH_REQUIRE_GPIOLIB
+	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
+	select GENERIC_IRQ_CHIP
+	select MULTI_IRQ_HANDLER
+	select SPARSE_IRQ
+	select USE_OF
+	help
+	  Support for Freescale MXC/iMX-based family of processors
+
+menu "Freescale i.MX support"
+	depends on ARCH_MXC
 
 config MXC_IRQ_PRIOR
 	bool "Use IRQ priority"
@@ -161,19 +177,9 @@  config	SOC_IMX51
 	select PINCTRL
 	select PINCTRL_IMX51
 
-menu "Freescale MXC Implementations"
-
-choice
-	prompt "Freescale CPU family:"
-	default ARCH_IMX_V6_V7
-
 config ARCH_IMX_V4_V5
-	bool "i.MX1, i.MX21, i.MX25, i.MX27"
-	select AUTO_ZRELADDR if !ZBOOT_ROM
-	select ARM_PATCH_PHYS_VIRT
-	help
-	  This enables support for systems based on the Freescale i.MX ARMv4
-	  and ARMv5 SoCs
+	def_bool y
+	depends on ARCH_MULTI_V4_V5
 
 if ARCH_IMX_V4_V5
 
@@ -456,13 +462,9 @@  config MACH_IMX27_DT
 endif
 
 config ARCH_IMX_V6_V7
-	bool "i.MX3, i.MX5, i.MX6"
-	select AUTO_ZRELADDR if !ZBOOT_ROM
-	select ARM_PATCH_PHYS_VIRT
+	def_bool y
+	depends on ARCH_MULTI_V6_V7
 	select MIGHT_HAVE_CACHE_L2X0
-	help
-	  This enables support for systems based on the Freescale i.MX3, i.MX5
-	  and i.MX6 family.
 
 if ARCH_IMX_V6_V7
 
@@ -847,10 +849,6 @@  config SOC_IMX6Q
 
 endif
 
-endchoice
-
-endmenu
-
 source "arch/arm/mach-imx/devices/Kconfig"
 
-endif
+endmenu
diff --git a/arch/arm/mach-imx/include/mach/timex.h b/arch/arm/mach-imx/include/mach/timex.h
deleted file mode 100644
index 10343d1..0000000
--- a/arch/arm/mach-imx/include/mach/timex.h
+++ /dev/null
@@ -1,22 +0,0 @@ 
-/*
- *  Copyright (C) 1999 ARM Limited
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MXC_TIMEX_H__
-#define __ASM_ARCH_MXC_TIMEX_H__
-
-/* Bogus value */
-#define CLOCK_TICK_RATE	12345678
-
-#endif				/* __ASM_ARCH_MXC_TIMEX_H__ */
diff --git a/arch/arm/mach-imx/include/mach/uncompress.h b/arch/arm/mach-imx/include/mach/uncompress.h
deleted file mode 100644
index 477971b..0000000
--- a/arch/arm/mach-imx/include/mach/uncompress.h
+++ /dev/null
@@ -1,132 +0,0 @@ 
-/*
- *  arch/arm/plat-mxc/include/mach/uncompress.h
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#ifndef __ASM_ARCH_MXC_UNCOMPRESS_H__
-#define __ASM_ARCH_MXC_UNCOMPRESS_H__
-
-#define __MXC_BOOT_UNCOMPRESS
-
-#include <asm/mach-types.h>
-
-unsigned long uart_base;
-
-#define UART(x) (*(volatile unsigned long *)(uart_base + (x)))
-
-#define USR2 0x98
-#define USR2_TXFE (1<<14)
-#define TXR  0x40
-#define UCR1 0x80
-#define UCR1_UARTEN 1
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader.  We search for the first enabled
- * port in the most probable order.  If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- *
- * This does not append a newline
- */
-
-static void putc(int ch)
-{
-	if (!uart_base)
-		return;
-	if (!(UART(UCR1) & UCR1_UARTEN))
-		return;
-
-	while (!(UART(USR2) & USR2_TXFE))
-		barrier();
-
-	UART(TXR) = ch;
-}
-
-static inline void flush(void)
-{
-}
-
-#define MX1_UART1_BASE_ADDR	0x00206000
-#define MX25_UART1_BASE_ADDR	0x43f90000
-#define MX2X_UART1_BASE_ADDR	0x1000a000
-#define MX3X_UART1_BASE_ADDR	0x43F90000
-#define MX3X_UART2_BASE_ADDR	0x43F94000
-#define MX3X_UART5_BASE_ADDR	0x43FB4000
-#define MX51_UART1_BASE_ADDR	0x73fbc000
-#define MX50_UART1_BASE_ADDR	0x53fbc000
-#define MX53_UART1_BASE_ADDR	0x53fbc000
-
-static __inline__ void __arch_decomp_setup(unsigned long arch_id)
-{
-	switch (arch_id) {
-	case MACH_TYPE_MX1ADS:
-	case MACH_TYPE_SCB9328:
-		uart_base = MX1_UART1_BASE_ADDR;
-		break;
-	case MACH_TYPE_MX25_3DS:
-		uart_base = MX25_UART1_BASE_ADDR;
-		break;
-	case MACH_TYPE_IMX27LITE:
-	case MACH_TYPE_MX27_3DS:
-	case MACH_TYPE_MX27ADS:
-	case MACH_TYPE_PCM038:
-	case MACH_TYPE_MX21ADS:
-	case MACH_TYPE_PCA100:
-	case MACH_TYPE_MXT_TD60:
-	case MACH_TYPE_IMX27IPCAM:
-		uart_base = MX2X_UART1_BASE_ADDR;
-		break;
-	case MACH_TYPE_MX31LITE:
-	case MACH_TYPE_ARMADILLO5X0:
-	case MACH_TYPE_MX31MOBOARD:
-	case MACH_TYPE_QONG:
-	case MACH_TYPE_MX31_3DS:
-	case MACH_TYPE_PCM037:
-	case MACH_TYPE_MX31ADS:
-	case MACH_TYPE_MX35_3DS:
-	case MACH_TYPE_PCM043:
-	case MACH_TYPE_LILLY1131:
-	case MACH_TYPE_VPR200:
-	case MACH_TYPE_EUKREA_CPUIMX35SD:
-		uart_base = MX3X_UART1_BASE_ADDR;
-		break;
-	case MACH_TYPE_MAGX_ZN5:
-		uart_base = MX3X_UART2_BASE_ADDR;
-		break;
-	case MACH_TYPE_BUG:
-		uart_base = MX3X_UART5_BASE_ADDR;
-		break;
-	case MACH_TYPE_MX51_BABBAGE:
-	case MACH_TYPE_EUKREA_CPUIMX51SD:
-	case MACH_TYPE_MX51_3DS:
-		uart_base = MX51_UART1_BASE_ADDR;
-		break;
-	case MACH_TYPE_MX50_RDP:
-		uart_base = MX50_UART1_BASE_ADDR;
-		break;
-	case MACH_TYPE_MX53_EVK:
-	case MACH_TYPE_MX53_LOCO:
-	case MACH_TYPE_MX53_SMD:
-	case MACH_TYPE_MX53_ARD:
-		uart_base = MX53_UART1_BASE_ADDR;
-		break;
-	default:
-		break;
-	}
-}
-
-#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
-#define arch_decomp_wdog()
-
-#endif				/* __ASM_ARCH_MXC_UNCOMPRESS_H__ */