diff mbox series

[v5,17/23] dt-bindings: ata: ahci: Add DWC AHCI SATA controller DT schema

Message ID 20220713052917.27036-18-Sergey.Semin@baikalelectronics.ru
State New
Headers show
Series ata: ahci: Add DWC/Baikal-T1 AHCI SATA support | expand

Commit Message

Serge Semin July 13, 2022, 5:29 a.m. UTC
Synopsys AHCI SATA controller is mainly compatible with the generic AHCI
SATA controller except a few peculiarities and the platform environment
requirements. In particular it can have at least two reference clocks to
feed up its AHB/AXI interface and SATA PHYs domain and at least one reset
control for the application clock domain. In addition to that the DMA
interface of each port can be tuned up to work with the predefined maximum
data chunk size. Note unlike generic AHCI controller DWC AHCI can't have
more than 8 ports. All of that is reflected in the new DWC AHCI SATA
device DT binding.

Note the DWC AHCI SATA controller DT-schema has been created in a way so
to be reused for the vendor-specific DT-schemas (see for example the
"snps,dwc-ahci" compatible string binding). One of which we are about to
introduce.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>

---

Changelog v2:
- Replace min/max constraints of the snps,{tx,rx}-ts-max property with
  enum [ 1, 2, 4, ..., 1024 ]. (@Rob)

Changelog v4:
- Decrease the "additionalProperties" property identation otherwise it's
  percieved as the node property instead of the key one. (@Rob)
- Use the ahci-port properties definition from the AHCI common schema
  in order to extend it with DWC AHCI SATA port properties. (@Rob)
- Remove the Hannes' rb tag since the patch content has changed.

Changelog v5:
- Fix "resets" property description: replace "clocks" with "resets".
  (@Rob)
- Extend "resets/clocks{-names}" property definitions. (@Rob)
- Add "resets" property min/maxItems constraints. (@Rob)
- Add names for the basic resets like RxOOB and PM-alive. (@Rob)
- Add generic DWC AHCI SATA fallback for "rockchip,rk3568-dwc-ahci"
  bindings. (@Rob)
- Due to the change above the schema has been split up into two parts:
  common DWC AHCI SATA properties and generic DW AHCI SATA controller
  DT-schema. (@Rob)
---
 .../bindings/ata/ahci-platform.yaml           |   8 --
 .../bindings/ata/snps,dwc-ahci-common.yaml    | 102 ++++++++++++++++++
 .../bindings/ata/snps,dwc-ahci.yaml           |  75 +++++++++++++
 3 files changed, 177 insertions(+), 8 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml
 create mode 100644 Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml

Comments

Rob Herring July 18, 2022, 8:33 p.m. UTC | #1
On Wed, 13 Jul 2022 08:29:10 +0300, Serge Semin wrote:
> Synopsys AHCI SATA controller is mainly compatible with the generic AHCI
> SATA controller except a few peculiarities and the platform environment
> requirements. In particular it can have at least two reference clocks to
> feed up its AHB/AXI interface and SATA PHYs domain and at least one reset
> control for the application clock domain. In addition to that the DMA
> interface of each port can be tuned up to work with the predefined maximum
> data chunk size. Note unlike generic AHCI controller DWC AHCI can't have
> more than 8 ports. All of that is reflected in the new DWC AHCI SATA
> device DT binding.
> 
> Note the DWC AHCI SATA controller DT-schema has been created in a way so
> to be reused for the vendor-specific DT-schemas (see for example the
> "snps,dwc-ahci" compatible string binding). One of which we are about to
> introduce.
> 
> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> 
> ---
> 
> Changelog v2:
> - Replace min/max constraints of the snps,{tx,rx}-ts-max property with
>   enum [ 1, 2, 4, ..., 1024 ]. (@Rob)
> 
> Changelog v4:
> - Decrease the "additionalProperties" property identation otherwise it's
>   percieved as the node property instead of the key one. (@Rob)
> - Use the ahci-port properties definition from the AHCI common schema
>   in order to extend it with DWC AHCI SATA port properties. (@Rob)
> - Remove the Hannes' rb tag since the patch content has changed.
> 
> Changelog v5:
> - Fix "resets" property description: replace "clocks" with "resets".
>   (@Rob)
> - Extend "resets/clocks{-names}" property definitions. (@Rob)
> - Add "resets" property min/maxItems constraints. (@Rob)
> - Add names for the basic resets like RxOOB and PM-alive. (@Rob)
> - Add generic DWC AHCI SATA fallback for "rockchip,rk3568-dwc-ahci"
>   bindings. (@Rob)
> - Due to the change above the schema has been split up into two parts:
>   common DWC AHCI SATA properties and generic DW AHCI SATA controller
>   DT-schema. (@Rob)
> ---
>  .../bindings/ata/ahci-platform.yaml           |   8 --
>  .../bindings/ata/snps,dwc-ahci-common.yaml    | 102 ++++++++++++++++++
>  .../bindings/ata/snps,dwc-ahci.yaml           |  75 +++++++++++++
>  3 files changed, 177 insertions(+), 8 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml
>  create mode 100644 Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.yaml b/Documentation/devicetree/bindings/ata/ahci-platform.yaml
index e19cf9828e68..7dc2a2e8f598 100644
--- a/Documentation/devicetree/bindings/ata/ahci-platform.yaml
+++ b/Documentation/devicetree/bindings/ata/ahci-platform.yaml
@@ -30,8 +30,6 @@  select:
           - marvell,armada-3700-ahci
           - marvell,armada-8k-ahci
           - marvell,berlin2q-ahci
-          - snps,dwc-ahci
-          - snps,spear-ahci
   required:
     - compatible
 
@@ -48,17 +46,11 @@  properties:
               - marvell,berlin2-ahci
               - marvell,berlin2q-ahci
           - const: generic-ahci
-      - items:
-          - enum:
-              - rockchip,rk3568-dwc-ahci
-          - const: snps,dwc-ahci
       - enum:
           - cavium,octeon-7130-ahci
           - hisilicon,hisi-ahci
           - ibm,476gtr-ahci
           - marvell,armada-3700-ahci
-          - snps,dwc-ahci
-          - snps,spear-ahci
 
   reg:
     minItems: 1
diff --git a/Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml b/Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml
new file mode 100644
index 000000000000..c1457910520b
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml
@@ -0,0 +1,102 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/snps,dwc-ahci-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DWC AHCI SATA controller properties
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description:
+  This document defines device tree schema for the generic Synopsys DWC
+  AHCI controller properties.
+
+select: false
+
+allOf:
+  - $ref: ahci-common.yaml#
+
+properties:
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description:
+      Basic DWC AHCI SATA clock sources like application AXI/AHB BIU clock,
+      PM-alive clock, RxOOB detection clock, embedded PHYs reference (Rx/Tx)
+      clock, etc.
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+    items:
+      oneOf:
+        - description: Application APB/AHB/AXI BIU clock
+          enum:
+            - pclk
+            - aclk
+            - hclk
+            - sata
+        - description: Power Module keep-alive clock
+          const: pmalive
+        - description: RxOOB detection clock
+          const: rxoob
+        - description: SATA Ports reference clock
+          const: ref
+
+  resets:
+    description:
+      At least basic application and reference clock domains resets are
+      normally supported by the DWC AHCI SATA controller.
+    minItems: 1
+    maxItems: 4
+
+  reset-names:
+    minItems: 1
+    maxItems: 4
+    items:
+      oneOf:
+        - description: Application AHB/AXI BIU clock domain reset control
+          enum:
+            - arst
+            - hrst
+        - description: Power Module keep-alive clock domain reset control
+          const: pmalive
+        - description: RxOOB detection clock domain reset control
+          const: rxoob
+        - description: Reference clock domain reset control
+          const: ref
+
+patternProperties:
+  "^sata-port@[0-9a-e]$":
+    $ref: '#/$defs/dwc-ahci-port'
+
+additionalProperties: true
+
+$defs:
+  dwc-ahci-port:
+    $ref: /schemas/ata/ahci-common.yaml#/$defs/ahci-port
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 7
+
+      snps,tx-ts-max:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: Maximal size of Tx DMA transactions in FIFO words
+        enum: [ 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024 ]
+
+      snps,rx-ts-max:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: Maximal size of Rx DMA transactions in FIFO words
+        enum: [ 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024 ]
+
+...
diff --git a/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml b/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml
new file mode 100644
index 000000000000..5afa4b57ce20
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml
@@ -0,0 +1,75 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/snps,dwc-ahci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DWC AHCI SATA controller
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description:
+  This document defines device tree bindings for the generic Synopsys DWC
+  implementation of the AHCI SATA controller.
+
+allOf:
+  - $ref: snps,dwc-ahci-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - description: Synopsys AHCI SATA-compatible devices
+        const: snps,dwc-ahci
+      - description: SPEAr1340 AHCI SATA device
+        const: snps,spear-ahci
+      - description: Rockhip RK3568 AHCI controller
+        items:
+          - const: rockchip,rk3568-dwc-ahci
+          - const: snps,dwc-ahci
+
+patternProperties:
+  "^sata-port@[0-9a-e]$":
+    $ref: /schemas/ata/snps,dwc-ahci-common.yaml#/$defs/dwc-ahci-port
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/ata/ahci.h>
+
+    sata@122f0000 {
+      compatible = "snps,dwc-ahci";
+      reg = <0x122F0000 0x1ff>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+
+      clocks = <&clock1>, <&clock2>;
+      clock-names = "aclk", "ref";
+
+      phys = <&sata_phy>;
+      phy-names = "sata-phy";
+
+      ports-implemented = <0x1>;
+
+      sata-port@0 {
+        reg = <0>;
+
+        hba-port-cap = <HBA_PORT_FBSCP>;
+
+        snps,tx-ts-max = <512>;
+        snps,rx-ts-max = <512>;
+      };
+    };
+
+...