diff mbox

ide: silence some underflow warnings

Message ID 20151113143401.GC1445@mwanda
State Accepted
Delegated to: David Miller
Headers show

Commit Message

Dan Carpenter Nov. 13, 2015, 2:34 p.m. UTC
Back in the day we used to just say this code was root only so it was
ok that the bounds checking was sloppy.  These days it annoys static
checkers so we fix it.

In the original code "c > INT_MAX" was never true since "c" was an int.
I am not sure what was intended so I left it alone.  But because I made
"c" unsigned it means we don't have a warning any more.

The second warning is that we cap "i" but allow negatives leading to an
underflow of the ide_disks_chs[] array.  The third set of warnings is
because these values come from the user and we cap most of the upper
bounds but allow negative values.  Negative cylinders doesn't make
sense.

drivers/ide/ide.c:262 ide_set_disk_chs() warn: impossible condition '(c > ((~0 >> 1))) => (s32min-s32max > s32max)'
drivers/ide/ide.c:270 ide_set_disk_chs() warn: check 'ide_disks_chs[i]' for negative offsets 'i' = s32min.  extra = 's32min-19'
drivers/ide/ide.c:271 ide_set_disk_chs() warn: no lower bound on 'h'

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>

--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

David Miller Jan. 18, 2016, 7:12 p.m. UTC | #1
From: Dan Carpenter <dan.carpenter@oracle.com>
Date: Fri, 13 Nov 2015 17:34:01 +0300

> Back in the day we used to just say this code was root only so it was
> ok that the bounds checking was sloppy.  These days it annoys static
> checkers so we fix it.
> 
> In the original code "c > INT_MAX" was never true since "c" was an int.
> I am not sure what was intended so I left it alone.  But because I made
> "c" unsigned it means we don't have a warning any more.
> 
> The second warning is that we cap "i" but allow negatives leading to an
> underflow of the ide_disks_chs[] array.  The third set of warnings is
> because these values come from the user and we cap most of the upper
> bounds but allow negative values.  Negative cylinders doesn't make
> sense.
> 
> drivers/ide/ide.c:262 ide_set_disk_chs() warn: impossible condition '(c > ((~0 >> 1))) => (s32min-s32max > s32max)'
> drivers/ide/ide.c:270 ide_set_disk_chs() warn: check 'ide_disks_chs[i]' for negative offsets 'i' = s32min.  extra = 's32min-19'
> drivers/ide/ide.c:271 ide_set_disk_chs() warn: no lower bound on 'h'
> 
> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>

Applied.
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index f086ef3..d127ace 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -178,17 +178,17 @@  MODULE_PARM_DESC(pci_clock, "PCI bus clock frequency (in MHz)");
 
 static int ide_set_dev_param_mask(const char *s, const struct kernel_param *kp)
 {
-	int a, b, i, j = 1;
+	unsigned int a, b, i, j = 1;
 	unsigned int *dev_param_mask = (unsigned int *)kp->arg;
 
 	/* controller . device (0 or 1) [ : 1 (set) | 0 (clear) ] */
-	if (sscanf(s, "%d.%d:%d", &a, &b, &j) != 3 &&
-	    sscanf(s, "%d.%d", &a, &b) != 2)
+	if (sscanf(s, "%u.%u:%u", &a, &b, &j) != 3 &&
+	    sscanf(s, "%u.%u", &a, &b) != 2)
 		return -EINVAL;
 
 	i = a * MAX_DRIVES + b;
 
-	if (i >= MAX_HWIFS * MAX_DRIVES || j < 0 || j > 1)
+	if (i >= MAX_HWIFS * MAX_DRIVES || j > 1)
 		return -EINVAL;
 
 	if (j)
@@ -246,17 +246,17 @@  static struct chs_geom ide_disks_chs[MAX_HWIFS * MAX_DRIVES];
 
 static int ide_set_disk_chs(const char *str, struct kernel_param *kp)
 {
-	int a, b, c = 0, h = 0, s = 0, i, j = 1;
+	unsigned int a, b, c = 0, h = 0, s = 0, i, j = 1;
 
 	/* controller . device (0 or 1) : Cylinders , Heads , Sectors */
 	/* controller . device (0 or 1) : 1 (use CHS) | 0 (ignore CHS) */
-	if (sscanf(str, "%d.%d:%d,%d,%d", &a, &b, &c, &h, &s) != 5 &&
-	    sscanf(str, "%d.%d:%d", &a, &b, &j) != 3)
+	if (sscanf(str, "%u.%u:%u,%u,%u", &a, &b, &c, &h, &s) != 5 &&
+	    sscanf(str, "%u.%u:%u", &a, &b, &j) != 3)
 		return -EINVAL;
 
 	i = a * MAX_DRIVES + b;
 
-	if (i >= MAX_HWIFS * MAX_DRIVES || j < 0 || j > 1)
+	if (i >= MAX_HWIFS * MAX_DRIVES || j > 1)
 		return -EINVAL;
 
 	if (c > INT_MAX || h > 255 || s > 255)