@@ -165,3 +165,14 @@ config PATA_PARPORT_KTTI
support into your kernel, you may answer Y here to build in the
protocol driver, otherwise you should answer M to build it as a
loadable module. The module will be called ktti.
+
+config PATA_PARPORT_ON20
+ tristate "OnSpec 90c20 protocol"
+ depends on PATA_PARPORT
+ help
+ This option enables support for the (obsolete) 90c20 parallel port
+ IDE protocol from OnSpec (often marketed under the ValuStore brand
+ name). If you chose to build PATA_PARPORT support into your kernel, you
+ may answer Y here to build in the protocol driver, otherwise you
+ should answer M to build it as a loadable module.The module will
+ be called on20.
@@ -20,3 +20,4 @@ obj-$(CONFIG_PATA_PARPORT_FRIQ) += friq.o
obj-$(CONFIG_PATA_PARPORT_FRPW) += frpw.o
obj-$(CONFIG_PATA_PARPORT_KBIC) += kbic.o
obj-$(CONFIG_PATA_PARPORT_KTTI) += ktti.o
+obj-$(CONFIG_PATA_PARPORT_ON20) += on20.o
new file mode 100644
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * on20.c (c) 1996-8 Grant R. Guenther <grant@torque.net>
+ * Under the terms of the GNU General Public License.
+ *
+ * on20.c is a low-level protocol driver for the
+ * Onspec 90c20 parallel to IDE adapter.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <linux/io.h>
+
+#include "pata_parport.h"
+
+#define op(f) do { w2(4); w0(f); w2(5); w2(0xd); w2(5); w2(0xd); w2(5); w2(4); } while (0)
+#define vl(v) do { w2(4); w0(v); w2(5); w2(7); w2(5); w2(4); } while (0)
+
+#define j44(a, b) (((a >> 4) & 0x0f) | (b & 0xf0))
+
+/* cont = 0 - access the IDE register file
+ * cont = 1 - access the IDE command set
+ */
+
+static int on20_read_regr(struct pi_adapter *pi, int cont, int regr)
+{
+ int h, l, r;
+
+ r = (regr << 2) + 1 + cont;
+
+ op(1); vl(r); op(0);
+
+ switch (pi->mode) {
+ case 0:
+ w2(4); w2(6); l = r1();
+ w2(4); w2(6); h = r1();
+ w2(4); w2(6); w2(4); w2(6); w2(4);
+ return j44(l, h);
+ case 1:
+ w2(4); w2(0x26); r = r0();
+ w2(4); w2(0x26); w2(4);
+ return r;
+
+ }
+ return -1;
+}
+
+static void on20_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
+{
+ int r = (regr << 2) + 1 + cont;
+
+ op(1); vl(r);
+ op(0); vl(val);
+ op(0); vl(val);
+}
+
+static void on20_connect(struct pi_adapter *pi)
+{
+ pi->saved_r0 = r0();
+ pi->saved_r2 = r2();
+
+ w2(4); w0(0); w2(0xc); w2(4); w2(6); w2(4); w2(6); w2(4);
+ if (pi->mode) {
+ op(2); vl(8); op(2); vl(9);
+ } else {
+ op(2); vl(0); op(2); vl(8);
+ }
+}
+
+static void on20_disconnect(struct pi_adapter *pi)
+{
+ w2(4); w0(7); w2(4); w2(0xc); w2(4);
+ w0(pi->saved_r0);
+ w2(pi->saved_r2);
+}
+
+static void on20_read_block(struct pi_adapter *pi, char *buf, int count)
+{
+ int k, l, h;
+
+ op(1); vl(1); op(0);
+
+ for (k = 0; k < count; k++)
+ if (pi->mode) {
+ w2(4); w2(0x26); buf[k] = r0();
+ } else {
+ w2(6); l = r1(); w2(4);
+ w2(6); h = r1(); w2(4);
+ buf[k] = j44(l, h);
+ }
+ w2(4);
+}
+
+static void on20_write_block(struct pi_adapter *pi, char *buf, int count)
+{
+ int k;
+
+ op(1); vl(1); op(0);
+
+ for (k = 0; k < count; k++) {
+ w2(5); w0(buf[k]); w2(7);
+ }
+ w2(4);
+}
+
+static void on20_log_adapter(struct pi_adapter *pi, char *scratch, int verbose)
+{
+ static char * const mode_string[] = { "4-bit", "8-bit" };
+
+ dev_info(&pi->dev, "on20, OnSpec 90c20 at 0x%x, mode %d (%s), delay %d\n",
+ pi->port, pi->mode, mode_string[pi->mode], pi->delay);
+}
+
+static struct pi_protocol on20 = {
+ .owner = THIS_MODULE,
+ .name = "on20",
+ .max_mode = 2,
+ .epp_first = 2,
+ .default_delay = 1,
+ .max_units = 1,
+ .write_regr = on20_write_regr,
+ .read_regr = on20_read_regr,
+ .write_block = on20_write_block,
+ .read_block = on20_read_block,
+ .connect = on20_connect,
+ .disconnect = on20_disconnect,
+ .log_adapter = on20_log_adapter,
+ .sht = { PATA_PARPORT_SHT("pata_parport-on20") },
+};
+
+MODULE_LICENSE("GPL");
+module_pata_parport_driver(on20);
Add OnSpec 90c20 protocol driver. Signed-off-by: Ondrej Zary <linux@zary.sk> --- drivers/ata/pata_parport/Kconfig | 11 +++ drivers/ata/pata_parport/Makefile | 1 + drivers/ata/pata_parport/on20.c | 136 ++++++++++++++++++++++++++++++ 3 files changed, 148 insertions(+) create mode 100644 drivers/ata/pata_parport/on20.c