diff mbox

[2/2,v2] pata_hpt{37x|3x2n}: use pr_*(DRV_NAME ...) instead of printk(KERN_* ...)

Message ID 201101082305.30245.sshtylyov@ru.mvista.com
State Not Applicable
Delegated to: David Miller
Headers show

Commit Message

Sergei Shtylyov Jan. 8, 2011, 8:05 p.m. UTC 
... the same as the 'pata_hpt366' driver does.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>

---
The patch is against the recent Linus' tree plus the patches that Jeff has
already applied -- except the one I have re-posted today:

http://marc.info/?l=linux-ide&m=129450258305309

Changes from the previous version:
- fixed the silly typo (DVR_NAME)...

 drivers/ata/pata_hpt37x.c  |   29 +++++++++++++----------------
 drivers/ata/pata_hpt3x2n.c |   12 +++++-------
 2 files changed, 18 insertions(+), 23 deletions(-)

--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

Index: linux-2.6/drivers/ata/pata_hpt37x.c
===================================================================
--- linux-2.6.orig/drivers/ata/pata_hpt37x.c
+++ linux-2.6/drivers/ata/pata_hpt37x.c
@@ -24,7 +24,7 @@ 
 #include <linux/libata.h>
 
 #define DRV_NAME	"pata_hpt37x"
-#define DRV_VERSION	"0.6.18"
+#define DRV_VERSION	"0.6.19"
 
 struct hpt_clock {
 	u8	xfer_speed;
@@ -229,9 +229,8 @@  static int hpt_dma_blacklisted(const str
 
 	while (list[i] != NULL) {
 		if (!strcmp(list[i], model_num)) {
-			printk(KERN_WARNING DRV_NAME
-				": %s is not supported for %s.\n",
-				modestr, list[i]);
+			pr_warning(DRV_NAME ": %s is not supported for %s.\n",
+				   modestr, list[i]);
 			return 1;
 		}
 		i++;
@@ -864,7 +863,7 @@  static int hpt37x_init_one(struct pci_de
 			chip_table = &hpt372;
 			break;
 		default:
-			printk(KERN_ERR "pata_hpt37x: Unknown HPT366 subtype, "
+			pr_err(DRV_NAME ": Unknown HPT366 subtype, "
 			       "please report (%d).\n", rev);
 			return -ENODEV;
 		}
@@ -907,8 +906,8 @@  static int hpt37x_init_one(struct pci_de
 				*ppi = &info_hpt374_fn1;
 			break;
 		default:
-			printk(KERN_ERR
-			       "pata_hpt37x: PCI table is bogus, please report (%d).\n",
+			pr_err(DRV_NAME
+			       ": PCI table is bogus, please report (%d).\n",
 			       dev->device);
 				return -ENODEV;
 		}
@@ -958,8 +957,7 @@  static int hpt37x_init_one(struct pci_de
 		u8 sr;
 		u32 total = 0;
 
-		printk(KERN_WARNING
-		       "pata_hpt37x: BIOS has not set timing clocks.\n");
+		pr_warning(DRV_NAME ": BIOS has not set timing clocks.\n");
 
 		/* This is the process the HPT371 BIOS is reported to use */
 		for (i = 0; i < 128; i++) {
@@ -1015,8 +1013,7 @@  static int hpt37x_init_one(struct pci_de
 					       (f_high << 16) | f_low | 0x100);
 		}
 		if (adjust == 8) {
-			printk(KERN_ERR
-			       "pata_hpt37x: DPLL did not stabilize!\n");
+			pr_err(DRV_NAME ": DPLL did not stabilize!\n");
 			return -ENODEV;
 		}
 		if (dpll == 3)
@@ -1024,9 +1021,8 @@  static int hpt37x_init_one(struct pci_de
 		else
 			private_data = (void *)hpt37x_timings_50;
 
-		printk(KERN_INFO
-		       "pata_hpt37x: bus clock %dMHz, using %dMHz DPLL.\n",
-		       MHz[clock_slot], MHz[dpll]);
+		pr_info(DRV_NAME ": bus clock %dMHz, using %dMHz DPLL.\n",
+			MHz[clock_slot], MHz[dpll]);
 	} else {
 		private_data = (void *)chip_table->clocks[clock_slot];
 		/*
@@ -1039,8 +1035,9 @@  static int hpt37x_init_one(struct pci_de
 			ppi[0] = &info_hpt370_33;
 		if (clock_slot < 2 && ppi[0] == &info_hpt370a)
 			ppi[0] = &info_hpt370a_33;
-		printk(KERN_INFO "pata_hpt37x: %s using %dMHz bus clock.\n",
-		       chip_table->name, MHz[clock_slot]);
+
+		pr_info(DRV_NAME ": %s using %dMHz bus clock.\n",
+			chip_table->name, MHz[clock_slot]);
 	}
 
 	/* Now kick off ATA set up */
Index: linux-2.6/drivers/ata/pata_hpt3x2n.c
===================================================================
--- linux-2.6.orig/drivers/ata/pata_hpt3x2n.c
+++ linux-2.6/drivers/ata/pata_hpt3x2n.c
@@ -25,7 +25,7 @@ 
 #include <linux/libata.h>
 
 #define DRV_NAME	"pata_hpt3x2n"
-#define DRV_VERSION	"0.3.13"
+#define DRV_VERSION	"0.3.14"
 
 enum {
 	HPT_PCI_FAST	=	(1 << 31),
@@ -418,7 +418,7 @@  static int hpt3x2n_pci_clock(struct pci_
 		u16 sr;
 		u32 total = 0;
 
-		printk(KERN_WARNING "pata_hpt3x2n: BIOS clock data not set.\n");
+		pr_warning(DRV_NAME ": BIOS clock data not set.\n");
 
 		/* This is the process the HPT371 BIOS is reported to use */
 		for (i = 0; i < 128; i++) {
@@ -528,8 +528,7 @@  hpt372n:
 		ppi[0] = &info_hpt372n;
 		break;
 	default:
-		printk(KERN_ERR
-		       "pata_hpt3x2n: PCI table is bogus please report (%d).\n",
+		pr_err(DRV_NAME ": PCI table is bogus, please report (%d).\n",
 		       dev->device);
 		return -ENODEV;
 	}
@@ -579,12 +578,11 @@  hpt372n:
 		pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low);
 	}
 	if (adjust == 8) {
-		printk(KERN_ERR "pata_hpt3x2n: DPLL did not stabilize!\n");
+		pr_err(DRV_NAME ": DPLL did not stabilize!\n");
 		return -ENODEV;
 	}
 
-	printk(KERN_INFO "pata_hpt37x: bus clock %dMHz, using 66MHz DPLL.\n",
-	       pci_mhz);
+	pr_info(DRV_NAME ": bus clock %dMHz, using 66MHz DPLL.\n", pci_mhz);
 
 	/*
 	 * Set our private data up. We only need a few flags