===================================================================
@@ -113,6 +113,7 @@ enum {
board_ahci_mcp65 = 6,
board_ahci_nopmp = 7,
board_ahci_yesncq = 8,
+ board_ahci_nosntf = 9,
/* global controller registers */
HOST_CAP = 0x00, /* host capabilities */
@@ -235,6 +236,7 @@ enum {
AHCI_HFLAG_NO_SUSPEND = (1 << 10), /* don't suspend */
AHCI_HFLAG_SRST_TOUT_IS_OFFLINE = (1 << 11), /* treat SRST timeout as
link offline */
+ AHCI_HFLAG_NO_SNTF = (1 << 12), /* no sntf */
/* ap->flags bits */
@@ -508,7 +510,7 @@ static const struct ata_port_info ahci_p
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_ops,
},
- /* board_ahci_yesncq */
+ [board_ahci_yesncq] =
{
AHCI_HFLAGS (AHCI_HFLAG_YES_NCQ),
.flags = AHCI_FLAG_COMMON,
@@ -516,6 +518,14 @@ static const struct ata_port_info ahci_p
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_ops,
},
+ [board_ahci_nosntf] =
+ {
+ AHCI_HFLAGS (AHCI_HFLAG_NO_SNTF),
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_ops,
+ },
};
static const struct pci_device_id ahci_pci_tbl[] = {
@@ -531,7 +541,7 @@ static const struct pci_device_id ahci_p
{ PCI_VDEVICE(INTEL, 0x2683), board_ahci }, /* ESB2 */
{ PCI_VDEVICE(INTEL, 0x27c6), board_ahci }, /* ICH7-M DH */
{ PCI_VDEVICE(INTEL, 0x2821), board_ahci }, /* ICH8 */
- { PCI_VDEVICE(INTEL, 0x2822), board_ahci }, /* ICH8 */
+ { PCI_VDEVICE(INTEL, 0x2822), board_ahci_nosntf }, /* ICH8 */
{ PCI_VDEVICE(INTEL, 0x2824), board_ahci }, /* ICH8 */
{ PCI_VDEVICE(INTEL, 0x2829), board_ahci }, /* ICH8M */
{ PCI_VDEVICE(INTEL, 0x282a), board_ahci }, /* ICH8M */
@@ -849,6 +859,12 @@ static void ahci_save_initial_config(str
cap &= ~HOST_CAP_PMP;
}
+ if ((cap & HOST_CAP_SNTF) && (hpriv->flags & AHCI_HFLAG_NO_SNTF)) {
+ dev_printk(KERN_INFO, &pdev->dev,
+ "controller can't do SNTF, turning off CAP_SNTF\n");
+ cap &= ~HOST_CAP_SNTF;
+ }
+
if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361 &&
port_map != 1) {
dev_printk(KERN_INFO, &pdev->dev,
I obseved there is a sata_async_notification() for every ahci interrupt. But the async notification does nothing (this is hard disk drive and no pmp). This cause cpu wastes some time on sntf register access. It appears ICH AHCI doesn't support SNotification register, but the controller reports it does. After quirking it, the async notification disappears. PS. it appears all ICH don't support SNotification register from ICH manual, don't know if we need quirk all ICH. I don't have machines with all kinds of ICH. Signed-off-by: Shaohua Li <shaohua.li@intel.com> --- drivers/ata/ahci.c | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html