From patchwork Wed Sep 27 14:18:18 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Damien Le Moal X-Patchwork-Id: 1840260 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@legolas.ozlabs.org Authentication-Results: legolas.ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=kernel.org header.i=@kernel.org header.a=rsa-sha256 header.s=k20201202 header.b=uYbo7k4k; dkim-atps=neutral Authentication-Results: legolas.ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=linux-ide-owner@vger.kernel.org; receiver=patchwork.ozlabs.org) Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by legolas.ozlabs.org (Postfix) with ESMTP id 4Rwdyy63CKz1yp0 for ; Thu, 28 Sep 2023 00:19:22 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232146AbjI0OTW (ORCPT ); Wed, 27 Sep 2023 10:19:22 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48966 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232143AbjI0OTA (ORCPT ); Wed, 27 Sep 2023 10:19:00 -0400 Received: from smtp.kernel.org (relay.kernel.org [52.25.139.140]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id A01211B6; Wed, 27 Sep 2023 07:18:53 -0700 (PDT) Received: by smtp.kernel.org (Postfix) with ESMTPSA id E645EC433C9; Wed, 27 Sep 2023 14:18:51 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1695824333; bh=PMj7iS+ODMTYln36IKNO/TS68wImEfCp7PAKE3VdLBg=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=uYbo7k4kutAIZxLjuMa6+Yc2tJj28j9O9t2h9crYF+1Y+sbR5wNIz1pjoDKHaluIO YbQRCDQAQ3ceKEYUOTUbhiLAqR/ueAhDiT2mYVh5bbbasFvJLTHp0AFLPsA/xkqT87 qZHREjoGIlNeMUy2lVYAsUnWMwL1KScNhmy8dBn6WInwF4NfF9d46GZyo9tgWx7xCX RyfvYdfgvOrB7f4iRqC9AZU8A74MgsYP4G3y1oYv6zypUou+F/zVSzhm4Cg1T3HNkY rKOx7qtFavGsozJTdR0fu8qo+b01vy3Za59FECs7CCrJXfpdbVuVFB8pqw073W27zs clZBytJSAgKEA== From: Damien Le Moal To: linux-ide@vger.kernel.org Cc: linux-scsi@vger.kernel.org, "Martin K . Petersen" , John Garry , Rodrigo Vivi , Paul Ausbeck , Kai-Heng Feng , Joe Breuer , Geert Uytterhoeven , Chia-Lin Kao Subject: [PATCH v8 13/23] ata: libata-scsi: Cleanup ata_scsi_start_stop_xlat() Date: Wed, 27 Sep 2023 23:18:18 +0900 Message-ID: <20230927141828.90288-14-dlemoal@kernel.org> X-Mailer: git-send-email 2.41.0 In-Reply-To: <20230927141828.90288-1-dlemoal@kernel.org> References: <20230927141828.90288-1-dlemoal@kernel.org> MIME-Version: 1.0 X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED,DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF, RCVD_IN_DNSWL_BLOCKED,SPF_HELO_NONE,SPF_PASS autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-ide@vger.kernel.org Now that libata does its own internal device power mode management through libata EH, the scsi disk driver will not issue START STOP UNIT commands anymore. We can receive this command only from user passthrough operations. So there is no need to consider the system state and ATA port flags for suspend to translate the command. Since setting up the taskfile for the verify and standby immediate commands is the same as done in ata_dev_power_set_active() and ata_dev_power_set_standby(), factor out this code into the helper function ata_dev_power_init_tf() to simplify ata_scsi_start_stop_xlat() as well as ata_dev_power_set_active() and ata_dev_power_set_standby(). Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke Tested-by: Chia-Lin Kao (AceLan) Tested-by: Geert Uytterhoeven Reviewed-by: Martin K. Petersen --- drivers/ata/libata-core.c | 55 +++++++++++++++++++++++---------------- drivers/ata/libata-scsi.c | 53 +++++++------------------------------ drivers/ata/libata.h | 2 ++ 3 files changed, 44 insertions(+), 66 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index d8cc1e27a125..8e326a445765 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -1972,6 +1972,35 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, return rc; } +bool ata_dev_power_init_tf(struct ata_device *dev, struct ata_taskfile *tf, + bool set_active) +{ + /* Only applies to ATA and ZAC devices */ + if (dev->class != ATA_DEV_ATA && dev->class != ATA_DEV_ZAC) + return false; + + ata_tf_init(dev, tf); + tf->flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR; + tf->protocol = ATA_PROT_NODATA; + + if (set_active) { + /* VERIFY for 1 sector at lba=0 */ + tf->command = ATA_CMD_VERIFY; + tf->nsect = 1; + if (dev->flags & ATA_DFLAG_LBA) { + tf->flags |= ATA_TFLAG_LBA; + tf->device |= ATA_LBA; + } else { + /* CHS */ + tf->lbal = 0x1; /* sect */ + } + } else { + tf->command = ATA_CMD_STANDBYNOW1; + } + + return true; +} + /** * ata_dev_power_set_standby - Set a device power mode to standby * @dev: target device @@ -1988,10 +2017,6 @@ void ata_dev_power_set_standby(struct ata_device *dev) struct ata_taskfile tf; unsigned int err_mask; - /* Issue STANDBY IMMEDIATE command only if supported by the device */ - if (dev->class != ATA_DEV_ATA && dev->class != ATA_DEV_ZAC) - return; - /* * Some odd clown BIOSes issue spindown on power off (ACPI S4 or S5) * causing some drives to spin up and down again. For these, do nothing @@ -2005,10 +2030,9 @@ void ata_dev_power_set_standby(struct ata_device *dev) system_entering_hibernation()) return; - ata_tf_init(dev, &tf); - tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR; - tf.protocol = ATA_PROT_NODATA; - tf.command = ATA_CMD_STANDBYNOW1; + /* Issue STANDBY IMMEDIATE command only if supported by the device */ + if (!ata_dev_power_init_tf(dev, &tf, false)) + return; ata_dev_notice(dev, "Entering standby power mode\n"); @@ -2038,22 +2062,9 @@ void ata_dev_power_set_active(struct ata_device *dev) * Issue READ VERIFY SECTORS command for 1 sector at lba=0 only * if supported by the device. */ - if (dev->class != ATA_DEV_ATA && dev->class != ATA_DEV_ZAC) + if (!ata_dev_power_init_tf(dev, &tf, true)) return; - ata_tf_init(dev, &tf); - tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR; - tf.protocol = ATA_PROT_NODATA; - tf.command = ATA_CMD_VERIFY; - tf.nsect = 1; - if (dev->flags & ATA_DFLAG_LBA) { - tf.flags |= ATA_TFLAG_LBA; - tf.device |= ATA_LBA; - } else { - /* CHS */ - tf.lbal = 0x1; /* sect */ - } - ata_dev_notice(dev, "Entering active power mode\n"); err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 6850cac803c1..d4e14d052b18 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -1202,7 +1202,6 @@ EXPORT_SYMBOL_GPL(ata_scsi_slave_destroy); static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc) { struct scsi_cmnd *scmd = qc->scsicmd; - struct ata_taskfile *tf = &qc->tf; const u8 *cdb = scmd->cmnd; u16 fp; u8 bp = 0xff; @@ -1212,54 +1211,24 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc) goto invalid_fld; } - tf->flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR; - tf->protocol = ATA_PROT_NODATA; - if (cdb[1] & 0x1) { - ; /* ignore IMMED bit, violates sat-r05 */ - } + /* LOEJ bit set not supported */ if (cdb[4] & 0x2) { fp = 4; bp = 1; - goto invalid_fld; /* LOEJ bit set not supported */ + goto invalid_fld; } + + /* Power conditions not supported */ if (((cdb[4] >> 4) & 0xf) != 0) { fp = 4; bp = 3; - goto invalid_fld; /* power conditions not supported */ + goto invalid_fld; } - if (cdb[4] & 0x1) { - tf->nsect = 1; /* 1 sector, lba=0 */ - - if (qc->dev->flags & ATA_DFLAG_LBA) { - tf->flags |= ATA_TFLAG_LBA; - - tf->lbah = 0x0; - tf->lbam = 0x0; - tf->lbal = 0x0; - tf->device |= ATA_LBA; - } else { - /* CHS */ - tf->lbal = 0x1; /* sect */ - tf->lbam = 0x0; /* cyl low */ - tf->lbah = 0x0; /* cyl high */ - } - - tf->command = ATA_CMD_VERIFY; /* READ VERIFY */ - } else { - /* Some odd clown BIOSen issue spindown on power off (ACPI S4 - * or S5) causing some drives to spin up and down again. - */ - if ((qc->ap->flags & ATA_FLAG_NO_POWEROFF_SPINDOWN) && - system_state == SYSTEM_POWER_OFF) - goto skip; - - if ((qc->ap->flags & ATA_FLAG_NO_HIBERNATE_SPINDOWN) && - system_entering_hibernation()) - goto skip; - - /* Issue ATA STANDBY IMMEDIATE command */ - tf->command = ATA_CMD_STANDBYNOW1; + /* Ignore IMMED bit (cdb[1] & 0x1), violates sat-r05 */ + if (!ata_dev_power_init_tf(qc->dev, &qc->tf, cdb[4] & 0x1)) { + ata_scsi_set_sense(qc->dev, scmd, ABORTED_COMMAND, 0, 0); + return 1; } /* @@ -1274,12 +1243,8 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc) invalid_fld: ata_scsi_set_invalid_field(qc->dev, scmd, fp, bp); return 1; - skip: - scmd->result = SAM_STAT_GOOD; - return 1; } - /** * ata_scsi_flush_xlat - Translate SCSI SYNCHRONIZE CACHE command * @qc: Storage for translated ATA taskfile diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index 05ac80da8ebc..5c685bb1939e 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -62,6 +62,8 @@ extern int ata_dev_reread_id(struct ata_device *dev, unsigned int readid_flags); extern int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class, unsigned int readid_flags); extern int ata_dev_configure(struct ata_device *dev); +extern bool ata_dev_power_init_tf(struct ata_device *dev, + struct ata_taskfile *tf, bool set_active); extern void ata_dev_power_set_standby(struct ata_device *dev); extern void ata_dev_power_set_active(struct ata_device *dev); extern int sata_down_spd_limit(struct ata_link *link, u32 spd_limit);