From patchwork Sat Apr 22 15:33:56 2017 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: mtths@nurfuerspam.de X-Patchwork-Id: 753782 X-Patchwork-Delegate: davem@davemloft.net Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 3w9GqQ5Z6Bz9s3s for ; Sun, 23 Apr 2017 01:34:10 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1424976AbdDVPeJ (ORCPT ); Sat, 22 Apr 2017 11:34:09 -0400 Received: from mout.gmx.net ([212.227.15.18]:54731 "EHLO mout.gmx.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1424956AbdDVPeC (ORCPT ); Sat, 22 Apr 2017 11:34:02 -0400 Received: from c21.localnet ([83.135.166.99]) by mail.gmx.com (mrgmx002 [212.227.17.190]) with ESMTPSA (Nemesis) id 0Lmr1w-1cNNVJ13ls-00h5uj for ; Sat, 22 Apr 2017 17:33:59 +0200 From: mtths@nurfuerspam.de To: linux-ide@vger.kernel.org Subject: PROBLEM: sil24: transfer errors causing data corruption or very low performance Date: Sat, 22 Apr 2017 17:33:56 +0200 Message-ID: <1605874.IPVSbxyx3P@c21> User-Agent: KMail/5.2.3 (Linux/4.9.18-sil24dma32; KDE/5.28.0; x86_64; ; ) MIME-Version: 1.0 X-Provags-ID: V03:K0:U9Im3/fiOtRDkQ240Ajac6wbRk2PVx4m+6api6IyyQJM1yi8482 ymAAekLu3oFgfSuU5G3Aw7GtuC2c9Hx+AUKm5Vs3snv2T4EVVOhDNewVIJ5TSGfb5ROCXVU wR3EPk59hTOd9sWGlN5JeHrvl6Nqcogbkt/Yv98CB5zh2ZOAg2ndJpgqZpCVp0F0CzSCB3J cCcLx74zEsKUItHCsgkeA== X-UI-Out-Filterresults: notjunk:1; V01:K0:cwd09NhZ66w=:YJPfJ8BQHIJwE++LrNzmrN 2OxYGz4JkAsmLY6uo7ifjL/w7Y4iyt5JWZaLBUmsykOFqKRs4TH0ap/0qpMDs4svubmBk5H90 SYXzeoJClbkAIQnoemn05ftMbhj+PdMP3VHlTOeVxMcCqQlsAD+buHWfkspc+lSgFzGZm0ePI od//pDVWDHvrhD7nzSmwPq0TQH1CYE6zy4nCJODh6qQatEbmwzjld5Zit6tY+PvwvUwdsZjyB gXRNgRT3NZxaVvSeA4nopVHIm+D4RoBey++/krpO/0wU0flIv73MjrFbTw13HYbrGPG4piPNn bx+2oMuEfOSzeFOqR7SwhwoyN/BkGsPMaL6j59hD0AEWnIMauVpbEZ3QuEaj7xw3ux3ZKxXmZ ntTH1QHcPw2IEg3dbHepsUskqmB05ZC8PYqhPf+hA2+DGLZdP51IKRdyaRFVX7n8m46xfjKHm nUssav5CDsNct98uF0TBiwNsz/AK3Fh62u4CIRUH2++JaYdM2NHo2XqBvAsLnmopJ69uU4APF zZhDawtHf0u31SjLdjPUgQPuWD+fTAffIrSPNgYV6CenMSZw0Ab62yT9/UeL+/6+Ij56GD6O5 euDwcnZY8hp05cLbdrkZRPSVY2LU+scEKq3ayOQdEE0Fv6FdBKmNxXEf+flJ82DAhvLRbgYht OBV8mcaj1y088Q2MCOAw+CEANZKrZ+vQl1MG/vdYdp0wIXecpn+6H0wAdxwzARfCpPvbuJRf+ QKO5DlET5fDzhlZxAXOCnjXlC10/9ylzcKHE5EJAsnO+TKAbnCifA5sqtpQ= Sender: linux-ide-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-ide@vger.kernel.org A SATA PCI-controller card using the kernel module sata_sil24 has problems transferring big files. First of all a description of the situation: -- Hardware: - mainboard Gigabyte GA-MA69GM-S2H; chipset AMD 690G / SB600; 2 PCI slots (32 bit); 1 PCIe 4x slot; 1 PCIe 16 x slot; 8 GiB RAM; AMD Phenom(tm) II X4 955 Processor - SATA controller card Dawicontrol DC-3410 RAID, 32 bit PCI; chipset SiI3124ACBHU; BIOS message: running at 32 bit / 33 MHz - with hard disks: HDS721616PLA380 (twice), ST3000DM001-9YN166 (temporary) - q.v. attachment lspci; (dmidecode (v 3.0) finds no SMBIOS nor DMI entry point) -- [Debian] System Information: Debian Release: stretch/sid APT prefers unstable APT policy: (998, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 4.9.2 (SMP w/4 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages linux-source-4.9 depends on: ii binutils 2.27.90.20170113-1 ii xz-utils 5.2.2-1.2 Versions of packages linux-source-4.9 recommends: ii bc 1.06.95-9+b2 ii gcc 4:6.2.1-1 ii libc6-dev [libc-dev] 2.24-8 ii make 4.1-9 Versions of packages linux-source-4.9 suggests: ii libncurses5-dev [ncurses-dev] 6.0+20161126-1 pn libqt4-dev pn pkg-config 1st test setting: Reading from the disks to /dev/null with dd if=/dev/sde of=/dev/null bs=4k count=2304k one after the other. (Disk ST3000DM001 was temporarily directly connected to the card's external SATA port.) Result: After some MB, but before 470 MiB errors occurred: failed command: READ FPDMA QUEUED [cf. attachment dmesg] failed command: READ DMA [cf. attachment dmesg_tmpHD] The errors were reproducible - however, they started after different amounts of data. 2nd test setting: Using Debian's kernel and patching the driver to not use 64 bit DMA [cf. attachment sata_sil24.c.diff]. Doing the same tests as above. Result: Repeatedly no errors occurred. N.B.: 1) There is a Windows Vista (32 bit) installation that uses two of the ports of the controller card as a fake RAID 1: There are no problems with the internal directly connected drives nor with an external drive. 2) Prior to this controller card there was a PCI Express card using SiI 3132, that - if I remember rightly - also had such problems, but they started after a greater amount of data. (At that time a Windows XP x64 installation had no problems, too.) If you need or want additional information or tests, let me know. Matthias 00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD/ATI] RS690 Host Bridge [1002:7910] Subsystem: Gigabyte Technology Co., Ltd RS690 Host Bridge [1458:5000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag+ RBE+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #2, PowerLimit 75.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd Off, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+ RootCap: CRSVisible+ RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0f00c Data: 41b1 Capabilities: [b0] Subsystem: Gigabyte Technology Co., Ltd RS690 PCI to PCI Bridge (PCI Express Graphics Port 0) [1458:5000] Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+ Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Kernel driver in use: pcieport Kernel modules: shpchp 00:04.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] Device [1002:7914] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag+ RBE+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x4, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #4, PowerLimit 25.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd Off, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+ RootCap: CRSVisible+ RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0f00c Data: 41c1 Capabilities: [b0] Subsystem: Gigabyte Technology Co., Ltd Device [1458:5000] Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+ Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Kernel driver in use: pcieport Kernel modules: shpchp 00:12.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI] SB600 Non-Raid-5 SATA [1002:4380] (prog-if 01 [AHCI 1.0]) Subsystem: Gigabyte Technology Co., Ltd Gigabyte GA-MA69G-S3H Motherboard [1458:b005] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration [1022:1200] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Kernel driver in use: k10temp Kernel modules: k10temp 00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control [1022:1204] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend- LnkCap: Port #0, Speed 8GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0f00c Data: 4143 Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 Capabilities: [150 v2] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [270 v1] #19 Kernel driver in use: radeon Kernel modules: radeon 01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series] [1002:aab0] Subsystem: Hightech Information System Ltd. Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series] [1787:aab0] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend- LnkCap: Port #0, Speed 8GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 Capabilities: [150 v2] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Kernel modules: snd_hda_intel 02:00.0 PCI bridge [0604]: Pericom Semiconductor Device [12d8:2304] (rev 05) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [5c] Vital Product Data Not readable Capabilities: [64] Vendor Specific Information: Len=34 Capabilities: [b0] Subsystem: Device [0000:0000] Capabilities: [c0] Express (v2) Upstream Port, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0 ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ SlotPowerLimit 0.000W DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 5GT/s, Width x2, ASPM not supported, Exit Latency L0s <512ns, L1 <1us ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR+, OBFF Via message DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [140 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=4 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=04 MaxTimeSlots=64 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128+ TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Port Arbitration Table Capabilities: [20c v1] Power Budgeting Capabilities: [230 v1] Latency Tolerance Reporting Max snoop latency: 0ns Max no snoop latency: 0ns Kernel driver in use: pcieport Kernel modules: shpchp 03:01.0 PCI bridge [0604]: Pericom Semiconductor Device [12d8:2304] (rev 05) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [4c] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0f00c Data: 41d1 Capabilities: [64] Vendor Specific Information: Len=34 Capabilities: [b0] Subsystem: Device [0000:0000] Capabilities: [c0] Express (v2) Downstream Port (Slot+), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0 ExtTag- RBE+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM not supported, Exit Latency L0s <512ns, L1 <1us ClockPM- Surprise- LLActRep- BwNot+ ASPMOptComp- LnkCtl: ASPM Disabled; Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #0, PowerLimit 0.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd Off, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet- LinkState+ DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR+, OBFF Via message ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -3.5dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [140 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=4 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=04 MaxTimeSlots=64 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128+ TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Port Arbitration Table Capabilities: [20c v1] Power Budgeting Capabilities: [220 v1] Access Control Services ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl+ DirectTrans+ ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans- Kernel driver in use: pcieport Kernel modules: shpchp 03:02.0 PCI bridge [0604]: Pericom Semiconductor Device [12d8:2304] (rev 05) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [4c] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0f00c Data: 41e1 Capabilities: [64] Vendor Specific Information: Len=34 Capabilities: [b0] Subsystem: Device [0000:0000] Capabilities: [c0] Express (v2) Downstream Port (Slot+), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0 ExtTag- RBE+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM not supported, Exit Latency L0s <512ns, L1 <1us ClockPM- Surprise- LLActRep- BwNot+ ASPMOptComp- LnkCtl: ASPM Disabled; Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #0, PowerLimit 0.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd Off, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet- LinkState+ DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR+, OBFF Via message ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -3.5dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [140 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=4 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=04 MaxTimeSlots=64 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128+ TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Port Arbitration Table Capabilities: [20c v1] Power Budgeting Capabilities: [220 v1] Access Control Services ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl+ DirectTrans+ ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans- Kernel driver in use: pcieport Kernel modules: shpchp 04:00.0 USB controller [0c03]: Fresco Logic FL1100 USB 3.0 Host Controller [1b73:1100] (rev 10) (prog-if 30 [XHCI]) Subsystem: Sonnet Technologies, Inc. FL1100 USB 3.0 Host Controller [16b8:6e02] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x230000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 base 0000CFF00000 mask FFFFFFF00000 uncachable [ 0.000000] 4 base 000100000000 mask FFFF00000000 write-back [ 0.000000] 5 base 000200000000 mask FFFFE0000000 write-back [ 0.000000] 6 base 000220000000 mask FFFFF0000000 write-back [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000230000000 aka 8960M [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: update [mem 0xcff00000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xcfee0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f4f50-0x000f4f5f] mapped at [ffff89b3400f4f50] [ 0.000000] Base memory trampoline at [ffff89b340093000] 93000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x207d4a000, 0x207d4afff] PGTABLE [ 0.000000] BRK [0x207d4b000, 0x207d4bfff] PGTABLE [ 0.000000] BRK [0x207d4c000, 0x207d4cfff] PGTABLE [ 0.000000] BRK [0x207d4d000, 0x207d4dfff] PGTABLE [ 0.000000] BRK [0x207d4e000, 0x207d4efff] PGTABLE [ 0.000000] BRK [0x207d4f000, 0x207d4ffff] PGTABLE [ 0.000000] BRK [0x207d50000, 0x207d50fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x3626b000-0x3712cfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F6920 000014 (v00 GBT ) [ 0.000000] ACPI: RSDT 0x00000000CFEE3000 000038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 0x00000000CFEE3040 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 0x00000000CFEE30C0 00494D (v01 GBT GBTUACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 0x00000000CFEE0000 000040 [ 0.000000] ACPI: SSDT 0x00000000CFEE7B00 00088C (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET 0x00000000CFEE83C0 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 0x00000000CFEE8400 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: APIC 0x00000000CFEE7A40 000084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x22fffb000-0x22fffffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000022fffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000098fff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cfedffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000022fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022fffffff] [ 0.000000] On node 0 totalpages: 2096760 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3992 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13244 pages used for memmap [ 0.000000] DMA32 zone: 847584 pages, LIFO batch:31 [ 0.000000] Normal zone: 19456 pages used for memmap [ 0.000000] Normal zone: 1245184 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00099000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcfee0000-0xcfee2fff] [ 0.000000] PM: Registered nosave memory: [mem 0xcfee3000-0xcfeeffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcfef0000-0xcfefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcff00000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff] [ 0.000000] e820: [mem 0xcff00000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 35 pages/cpu @ffff89b56fc00000 s103768 r8192 d31400 u524288 [ 0.000000] pcpu-alloc: s103768 r8192 d31400 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2063975 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.2 root=/dev/md127p2 ro printk.time=1 single video=DVI-D-1:1920x1200-8@60D video=VGA-1:d video=HDMI-A-1:d [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] AGP: Node 0: aperture [bus addr 0xc4000000-0xc5ffffff] (32MB) [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] AGP: Your BIOS doesn't leave an aperture memory hole [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup [ 0.000000] AGP: This costs you 64MB of RAM [ 0.000000] AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB) [ 0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff] [ 0.000000] Memory: 8092940K/8387040K available (6138K kernel code, 1134K rwdata, 2812K rodata, 1388K init, 812K bss, 294100K reserved, 0K cma-reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:33024 nr_irqs:456 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration failed [ 0.000000] tsc: Unable to calibrate against PIT [ 0.000000] tsc: using HPET reference calibration [ 0.000000] tsc: Detected 3207.269 MHz processor [ 0.000019] Calibrating delay loop (skipped), value calculated using timer frequency.. 6414.53 BogoMIPS (lpj=12829076) [ 0.000108] pid_max: default: 32768 minimum: 301 [ 0.000167] ACPI: Core revision 20160831 [ 0.002721] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.002856] Security Framework initialized [ 0.002901] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.002951] AppArmor: AppArmor disabled by boot time parameter [ 0.003356] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.006310] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.007570] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.007623] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.008007] CPU: Physical Processor ID: 0 [ 0.008051] CPU: Processor Core ID: 0 [ 0.008095] mce: CPU supports 6 MCE banks [ 0.008143] LVT offset 0 assigned for vector 0xf9 [ 0.008191] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 0.008235] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 [ 0.008508] Freeing SMP alternatives memory: 24K (ffffffffb6478000 - ffffffffb647e000) [ 0.035545] ftrace: allocating 24972 entries in 98 pages [ 0.043263] smpboot: Max logical packages: 1 [ 0.043864] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.189342] smpboot: CPU0: AMD Phenom(tm) II X4 955 Processor (family: 0x10, model: 0x4, stepping: 0x3) [ 0.189506] Performance Events: AMD PMU driver. [ 0.189589] ... version: 0 [ 0.189632] ... bit width: 48 [ 0.189675] ... generic registers: 4 [ 0.189718] ... value mask: 0000ffffffffffff [ 0.189761] ... max period: 00007fffffffffff [ 0.189805] ... fixed-purpose events: 0 [ 0.189847] ... event mask: 000000000000000f [ 0.190354] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.190519] x86: Booting SMP configuration: [ 0.190563] .... node #0, CPUs: #1 #2 #3 [ 0.431417] x86: Booted up 1 node, 4 CPUs [ 0.431503] smpboot: Total of 4 processors activated (25657.97 BogoMIPS) [ 0.437278] devtmpfs: initialized [ 0.437394] x86/mm: Memory block size: 128MB [ 0.441042] PM: Registering ACPI NVS region [mem 0xcfee0000-0xcfee2fff] (12288 bytes) [ 0.441151] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.441236] pinctrl core: initialized pinctrl subsystem [ 0.441399] NET: Registered protocol family 16 [ 0.453359] cpuidle: using governor ladder [ 0.469358] cpuidle: using governor menu [ 0.469409] node 0 link 0: io port [b000, ffff] [ 0.469410] TOM: 00000000d0000000 aka 3328M [ 0.469454] Fam 10h mmconf [mem 0xe0000000-0xe00fffff] [ 0.469456] node 0 link 0: mmio [a0000, bffff] [ 0.469457] node 0 link 0: mmio [d0000000, dfffffff] [ 0.469459] node 0 link 0: mmio [f0000000, fe02ffff] [ 0.469460] node 0 link 0: mmio [e0000000, e06fffff] ==> [e0100000, e06fffff] [ 0.469461] TOM2: 0000000230000000 aka 8960M [ 0.469505] bus: [bus 00-06] on node 0 link 0 [ 0.469506] bus: 00 [io 0x0000-0xffff] [ 0.469507] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.469507] bus: 00 [mem 0xd0000000-0xdfffffff] [ 0.469508] bus: 00 [mem 0xe0700000-0xffffffff] [ 0.469508] bus: 00 [mem 0xe0100000-0xe06fffff] [ 0.469509] bus: 00 [mem 0x230000000-0xfcffffffff] [ 0.469574] ACPI: bus type PCI registered [ 0.469618] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.469699] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.469749] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.469810] PCI: Using configuration type 1 for base access [ 0.470144] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.470189] mtrr: probably your BIOS does not setup all CPUs. [ 0.470232] mtrr: corrected configuration. [ 0.485543] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 0.485590] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.485975] ACPI: Added _OSI(Module Device) [ 0.486022] ACPI: Added _OSI(Processor Device) [ 0.486066] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.486109] ACPI: Added _OSI(Processor Aggregator Device) [ 0.486328] ACPI: Executed 1 blocks of module-level executable AML code [ 0.491141] ACPI: Interpreter enabled [ 0.491197] ACPI: (supports S0 S3 S4 S5) [ 0.491240] ACPI: Using IOAPIC for interrupt routing [ 0.491336] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.495034] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.495084] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.495135] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.495393] PCI host bridge to bus 0000:00 [ 0.495438] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.495483] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.495528] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.498051] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.498100] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff window] [ 0.498149] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.498198] pci 0000:00:00.0: [1002:7910] type 00 class 0x060000 [ 0.498279] pci 0000:00:02.0: [1002:7913] type 01 class 0x060400 [ 0.498308] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.498346] pci 0000:00:02.0: System wakeup disabled by ACPI [ 0.498424] pci 0000:00:04.0: [1002:7914] type 01 class 0x060400 [ 0.498451] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.498485] pci 0000:00:04.0: System wakeup disabled by ACPI [ 0.498582] pci 0000:00:12.0: [1002:4380] type 00 class 0x010601 [ 0.498598] pci 0000:00:12.0: reg 0x10: [io 0xff00-0xff07] [ 0.498607] pci 0000:00:12.0: reg 0x14: [io 0xfe00-0xfe03] [ 0.498616] pci 0000:00:12.0: reg 0x18: [io 0xfd00-0xfd07] [ 0.498624] pci 0000:00:12.0: reg 0x1c: [io 0xfc00-0xfc03] [ 0.498633] pci 0000:00:12.0: reg 0x20: [io 0xfb00-0xfb0f] [ 0.498642] pci 0000:00:12.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff] [ 0.498740] pci 0000:00:13.0: [1002:4387] type 00 class 0x0c0310 [ 0.498752] pci 0000:00:13.0: reg 0x10: [mem 0xfe02e000-0xfe02efff] [ 0.498843] pci 0000:00:13.0: System wakeup disabled by ACPI [ 0.498920] pci 0000:00:13.1: [1002:4388] type 00 class 0x0c0310 [ 0.498933] pci 0000:00:13.1: reg 0x10: [mem 0xfe02d000-0xfe02dfff] [ 0.499024] pci 0000:00:13.1: System wakeup disabled by ACPI [ 0.499101] pci 0000:00:13.2: [1002:4389] type 00 class 0x0c0310 [ 0.499114] pci 0000:00:13.2: reg 0x10: [mem 0xfe02c000-0xfe02cfff] [ 0.499204] pci 0000:00:13.2: System wakeup disabled by ACPI [ 0.499285] pci 0000:00:13.3: [1002:438a] type 00 class 0x0c0310 [ 0.499298] pci 0000:00:13.3: reg 0x10: [mem 0xfe02b000-0xfe02bfff] [ 0.499400] pci 0000:00:13.3: System wakeup disabled by ACPI [ 0.499477] pci 0000:00:13.4: [1002:438b] type 00 class 0x0c0310 [ 0.499490] pci 0000:00:13.4: reg 0x10: [mem 0xfe02a000-0xfe02afff] [ 0.499581] pci 0000:00:13.4: System wakeup disabled by ACPI [ 0.499661] pci 0000:00:13.5: [1002:4386] type 00 class 0x0c0320 [ 0.499678] pci 0000:00:13.5: reg 0x10: [mem 0xfe029000-0xfe0290ff] [ 0.499758] pci 0000:00:13.5: supports D1 D2 [ 0.499759] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot [ 0.499797] pci 0000:00:13.5: System wakeup disabled by ACPI [ 0.499879] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.499899] pci 0000:00:14.0: reg 0x10: [io 0x0b00-0x0b0f] [ 0.500031] pci 0000:00:14.1: [1002:438c] type 00 class 0x01018a [ 0.500044] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007] [ 0.500052] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003] [ 0.500061] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007] [ 0.500070] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003] [ 0.500079] pci 0000:00:14.1: reg 0x20: [io 0xf900-0xf90f] [ 0.500098] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.500143] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.500187] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.500232] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.500345] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.500365] pci 0000:00:14.2: reg 0x10: [mem 0xfe024000-0xfe027fff 64bit] [ 0.500432] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.500469] pci 0000:00:14.2: System wakeup disabled by ACPI [ 0.500545] pci 0000:00:14.3: [1002:438d] type 00 class 0x060100 [ 0.500671] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.500739] pci 0000:00:14.4: System wakeup disabled by ACPI [ 0.500819] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.500883] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.500942] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.501000] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.501061] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.501166] pci 0000:01:00.0: [1002:6837] type 00 class 0x030000 [ 0.501181] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.501191] pci 0000:01:00.0: reg 0x18: [mem 0xfdd80000-0xfddbffff 64bit] [ 0.501198] pci 0000:01:00.0: reg 0x20: [io 0xce00-0xceff] [ 0.501210] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.501255] pci 0000:01:00.0: supports D1 D2 [ 0.501256] pci 0000:01:00.0: PME# supported from D1 D2 D3hot [ 0.501312] pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300 [ 0.501326] pci 0000:01:00.1: reg 0x10: [mem 0xfddfc000-0xfddfffff 64bit] [ 0.501402] pci 0000:01:00.1: supports D1 D2 [ 0.515403] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.515451] pci 0000:00:02.0: bridge window [io 0xc000-0xcfff] [ 0.515453] pci 0000:00:02.0: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.515455] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.515534] pci 0000:02:00.0: [12d8:2304] type 01 class 0x060400 [ 0.515630] pci 0000:02:00.0: Max Payload Size set to 128 (was 256, max 256) [ 0.515785] pci 0000:02:00.0: supports D1 D2 [ 0.515786] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.527407] pci 0000:00:04.0: PCI bridge to [bus 02-05] [ 0.527455] pci 0000:00:04.0: bridge window [io 0xd000-0xefff] [ 0.527457] pci 0000:00:04.0: bridge window [mem 0xfdb00000-0xfdcfffff] [ 0.527459] pci 0000:00:04.0: bridge window [mem 0xfde00000-0xfdffffff 64bit pref] [ 0.527567] pci 0000:03:01.0: [12d8:2304] type 01 class 0x060400 [ 0.527642] pci 0000:03:01.0: Max Payload Size set to 128 (was 256, max 256) [ 0.527796] pci 0000:03:01.0: supports D1 D2 [ 0.527797] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.527896] pci 0000:03:02.0: [12d8:2304] type 01 class 0x060400 [ 0.527969] pci 0000:03:02.0: Max Payload Size set to 128 (was 256, max 256) [ 0.528114] pci 0000:03:02.0: supports D1 D2 [ 0.528114] pci 0000:03:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.528242] pci 0000:02:00.0: PCI bridge to [bus 03-05] [ 0.528294] pci 0000:02:00.0: bridge window [io 0xd000-0xefff] [ 0.528299] pci 0000:02:00.0: bridge window [mem 0xfdb00000-0xfdcfffff] [ 0.528307] pci 0000:02:00.0: bridge window [mem 0xfde00000-0xfdffffff 64bit pref] [ 0.528392] pci 0000:04:00.0: [1b73:1100] type 00 class 0x0c0330 [ 0.528424] pci 0000:04:00.0: reg 0x10: [mem 0xfdce0000-0xfdceffff 64bit] [ 0.528445] pci 0000:04:00.0: reg 0x18: [mem 0xfdcff000-0xfdcfffff 64bit] [ 0.528467] pci 0000:04:00.0: reg 0x20: [mem 0xfdcfe000-0xfdcfefff 64bit] [ 0.528492] pci 0000:04:00.0: Max Payload Size set to 128 (was 256, max 512) [ 0.528611] pci 0000:04:00.0: supports D1 [ 0.528612] pci 0000:04:00.0: PME# supported from D0 D1 D3hot [ 0.528701] pci 0000:03:01.0: PCI bridge to [bus 04] [ 0.528752] pci 0000:03:01.0: bridge window [io 0xe000-0xefff] [ 0.528757] pci 0000:03:01.0: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.528765] pci 0000:03:01.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.528852] pci 0000:05:00.0: [11c1:5901] type 00 class 0x0c0010 [ 0.528884] pci 0000:05:00.0: reg 0x10: [mem 0xfdbff000-0xfdbfffff 64bit] [ 0.528962] pci 0000:05:00.0: Max Payload Size set to 128 (was 256, max 256) [ 0.529090] pci 0000:05:00.0: supports D1 D2 [ 0.529090] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot [ 0.539412] pci 0000:03:02.0: PCI bridge to [bus 05] [ 0.539467] pci 0000:03:02.0: bridge window [io 0xd000-0xdfff] [ 0.539472] pci 0000:03:02.0: bridge window [mem 0xfdb00000-0xfdbfffff] [ 0.539480] pci 0000:03:02.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref] [ 0.539573] pci 0000:06:06.0: [1095:3124] type 00 class 0x010400 [ 0.539604] pci 0000:06:06.0: reg 0x10: [mem 0xfdaff000-0xfdaff07f 64bit] [ 0.539623] pci 0000:06:06.0: reg 0x18: [mem 0xfdaf0000-0xfdaf7fff 64bit] [ 0.539635] pci 0000:06:06.0: reg 0x20: [io 0xbf00-0xbf0f] [ 0.539659] pci 0000:06:06.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 0.539723] pci 0000:06:06.0: supports D1 D2 [ 0.539769] pci 0000:06:07.0: [1412:1712] type 00 class 0x040100 [ 0.539789] pci 0000:06:07.0: reg 0x10: [io 0xbe00-0xbe1f] [ 0.539800] pci 0000:06:07.0: reg 0x14: [io 0xbd00-0xbd0f] [ 0.539812] pci 0000:06:07.0: reg 0x18: [io 0xbc00-0xbc0f] [ 0.539823] pci 0000:06:07.0: reg 0x1c: [io 0xbb00-0xbb3f] [ 0.539891] pci 0000:06:07.0: supports D2 [ 0.539938] pci 0000:06:0e.0: [104c:8024] type 00 class 0x0c0010 [ 0.539959] pci 0000:06:0e.0: reg 0x10: [mem 0xfdafe000-0xfdafe7ff] [ 0.539971] pci 0000:06:0e.0: reg 0x14: [mem 0xfdaf8000-0xfdafbfff] [ 0.540064] pci 0000:06:0e.0: supports D1 D2 [ 0.540065] pci 0000:06:0e.0: PME# supported from D0 D1 D2 D3hot [ 0.540113] pci 0000:06:0f.0: [10ec:8167] type 00 class 0x020000 [ 0.540132] pci 0000:06:0f.0: reg 0x10: [io 0xb800-0xb8ff] [ 0.540143] pci 0000:06:0f.0: reg 0x14: [mem 0xfdafd000-0xfdafd0ff] [ 0.540196] pci 0000:06:0f.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.540230] pci 0000:06:0f.0: supports D1 D2 [ 0.540231] pci 0000:06:0f.0: PME# supported from D1 D2 D3hot D3cold [ 0.540292] pci 0000:00:14.4: PCI bridge to [bus 06] (subtractive decode) [ 0.540339] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff] [ 0.540342] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff] [ 0.540345] pci 0000:00:14.4: bridge window [mem 0xfd900000-0xfd9fffff pref] [ 0.540346] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.540347] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.540348] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.540349] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode) [ 0.540350] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xfebfffff window] (subtractive decode) [ 0.540500] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.541005] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.541508] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.542010] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.542511] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.543013] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.543519] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.544019] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.544990] ACPI: Enabled 1 GPEs in block 00 to 1F [ 0.545252] vgaarb: setting as boot device: PCI:0000:01:00.0 [ 0.545297] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.545346] vgaarb: loaded [ 0.545389] vgaarb: bridge control possible 0000:01:00.0 [ 0.545464] dmi: Firmware registration failed. [ 0.545561] PCI: Using ACPI for IRQ routing [ 0.554455] PCI: pci_cache_line_size set to 64 bytes [ 0.554534] e820: reserve RAM buffer [mem 0x00099800-0x0009ffff] [ 0.554535] e820: reserve RAM buffer [mem 0xcfee0000-0xcfffffff] [ 0.554750] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.554985] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.557091] clocksource: Switched to clocksource hpet [ 0.563981] VFS: Disk quotas dquot_6.6.0 [ 0.564050] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.564175] pnp: PnP ACPI init [ 0.564332] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 0.564377] system 00:00: [io 0x0220-0x0225] has been reserved [ 0.564421] system 00:00: [io 0x0290-0x0294] has been reserved [ 0.564467] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.564626] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref] [ 0.564682] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:06:06.0 BAR 6 [mem 0x00000000-0x0007ffff pref] [ 0.564736] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:06:0f.0 BAR 6 [mem 0x00000000-0x0001ffff pref] [ 0.564806] system 00:01: [io 0x4100-0x411f] has been reserved [ 0.564851] system 00:01: [io 0x0228-0x022f] has been reserved [ 0.564895] system 00:01: [io 0x040b] has been reserved [ 0.564939] system 00:01: [io 0x04d6] has been reserved [ 0.564983] system 00:01: [io 0x0c00-0x0c01] has been reserved [ 0.565027] system 00:01: [io 0x0c14] has been reserved [ 0.565072] system 00:01: [io 0x0c50-0x0c52] has been reserved [ 0.565128] system 00:01: [io 0x0c6c-0x0c6d] has been reserved [ 0.565173] system 00:01: [io 0x0c6f] has been reserved [ 0.565217] system 00:01: [io 0x0cd0-0x0cd1] has been reserved [ 0.565261] system 00:01: [io 0x0cd2-0x0cd3] has been reserved [ 0.565306] system 00:01: [io 0x0cd4-0x0cdf] has been reserved [ 0.565350] system 00:01: [io 0x4000-0x40fe] has been reserved [ 0.565394] system 00:01: [io 0x4210-0x4217] has been reserved [ 0.565439] system 00:01: [io 0x0b00-0x0b1f] could not be reserved [ 0.565483] system 00:01: [io 0x0238-0x023f] has been reserved [ 0.565528] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved [ 0.565577] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.565704] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.565823] pnp 00:03: [dma 2] [ 0.565847] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.566092] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.566330] pnp 00:05: [dma 3] [ 0.566362] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.566435] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved [ 0.566481] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.566613] system 00:07: [mem 0x000d6000-0x000d7fff] has been reserved [ 0.566659] system 00:07: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.566703] system 00:07: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.566748] system 00:07: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.566792] system 00:07: [mem 0xcfee0000-0xcfefffff] could not be reserved [ 0.566837] system 00:07: [mem 0xffff0000-0xffffffff] has been reserved [ 0.566882] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.566926] system 00:07: [mem 0x00100000-0xcfedffff] could not be reserved [ 0.566971] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.567016] system 00:07: [mem 0xfee00000-0xfee00fff] could not be reserved [ 0.567060] system 00:07: [mem 0xfff80000-0xfffeffff] has been reserved [ 0.567105] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.567118] pnp: PnP ACPI: found 8 devices [ 0.573881] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.573989] pci 0000:01:00.0: BAR 6: assigned [mem 0xfdd00000-0xfdd1ffff pref] [ 0.574038] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.574083] pci 0000:00:02.0: bridge window [io 0xc000-0xcfff] [ 0.574128] pci 0000:00:02.0: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.574173] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.574223] pci 0000:03:01.0: PCI bridge to [bus 04] [ 0.574269] pci 0000:03:01.0: bridge window [io 0xe000-0xefff] [ 0.574319] pci 0000:03:01.0: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.574367] pci 0000:03:01.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.574422] pci 0000:03:02.0: PCI bridge to [bus 05] [ 0.574468] pci 0000:03:02.0: bridge window [io 0xd000-0xdfff] [ 0.574518] pci 0000:03:02.0: bridge window [mem 0xfdb00000-0xfdbfffff] [ 0.574566] pci 0000:03:02.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref] [ 0.574621] pci 0000:02:00.0: PCI bridge to [bus 03-05] [ 0.574667] pci 0000:02:00.0: bridge window [io 0xd000-0xefff] [ 0.574717] pci 0000:02:00.0: bridge window [mem 0xfdb00000-0xfdcfffff] [ 0.574765] pci 0000:02:00.0: bridge window [mem 0xfde00000-0xfdffffff 64bit pref] [ 0.574820] pci 0000:00:04.0: PCI bridge to [bus 02-05] [ 0.574864] pci 0000:00:04.0: bridge window [io 0xd000-0xefff] [ 0.574909] pci 0000:00:04.0: bridge window [mem 0xfdb00000-0xfdcfffff] [ 0.574954] pci 0000:00:04.0: bridge window [mem 0xfde00000-0xfdffffff 64bit pref] [ 0.575005] pci 0000:06:06.0: BAR 6: assigned [mem 0xfd900000-0xfd97ffff pref] [ 0.575054] pci 0000:06:0f.0: BAR 6: assigned [mem 0xfd980000-0xfd99ffff pref] [ 0.575103] pci 0000:00:14.4: PCI bridge to [bus 06] [ 0.575147] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff] [ 0.575195] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff] [ 0.575241] pci 0000:00:14.4: bridge window [mem 0xfd900000-0xfd9fffff pref] [ 0.575295] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.575296] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.575297] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.575298] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window] [ 0.575299] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff window] [ 0.575300] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] [ 0.575301] pci_bus 0000:01: resource 1 [mem 0xfdd00000-0xfddfffff] [ 0.575301] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.575303] pci_bus 0000:02: resource 0 [io 0xd000-0xefff] [ 0.575303] pci_bus 0000:02: resource 1 [mem 0xfdb00000-0xfdcfffff] [ 0.575304] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdffffff 64bit pref] [ 0.575305] pci_bus 0000:03: resource 0 [io 0xd000-0xefff] [ 0.575306] pci_bus 0000:03: resource 1 [mem 0xfdb00000-0xfdcfffff] [ 0.575307] pci_bus 0000:03: resource 2 [mem 0xfde00000-0xfdffffff 64bit pref] [ 0.575308] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 0.575309] pci_bus 0000:04: resource 1 [mem 0xfdc00000-0xfdcfffff] [ 0.575310] pci_bus 0000:04: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.575311] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 0.575312] pci_bus 0000:05: resource 1 [mem 0xfdb00000-0xfdbfffff] [ 0.575313] pci_bus 0000:05: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref] [ 0.575314] pci_bus 0000:06: resource 0 [io 0xb000-0xbfff] [ 0.575315] pci_bus 0000:06: resource 1 [mem 0xfda00000-0xfdafffff] [ 0.575316] pci_bus 0000:06: resource 2 [mem 0xfd900000-0xfd9fffff pref] [ 0.575317] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7 window] [ 0.575318] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff window] [ 0.575318] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.575319] pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000dffff window] [ 0.575320] pci_bus 0000:06: resource 8 [mem 0xd0000000-0xfebfffff window] [ 0.575424] NET: Registered protocol family 2 [ 0.575655] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.575878] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.576242] TCP: Hash tables configured (established 65536 bind 65536) [ 0.576341] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.576436] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.576569] NET: Registered protocol family 1 [ 1.037374] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.037547] PCI: CLS 4 bytes, default 64 [ 1.037596] Unpacking initramfs... [ 2.404026] Freeing initrd memory: 15112K (ffff89b37626b000 - ffff89b37712d000) [ 2.404368] PCI-DMA: Disabling AGP. [ 2.404511] PCI-DMA: aperture base @ c4000000 size 65536 KB [ 2.404555] PCI-DMA: using GART IOMMU. [ 2.404600] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 2.407924] LVT offset 1 assigned for vector 0x400 [ 2.407981] IBS: LVT offset 1 assigned [ 2.408157] perf: AMD IBS detected (0x0000001f) [ 2.408524] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 2.408596] audit: initializing netlink subsys (disabled) [ 2.408663] audit: type=2000 audit(1484393533.296:1): initialized [ 2.408974] Initialise system trusted keyrings [ 2.409193] workingset: timestamp_bits=40 max_order=21 bucket_order=0 [ 2.409293] zbud: loaded [ 2.454442] Key type asymmetric registered [ 2.454491] Asymmetric key parser 'x509' registered [ 2.454576] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 2.454664] io scheduler noop registered [ 2.454708] io scheduler deadline registered [ 2.454755] io scheduler cfq registered (default) [ 2.455507] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.455555] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.455758] GHES: HEST is not enabled! [ 2.455870] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.476468] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 2.476941] Linux agpgart interface v0.103 [ 2.477012] AMD IOMMUv2 driver by Joerg Roedel [ 2.477056] AMD IOMMUv2 functionality not available on this system [ 2.479968] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 2.513615] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS? [ 2.513663] i8042: If AUX port is really absent please use the 'i8042.noaux' option [ 2.797233] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.797443] mousedev: PS/2 mouse device common for all mice [ 2.797535] rtc_cmos 00:02: RTC can wake from S4 [ 2.797692] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 2.797771] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs [ 2.797909] ledtrig-cpu: registered to indicate activity on CPUs [ 2.797952] dmi-sysfs: dmi entry is absent. [ 2.798119] NET: Registered protocol family 10 [ 2.798377] mip6: Mobile IPv6 [ 2.798421] NET: Registered protocol family 17 [ 2.798466] mpls_gso: MPLS GSO support [ 2.798730] microcode: CPU0: patch_level=0x010000af [ 2.798783] microcode: CPU1: patch_level=0x010000af [ 2.798844] microcode: CPU2: patch_level=0x010000af [ 2.798909] microcode: CPU3: patch_level=0x010000af [ 2.798992] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 2.799165] registered taskstats version 1 [ 2.799210] Loading compiled-in X.509 certificates [ 2.799265] zswap: loaded using pool lzo/zbud [ 2.799749] rtc_cmos 00:02: setting system clock to 2017-01-14 11:32:13 UTC (1484393533) [ 2.799844] PM: Hibernation image not present or could not be loaded. [ 2.801085] Freeing unused kernel memory: 1388K (ffffffffb631d000 - ffffffffb6478000) [ 2.801160] Write protecting the kernel read-only data: 12288k [ 2.801844] Freeing unused kernel memory: 2040K (ffff89b547402000 - ffff89b547600000) [ 2.804783] Freeing unused kernel memory: 1284K (ffff89b5478bf000 - ffff89b547a00000) [ 2.810210] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.823232] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.823338] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.823390] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.823443] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.824136] random: udevadm: uninitialized urandom read (16 bytes read) [ 2.824211] random: udevadm: uninitialized urandom read (16 bytes read) [ 2.825023] random: udevadm: uninitialized urandom read (16 bytes read) [ 2.825386] random: udevadm: uninitialized urandom read (16 bytes read) [ 2.825480] random: udevadm: uninitialized urandom read (16 bytes read) [ 2.825568] random: udevadm: uninitialized urandom read (16 bytes read) [ 2.842139] fjes: module verification failed: signature and/or required key missing - tainting kernel [ 2.842553] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED [ 2.843356] Floppy drive(s): fd0 is 1.44M [ 2.848479] SCSI subsystem initialized [ 2.849152] ACPI: bus type USB registered [ 2.849221] usbcore: registered new interface driver usbfs [ 2.849274] usbcore: registered new interface driver hub [ 2.849337] usbcore: registered new device driver usb [ 2.849584] [drm] Initialized [ 2.849832] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.850434] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.850734] ehci-pci: EHCI PCI platform driver [ 2.850893] libata version 3.00 loaded. [ 2.850976] ehci-pci 0000:00:13.5: EHCI Host Controller [ 2.851031] ehci-pci 0000:00:13.5: new USB bus registered, assigned bus number 1 [ 2.851088] ehci-pci 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround [ 2.851150] ehci-pci 0000:00:13.5: debug port 1 [ 2.851253] ehci-pci 0000:00:13.5: irq 19, io mem 0xfe029000 [ 2.852904] sata_sil24 0000:06:06.0: version 1.1 [ 2.853794] scsi host0: sata_sil24 [ 2.853949] scsi host1: sata_sil24 [ 2.854075] scsi host2: sata_sil24 [ 2.854219] scsi host3: sata_sil24 [ 2.854311] ata1: SATA max UDMA/100 host m128@0xfdaff000 port 0xfdaf0000 irq 20 [ 2.854367] ata2: SATA max UDMA/100 host m128@0xfdaff000 port 0xfdaf2000 irq 20 [ 2.854424] ata3: SATA max UDMA/100 host m128@0xfdaff000 port 0xfdaf4000 irq 20 [ 2.854476] ata4: SATA max UDMA/100 host m128@0xfdaff000 port 0xfdaf6000 irq 20 [ 2.854598] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.854765] r8169 0000:06:0f.0 (unnamed net_device) (uninitialized): not PCI Express [ 2.855109] r8169 0000:06:0f.0 eth0: RTL8169sc/8110sc at 0xffffb7b900c91000, 00:1a:4d:9a:6d:99, XID 18000000 IRQ 23 [ 2.855161] r8169 0000:06:0f.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok] [ 2.859817] [drm] radeon kernel modesetting enabled. [ 2.861011] [drm] initializing kernel modesetting (VERDE 0x1002:0x6837 0x1787:0x2330 0x00). [ 2.861072] [drm] register mmio base: 0xFDD80000 [ 2.861137] [drm] register mmio size: 262144 [ 2.861243] radeon 0000:01:00.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0xffff [ 2.861696] ATOM BIOS: C44101 [ 2.861907] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [ 2.861957] radeon 0000:01:00.0: GTT: 2048M 0x0000000040000000 - 0x00000000BFFFFFFF [ 2.862013] [drm] Detected VRAM RAM=1024M, BAR=256M [ 2.862062] [drm] RAM width 128bits DDR [ 2.862177] [TTM] Zone kernel: Available graphics memory: 4089370 kiB [ 2.862225] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 2.862270] [TTM] Initializing pool allocator [ 2.862322] [TTM] Initializing DMA pool allocator [ 2.862387] [drm] radeon: 1024M of VRAM memory ready [ 2.862431] [drm] radeon: 2048M of GTT memory ready. [ 2.862488] [drm] Loading verde Microcode [ 2.862554] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/verde_pfp.bin [ 2.862615] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/verde_me.bin [ 2.862680] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/verde_ce.bin [ 2.862743] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/verde_rlc.bin [ 2.862810] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/verde_mc.bin [ 2.862887] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/verde_smc.bin [ 2.862938] [drm] Internal thermal controller with fan control [ 2.863047] [drm] probing gen 2 caps for device 1002:7913 = 100d01/0 [ 2.865354] FDC 0 is a post-1991 82077 [ 2.869116] ehci-pci 0000:00:13.5: USB 2.0 started, EHCI 1.00 [ 2.869206] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.869255] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.869304] usb usb1: Product: EHCI Host Controller [ 2.869354] usb usb1: Manufacturer: Linux 4.9.2 ehci_hcd [ 2.869398] usb usb1: SerialNumber: 0000:00:13.5 [ 2.869583] hub 1-0:1.0: USB hub found [ 2.869642] hub 1-0:1.0: 10 ports detected [ 2.869912] ahci 0000:00:12.0: version 3.0 [ 2.870031] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit [ 2.870239] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 2.870336] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part ccc [ 2.870605] ohci-pci: OHCI PCI platform driver [ 2.871068] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 2.871140] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2 [ 2.871363] [drm] radeon: dpm initialized [ 2.871552] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/TAHITI_uvd.bin [ 2.871701] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/TAHITI_vce.bin [ 2.872466] [drm] Found VCE firmware/feedback version 50.0.1 / 17! [ 2.872575] [drm] GART: num cpu pages 524288, num gpu pages 524288 [ 2.872668] xhci_hcd 0000:04:00.0: hcc params 0x200071e1 hci version 0x100 quirks 0x00000010 [ 2.872925] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.872971] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.873025] usb usb2: Product: xHCI Host Controller [ 2.873073] usb usb2: Manufacturer: Linux 4.9.2 xhci-hcd [ 2.873148] usb usb2: SerialNumber: 0000:04:00.0 [ 2.873477] hub 2-0:1.0: USB hub found [ 2.873540] hub 2-0:1.0: 4 ports detected [ 2.873739] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 2.873792] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3 [ 2.873862] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.873936] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.873984] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.874032] usb usb3: Product: xHCI Host Controller [ 2.874082] usb usb3: Manufacturer: Linux 4.9.2 xhci-hcd [ 2.874126] usb usb3: SerialNumber: 0000:04:00.0 [ 2.874700] hub 3-0:1.0: USB hub found [ 2.874871] hub 3-0:1.0: 4 ports detected [ 2.875504] [drm] probing gen 2 caps for device 1002:7913 = 100d01/0 [ 2.877835] scsi host4: ahci [ 2.881155] scsi host5: ahci [ 2.881376] scsi host6: ahci [ 2.881565] scsi host7: ahci [ 2.881715] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 [ 2.881830] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 [ 2.882625] r8169 0000:06:0f.0 enp6s15: renamed from eth0 [ 2.886417] ata7: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 [ 2.886505] ata8: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 [ 2.887587] scsi host8: pata_atiixp [ 2.887817] scsi host9: pata_atiixp [ 2.887949] ata9: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14 [ 2.888045] ata10: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15 [ 2.888168] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 2.888298] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb10 [ 2.888544] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 2.888683] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4 [ 2.888842] ohci-pci 0000:00:13.0: irq 16, io mem 0xfe02e000 [ 2.894834] [drm] PCIE GART of 2048M enabled (table at 0x00000000001D6000). [ 2.894998] radeon 0000:01:00.0: WB enabled [ 2.895043] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff89b55f9b9c00 [ 2.895093] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff89b55f9b9c04 [ 2.895142] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff89b55f9b9c08 [ 2.895192] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff89b55f9b9c0c [ 2.895241] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xffff89b55f9b9c10 [ 2.895741] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffb7b901635a18 [ 2.915851] radeon 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000040000c18 and cpu addr 0xffff89b55f9b9c18 [ 2.915901] radeon 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c and cpu addr 0xffff89b55f9b9c1c [ 2.915975] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.916026] [drm] Driver supports precise vblank timestamp query. [ 2.916073] radeon 0000:01:00.0: radeon: MSI limited to 32-bit [ 2.916162] radeon 0000:01:00.0: radeon: using MSI. [ 2.916239] [drm] radeon: irq initialized. [ 2.925180] firewire_ohci 0000:05:00.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x0, physUB [ 2.953176] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.953240] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.953306] usb usb4: Product: OHCI PCI host controller [ 2.953367] usb usb4: Manufacturer: Linux 4.9.2 ohci_hcd [ 2.953428] usb usb4: SerialNumber: 0000:00:13.0 [ 2.953617] hub 4-0:1.0: USB hub found [ 2.953693] hub 4-0:1.0: 2 ports detected [ 2.953942] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 2.954007] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 5 [ 2.954109] ohci-pci 0000:00:13.1: irq 17, io mem 0xfe02d000 [ 2.985180] firewire_ohci 0000:06:0e.0: added OHCI v1.10 device as card 1, 4 IR + 8 IT contexts, quirks 0x2 [ 3.021177] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.021241] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.021307] usb usb5: Product: OHCI PCI host controller [ 3.021368] usb usb5: Manufacturer: Linux 4.9.2 ohci_hcd [ 3.021429] usb usb5: SerialNumber: 0000:00:13.1 [ 3.021613] hub 5-0:1.0: USB hub found [ 3.021689] hub 5-0:1.0: 2 ports detected [ 3.021943] ohci-pci 0000:00:13.2: OHCI PCI host controller [ 3.022008] ohci-pci 0000:00:13.2: new USB bus registered, assigned bus number 6 [ 3.022111] ohci-pci 0000:00:13.2: irq 18, io mem 0xfe02c000 [ 3.052125] ata9.00: ATAPI: ASUS DRW-1814BL, 1.14, max UDMA/66 [ 3.057341] ata9.00: configured for UDMA/66 [ 3.085182] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.085245] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.085311] usb usb6: Product: OHCI PCI host controller [ 3.085372] usb usb6: Manufacturer: Linux 4.9.2 ohci_hcd [ 3.085434] usb usb6: SerialNumber: 0000:00:13.2 [ 3.085623] hub 6-0:1.0: USB hub found [ 3.085702] hub 6-0:1.0: 2 ports detected [ 3.085954] ohci-pci 0000:00:13.3: OHCI PCI host controller [ 3.086020] ohci-pci 0000:00:13.3: new USB bus registered, assigned bus number 7 [ 3.086108] ohci-pci 0000:00:13.3: irq 17, io mem 0xfe02b000 [ 3.153163] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.153227] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.153292] usb usb7: Product: OHCI PCI host controller [ 3.153354] usb usb7: Manufacturer: Linux 4.9.2 ohci_hcd [ 3.153415] usb usb7: SerialNumber: 0000:00:13.3 [ 3.153583] hub 7-0:1.0: USB hub found [ 3.153659] hub 7-0:1.0: 2 ports detected [ 3.153885] ohci-pci 0000:00:13.4: OHCI PCI host controller [ 3.153949] ohci-pci 0000:00:13.4: new USB bus registered, assigned bus number 8 [ 3.154047] ohci-pci 0000:00:13.4: irq 18, io mem 0xfe02a000 [ 3.199705] ata8: SATA link down (SStatus 0 SControl 300) [ 3.205129] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 3.217168] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.217231] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.217296] usb usb8: Product: OHCI PCI host controller [ 3.217357] usb usb8: Manufacturer: Linux 4.9.2 ohci_hcd [ 3.217418] usb usb8: SerialNumber: 0000:00:13.4 [ 3.217588] hub 8-0:1.0: USB hub found [ 3.217663] hub 8-0:1.0: 2 ports detected [ 3.361131] ata7: softreset failed (device not ready) [ 3.361196] ata7: applying PMP SRST workaround and retrying [ 3.377529] usb 1-1: New USB device found, idVendor=03f0, idProduct=0610 [ 3.377592] usb 1-1: New USB device strings: Mfr=10, Product=11, SerialNumber=0 [ 3.377658] usb 1-1: Product: USB2.0 HUB [ 3.377718] usb 1-1: Manufacturer: Genesyslogic [ 3.378171] hub 1-1:1.0: USB hub found [ 3.379915] hub 1-1:1.0: 4 ports detected [ 3.437206] firewire_core 0000:05:00.0: created device fw0: GUID 00309300000001c3, S800 [ 3.441187] tsc: Refined TSC clocksource calibration: 3207.272 MHz [ 3.441259] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e3b1f431f7, max_idle_ns: 440795241363 ns [ 3.501195] firewire_core 0000:06:0e.0: created device fw1: GUID 001a4d0000eb2917, S400 [ 3.503056] [drm] ring test on 0 succeeded in 1 usecs [ 3.503107] [drm] ring test on 1 succeeded in 1 usecs [ 3.503154] [drm] ring test on 2 succeeded in 1 usecs [ 3.503212] [drm] ring test on 3 succeeded in 10 usecs [ 3.503267] [drm] ring test on 4 succeeded in 10 usecs [ 3.521140] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.521313] ata7.00: ATA-8: OCZ-VECTOR180, 1.01, max UDMA/133 [ 3.521360] ata7.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 3.521406] ata7.00: SB600 AHCI: limiting to 255 sectors per cmd [ 3.522443] ata7.00: SB600 AHCI: limiting to 255 sectors per cmd [ 3.522490] ata7.00: configured for UDMA/133 [ 3.573130] ata5: softreset failed (device not ready) [ 3.573177] ata5: applying PMP SRST workaround and retrying [ 3.573240] ata6: softreset failed (device not ready) [ 3.573287] ata6: applying PMP SRST workaround and retrying [ 3.679100] [drm] ring test on 5 succeeded in 1 usecs [ 3.679151] [drm] UVD initialized successfully. [ 3.733138] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.733210] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.734479] ata6.00: HPA detected: current 3907020911, native 3907029168 [ 3.734631] ata6.00: ATA-8: Hitachi HDS5C3020ALA632, ML6OA580, max UDMA/133 [ 3.734676] ata6.00: 3907020911 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.734725] ata6.00: SB600 AHCI: limiting to 255 sectors per cmd [ 3.736209] ata6.00: SB600 AHCI: limiting to 255 sectors per cmd [ 3.736255] ata6.00: configured for UDMA/133 [ 3.737122] usb 1-1.1: new full-speed USB device number 4 using ehci-pci [ 3.738726] ata5.00: ATA-8: WDC WD10EARS-00MVWB0, 51.0AB51, max UDMA/133 [ 3.738773] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.738822] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd [ 3.743261] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd [ 3.743307] ata5.00: configured for UDMA/133 [ 3.788406] [drm] ring test on 6 succeeded in 18 usecs [ 3.788465] [drm] ring test on 7 succeeded in 4 usecs [ 3.788508] [drm] VCE initialized successfully. [ 3.788655] [drm] ib test on ring 0 succeeded in 0 usecs [ 3.788731] [drm] ib test on ring 1 succeeded in 0 usecs [ 3.788804] [drm] ib test on ring 2 succeeded in 0 usecs [ 3.788892] [drm] ib test on ring 3 succeeded in 0 usecs [ 3.788978] [drm] ib test on ring 4 succeeded in 0 usecs [ 3.857720] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c042 [ 3.857767] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.857815] usb 1-1.1: Product: USB Gaming Mouse [ 3.857859] usb 1-1.1: Manufacturer: Logitech [ 3.860923] hidraw: raw HID events driver (C) Jiri Kosina [ 3.870963] usbcore: registered new interface driver usbhid [ 3.871010] usbhid: USB HID core driver [ 3.871666] input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:13.5/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C042.0001/input/input1 [ 3.871798] hid-generic 0003:046D:C042.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:13.5-1.1/input0 [ 3.872818] hid-generic 0003:046D:C042.0002: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:13.5-1.1/input1 [ 3.965137] usb 7-1: new full-speed USB device number 2 using ohci-pci [ 3.965139] usb 1-8: new high-speed USB device number 5 using ehci-pci [ 4.117522] usb 1-8: New USB device found, idVendor=05e3, idProduct=070e [ 4.117569] usb 1-8: New USB device strings: Mfr=3, Product=4, SerialNumber=5 [ 4.120169] usb 1-8: Product: USB Reader [ 4.120213] usb 1-8: Manufacturer: Genesys [ 4.120256] usb 1-8: SerialNumber: 000000590523 [ 4.122861] usb-storage 1-8:1.0: USB Mass Storage device detected [ 4.123056] scsi host10: usb-storage 1-8:1.0 [ 4.123169] usbcore: registered new interface driver usb-storage [ 4.123509] usbcore: registered new interface driver uas [ 4.164139] usb 7-1: New USB device found, idVendor=0a5c, idProduct=21e8 [ 4.164186] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.164231] usb 7-1: Product: BCM920702 Bluetooth 4.0 [ 4.164274] usb 7-1: Manufacturer: Broadcom Corp [ 4.164318] usb 7-1: SerialNumber: 5CF3707BF326 [ 4.193124] usb 1-1.2: new low-speed USB device number 6 using ehci-pci [ 4.321298] usb 1-1.2: New USB device found, idVendor=04d9, idProduct=1603 [ 4.321345] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.321393] usb 1-1.2: Product: USB Keyboard [ 4.321436] usb 1-1.2: Manufacturer: [ 4.331906] input: USB Keyboard as /devices/pci0000:00/0000:00:13.5/usb1/1-1/1-1.2/1-1.2:1.0/0003:04D9:1603.0003/input/input2 [ 4.389252] hid-generic 0003:04D9:1603.0003: input,hidraw2: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:13.5-1.2/input0 [ 4.406353] input: USB Keyboard as /devices/pci0000:00/0000:00:13.5/usb1/1-1/1-1.2/1-1.2:1.1/0003:04D9:1603.0004/input/input3 [ 4.421128] usb 1-9: new high-speed USB device number 7 using ehci-pci [ 4.461159] [drm] ib test on ring 5 succeeded [ 4.461229] clocksource: Switched to clocksource tsc [ 4.465165] hid-generic 0003:04D9:1603.0004: input,hidraw3: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:13.5-1.2/input1 [ 4.572950] usb 1-9: New USB device found, idVendor=05e3, idProduct=0716 [ 4.572997] usb 1-9: New USB device strings: Mfr=0, Product=1, SerialNumber=2 [ 4.573041] usb 1-9: Product: USB Storage [ 4.573085] usb 1-9: SerialNumber: 000000009744 [ 4.573726] usb-storage 1-9:1.0: USB Mass Storage device detected [ 4.573859] scsi host11: usb-storage 1-9:1.0 [ 4.917131] ata1: SATA link down (SStatus 0 SControl 0) [ 4.973141] [drm] ib test on ring 6 succeeded [ 5.134285] scsi 10:0:0:0: Direct-Access Generic STORAGE DEVICE 9325 PQ: 0 ANSI: 0 [ 5.135161] scsi 10:0:0:1: Direct-Access Generic STORAGE DEVICE 9325 PQ: 0 ANSI: 0 [ 5.139120] random: fast init done [ 5.139389] sd 10:0:0:0: [sda] Attached SCSI removable disk [ 5.140013] sd 10:0:0:1: [sdb] Attached SCSI removable disk [ 5.485144] [drm] ib test on ring 7 succeeded [ 5.485219] [drm] hw_i2c forced on, you may experience display detection problems! [ 5.485507] [drm] forcing HDMI-A-1 connector OFF [ 5.485598] [drm] forcing DVI-D-1 connector ON [ 5.485676] [drm] forcing VGA-1 connector OFF [ 5.485743] [drm] Radeon Display Connectors [ 5.485786] [drm] Connector 0: [ 5.485829] [drm] HDMI-A-1 [ 5.485871] [drm] HPD1 [ 5.485914] [drm] DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578 0x657c 0x657c [ 5.485962] [drm] Encoders: [ 5.486004] [drm] DFP1: INTERNAL_UNIPHY2 [ 5.486047] [drm] Connector 1: [ 5.486089] [drm] DVI-D-1 [ 5.486132] [drm] HPD2 [ 5.486175] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c [ 5.486222] [drm] Encoders: [ 5.486265] [drm] DFP2: INTERNAL_UNIPHY [ 5.486307] [drm] Connector 2: [ 5.486350] [drm] VGA-1 [ 5.486392] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c [ 5.486440] [drm] Encoders: [ 5.486482] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 5.517096] [drm] fb mappable at 0xD05D9000 [ 5.517139] [drm] vram apper at 0xD0000000 [ 5.517182] [drm] size 2457600 [ 5.517225] [drm] fb depth is 8 [ 5.517267] [drm] pitch is 2048 [ 5.517376] fbcon: radeondrmfb (fb0) is primary device [ 5.572944] Console: switching to colour frame buffer device 240x75 [ 5.574467] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [ 5.582461] scsi 11:0:0:0: Direct-Access Generic STORAGE DEVICE 9744 PQ: 0 ANSI: 0 [ 5.583336] scsi 11:0:0:1: Direct-Access Generic STORAGE DEVICE 9744 PQ: 0 ANSI: 0 [ 5.591698] sd 11:0:0:0: [sdc] Attached SCSI removable disk [ 5.592329] sd 11:0:0:1: [sdd] Attached SCSI removable disk [ 5.593474] [drm] Initialized radeon 2.48.0 20080528 for 0000:01:00.0 on minor 0 [ 7.097288] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 7.098176] ata2.00: HPA detected: current 312579695, native 312581808 [ 7.098195] ata2.00: ATA-7: Hitachi HDS721616PLA380, P22OABEA, max UDMA/133 [ 7.098205] ata2.00: 312579695 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 7.099255] ata2.00: configured for UDMA/100 [ 7.099452] scsi 1:0:0:0: Direct-Access ATA Hitachi HDS72161 ABEA PQ: 0 ANSI: 5 [ 7.129293] sd 1:0:0:0: [sde] 312579695 512-byte logical blocks: (160 GB/149 GiB) [ 7.129411] sd 1:0:0:0: [sde] Write Protect is off [ 7.129424] sd 1:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 7.129453] sd 1:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.151580] sd 1:0:0:0: [sde] Attached SCSI disk [ 9.309288] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 9.310172] ata3.00: HPA detected: current 312579695, native 312581808 [ 9.310187] ata3.00: ATA-7: Hitachi HDS721616PLA380, P22OABEA, max UDMA/133 [ 9.310197] ata3.00: 312579695 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 9.311246] ata3.00: configured for UDMA/100 [ 9.311422] scsi 2:0:0:0: Direct-Access ATA Hitachi HDS72161 ABEA PQ: 0 ANSI: 5 [ 9.341303] sd 2:0:0:0: [sdf] 312579695 512-byte logical blocks: (160 GB/149 GiB) [ 9.341403] sd 2:0:0:0: [sdf] Write Protect is off [ 9.341416] sd 2:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 9.341446] sd 2:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.369882] sd 2:0:0:0: [sdf] Attached SCSI disk [ 11.393137] ata4: SATA link down (SStatus 0 SControl 0) [ 11.393334] scsi 4:0:0:0: Direct-Access ATA WDC WD10EARS-00M AB51 PQ: 0 ANSI: 5 [ 11.425292] sd 4:0:0:0: [sdg] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 11.425307] sd 4:0:0:0: [sdg] 4096-byte physical blocks [ 11.425410] sd 4:0:0:0: [sdg] Write Protect is off [ 11.425422] sd 4:0:0:0: [sdg] Mode Sense: 00 3a 00 00 [ 11.425438] scsi 5:0:0:0: Direct-Access ATA Hitachi HDS5C302 A580 PQ: 0 ANSI: 5 [ 11.425449] sd 4:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.442088] sdg: sdg1 sdg2 sdg3 [ 11.442481] sd 4:0:0:0: [sdg] Attached SCSI disk [ 11.457273] sd 5:0:0:0: [sdh] 3907020911 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 11.457368] sd 5:0:0:0: [sdh] Write Protect is off [ 11.457380] sd 5:0:0:0: [sdh] Mode Sense: 00 3a 00 00 [ 11.457399] scsi 6:0:0:0: Direct-Access ATA OCZ-VECTOR180 1.01 PQ: 0 ANSI: 5 [ 11.457409] sd 5:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.489283] sd 6:0:0:0: [sdi] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 11.489407] sd 6:0:0:0: [sdi] Write Protect is off [ 11.489419] sd 6:0:0:0: [sdi] Mode Sense: 00 3a 00 00 [ 11.489444] sd 6:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.489892] scsi 8:0:0:0: CD-ROM ASUS DRW-1814BL 1.14 PQ: 0 ANSI: 5 [ 11.490207] sdi: sdi1 sdi2 [ 11.490561] sd 6:0:0:0: [sdi] Attached SCSI disk [ 11.498525] sdh: sdh1 sdh2 sdh3 sdh4 [ 11.498932] sd 5:0:0:0: [sdh] Attached SCSI disk [ 11.519205] sr 8:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 11.519226] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 11.519942] sr 8:0:0:0: Attached scsi CD-ROM sr0 [ 11.524854] md: bind [ 11.568599] device-mapper: uevent: version 1.0.3 [ 11.569257] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 11.570959] bcache: bch_journal_replay() journal replay done, 222 keys in 18 entries, seq 277165 [ 11.572529] bcache: register_cache() registered cache device sdi1 [ 11.665956] md: bind [ 11.667876] md: raid1 personality registered for level 1 [ 11.668677] md/raid1:md127: active with 2 out of 2 mirrors [ 11.669393] created bitmap (1 pages) for device md127 [ 11.670063] md127: bitmap initialized from disk: read 1 pages, set 0 of 1724 bits [ 11.736285] md127: detected capacity change from 0 to 115670974464 [ 11.737148] md127: p1 p2 p3 [ 11.757297] bcache: register_bdev() registered backing device sdg1 [ 11.799462] bcache: bch_cached_dev_attach() Caching sdg1 as bcache0 on set 83bdeae1-6390-4435-ae29-c31616227bc7 [ 11.977678] random: crng init done [ 12.452269] md: linear personality registered for level -1 [ 12.454108] md: multipath personality registered for level -4 [ 12.456055] md: raid0 personality registered for level 0 [ 12.569125] raid6: sse2x1 gen() 3834 MB/s [ 12.637114] raid6: sse2x1 xor() 4277 MB/s [ 12.705118] raid6: sse2x2 gen() 6483 MB/s [ 12.773113] raid6: sse2x2 xor() 7282 MB/s [ 12.841126] raid6: sse2x4 gen() 6869 MB/s [ 12.909114] raid6: sse2x4 xor() 4560 MB/s [ 12.909704] raid6: using algorithm sse2x4 gen() 6869 MB/s [ 12.910293] raid6: .... xor() 4560 MB/s, rmw enabled [ 12.910879] raid6: using intx1 recovery algorithm [ 12.911670] xor: measuring software checksum speed [ 12.949118] prefetch64-sse: 12256.000 MB/sec [ 12.989118] generic_sse: 11646.000 MB/sec [ 12.989702] xor: using function: prefetch64-sse (12256.000 MB/sec) [ 12.990524] async_tx: api initialized (async) [ 12.992379] md: raid6 personality registered for level 6 [ 12.993048] md: raid5 personality registered for level 5 [ 12.993642] md: raid4 personality registered for level 4 [ 12.997315] md: raid10 personality registered for level 10 [ 13.296939] Btrfs loaded, crc32c=crc32c-generic [ 13.381140] blk_update_request: I/O error, dev fd0, sector 0 [ 13.381735] floppy: error -5 while reading block 0 [ 13.969467] BTRFS: device label home devid 1 transid 3289 /dev/md127p3 [ 13.970161] BTRFS: device label srv devid 2 transid 174 /dev/sdh3 [ 13.970845] BTRFS: device label srv devid 1 transid 174 /dev/sdg3 [ 13.973330] PM: Starting manual resume from disk [ 13.973900] PM: Hibernation image partition 8:113 present [ 13.973901] PM: Looking for hibernation image. [ 13.974044] PM: Image not found (code -22) [ 13.974045] PM: Hibernation image not present or could not be loaded. [ 14.106664] EXT4-fs (md127p2): mounted filesystem with ordered data mode. Opts: (null) [ 14.218213] ip_tables: (C) 2000-2006 Netfilter Core Team [ 14.222074] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 14.222750] systemd[1]: Detected architecture x86-64. [ 14.225414] systemd[1]: Set hostname to . [ 14.286478] systemd[1]: Listening on Journal Socket. [ 14.287772] systemd[1]: Listening on udev Control Socket. [ 14.289009] systemd[1]: Listening on Journal Audit Socket. [ 14.290299] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 14.291525] systemd[1]: Listening on Journal Socket (/dev/log). [ 14.292753] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 14.294089] systemd[1]: Created slice System Slice. [ 14.306823] it87: Found IT8716F chip at 0x228, revision 0 [ 14.306844] it87: Beeping is supported [ 14.316148] EXT4-fs (md127p2): re-mounted. Opts: errors=remount-ro [ 14.402136] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4 [ 14.402714] ACPI: Power Button [PWRB] [ 14.403335] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 14.403916] ACPI: Power Button [PWRF] [ 14.408675] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] [ 14.410139] acpi_cpufreq: overriding BIOS provided _PSD data [ 14.416712] sd 10:0:0:0: Attached scsi generic sg0 type 0 [ 14.417708] sd 10:0:0:1: Attached scsi generic sg1 type 0 [ 14.418316] sd 11:0:0:0: Attached scsi generic sg2 type 0 [ 14.418928] sd 11:0:0:1: Attached scsi generic sg3 type 0 [ 14.419589] sd 1:0:0:0: Attached scsi generic sg4 type 0 [ 14.420408] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 14.421028] sd 2:0:0:0: Attached scsi generic sg5 type 0 [ 14.422592] sd 4:0:0:0: Attached scsi generic sg6 type 0 [ 14.423740] sd 5:0:0:0: Attached scsi generic sg7 type 0 [ 14.424411] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05 [ 14.424697] sd 6:0:0:0: Attached scsi generic sg8 type 0 [ 14.424748] sr 8:0:0:0: Attached scsi generic sg9 type 5 [ 14.426300] sp5100_tco: PCI Vendor ID: 0x1002, Device ID: 0x4385, Revision ID: 0x14 [ 14.426871] sp5100_tco: failed to find MMIO address, giving up. [ 14.459472] snd_hda_intel 0000:00:14.2: position_fix set to 1 for device 1458:a022 [ 14.460455] snd_hda_intel: probe of 0000:01:00.1 failed with error -2 [ 14.485265] snd_hda_codec_realtek hdaudioC0D3: autoconfig for ALC889A: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 14.485838] snd_hda_codec_realtek hdaudioC0D3: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 14.486396] snd_hda_codec_realtek hdaudioC0D3: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 14.486922] snd_hda_codec_realtek hdaudioC0D3: mono: mono_out=0x0 [ 14.487439] snd_hda_codec_realtek hdaudioC0D3: dig-out=0x1e/0x0 [ 14.487941] snd_hda_codec_realtek hdaudioC0D3: inputs: [ 14.488439] snd_hda_codec_realtek hdaudioC0D3: Rear Mic=0x18 [ 14.488949] snd_hda_codec_realtek hdaudioC0D3: Front Mic=0x19 [ 14.489466] snd_hda_codec_realtek hdaudioC0D3: Line=0x1a [ 14.489991] snd_hda_codec_realtek hdaudioC0D3: CD=0x1c [ 14.490177] snd_ice1712 0000:06:07.0: Using board model TerraTec DMX6Fire [ 14.490985] snd_hda_codec_realtek hdaudioC0D3: dig-in=0x1f [ 14.507492] Bluetooth: Core ver 2.22 [ 14.508013] NET: Registered protocol family 31 [ 14.508493] Bluetooth: HCI device and connection manager initialized [ 14.508968] Bluetooth: HCI socket layer initialized [ 14.511338] Bluetooth: L2CAP socket layer initialized [ 14.512165] Bluetooth: SCO socket layer initialized [ 14.517683] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 14.521043] usbcore: registered new interface driver btusb [ 14.530275] Bluetooth: hci0: BCM: chip id 63 [ 14.531835] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 [ 14.533937] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 [ 14.534503] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 [ 14.535073] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 [ 14.535638] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11 [ 14.536246] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input12 [ 14.536800] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input13 [ 14.538790] bcache: register_bcache() error opening /dev/sdg1: device already registered [ 14.549307] Bluetooth: hci0: c21 [ 14.551373] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1338 [ 14.552780] bluetooth hci0: firmware: direct-loading firmware brcm/BCM20702A1-0a5c-21e8.hcd [ 14.554066] kvm: Nested Virtualization enabled [ 14.554590] kvm: Nested Paging enabled [ 14.557603] EDAC MC: Ver: 3.0.0 [ 14.558989] bcache: register_bcache() error opening /dev/sdi1: device already registered [ 14.560914] MCE: In-kernel MCE decoding enabled. [ 14.562535] EDAC amd64: DRAM ECC disabled. [ 14.563040] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 14.602687] ppdev: user-space parallel port driver [ 14.603346] EDAC amd64: DRAM ECC disabled. [ 14.603997] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 15.188907] Adding 16777212k swap on /dev/sdh1. Priority:-1 extents:1 across:16777212k FS [ 15.347208] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1338 [ 15.366194] Bluetooth: hci0: Broadcom Bluetooth Device [ 15.389882] BTRFS info (device md127p3): use ssd allocation scheme [ 15.390704] BTRFS info (device md127p3): use lzo compression [ 15.390706] BTRFS info (device md127p3): disk space caching is enabled [ 15.390707] BTRFS info (device md127p3): has skinny extents [ 15.431388] EXT4-fs (bcache0): mounted filesystem with ordered data mode. Opts: (null) [ 15.455247] systemd-journald[423]: Received request to flush runtime journal from PID 1 [ 15.456994] EXT4-fs (md127p1): mounted filesystem with ordered data mode. Opts: (null) [ 15.549810] BTRFS info (device sdg3): disk space caching is enabled [ 15.551856] BTRFS info (device sdg3): has skinny extents [ 15.673919] EXT4-fs (sdh2): mounted filesystem without journal. Opts: (null) [ 15.715252] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 15.756160] XFS (sdh4): Mounting V5 Filesystem [ 15.887668] XFS (sdh4): Ending clean mount [ 15.933906] r8169 0000:06:0f.0 enp6s15: link down [ 15.935936] r8169 0000:06:0f.0 enp6s15: link down [ 15.938010] IPv6: ADDRCONF(NETDEV_UP): enp6s15: link is not ready [ 16.135146] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 16.135148] Bluetooth: BNEP filters: protocol multicast [ 16.135156] Bluetooth: BNEP socket layer initialized [ 19.335519] r8169 0000:06:0f.0 enp6s15: link up [ 19.337439] IPv6: ADDRCONF(NETDEV_CHANGE): enp6s15: link becomes ready [ 266.470363] ata2.00: exception Emask 0x20 SAct 0x3 SErr 0x0 action 0x6 frozen [ 266.472190] ata2.00: irq_stat 0x00020002, PCI master abort while transferring data [ 266.474022] ata2.00: failed command: READ FPDMA QUEUED [ 266.475827] ata2.00: cmd 60/00:00:f0:bb:0e/01:00:00:00:00/40 tag 0 ncq dma 131072 in res 60/00:00:f0:bb:0e/00:00:00:00:00/40 Emask 0x21 (host bus error) [ 266.479401] ata2.00: status: { DRDY DF } [ 266.481180] ata2.00: failed command: READ FPDMA QUEUED [ 266.482964] ata2.00: cmd 60/00:08:f0:ba:0e/01:00:00:00:00/40 tag 1 ncq dma 131072 in res 40/25:02:02:00:00/00:00:40:10:40/00 Emask 0x20 (host bus error) [ 266.486912] ata2.00: status: { DRDY } [ 266.488711] ata2.00: error: { AMNF ABRT } [ 266.490524] ata2: hard resetting link [ 266.492295] ata2: controller in dubious state, performing PORT_RST [ 268.693624] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 268.697455] ata2.00: configured for UDMA/100 [ 268.699297] ata2: EH complete [ 268.834440] ata2.00: exception Emask 0x20 SAct 0x3 SErr 0x0 action 0x6 frozen [ 268.836245] ata2.00: irq_stat 0x00020002, PCI master abort while transferring data [ 268.838063] ata2.00: failed command: READ FPDMA QUEUED [ 268.839843] ata2.00: cmd 60/00:00:f0:ba:0e/01:00:00:00:00/40 tag 0 ncq dma 131072 in res 40/25:02:02:00:00/00:00:40:00:40/00 Emask 0x20 (host bus error) [ 268.843421] ata2.00: status: { DRDY } [ 268.845213] ata2.00: error: { AMNF ABRT } [ 268.847013] ata2.00: failed command: READ FPDMA QUEUED [ 268.848794] ata2.00: cmd 60/00:08:f0:bb:0e/01:00:00:00:00/40 tag 1 ncq dma 131072 in res 40/25:02:02:00:00/00:00:00:10:40/00 Emask 0x20 (host bus error) [ 268.852416] ata2.00: status: { DRDY } [ 268.854236] ata2.00: error: { AMNF ABRT } [ 268.856027] ata2: hard resetting link [ 268.857801] ata2: controller in dubious state, performing PORT_RST [ 271.057626] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 271.061485] ata2.00: configured for UDMA/100 [ 271.063319] ata2: EH complete [ 271.202443] ata2.00: exception Emask 0x20 SAct 0x3 SErr 0x0 action 0x6 frozen [ 271.204249] ata2.00: irq_stat 0x00020002, PCI master abort while transferring data [ 271.206073] ata2.00: failed command: READ FPDMA QUEUED [ 271.207870] ata2.00: cmd 60/00:00:f0:bb:0e/01:00:00:00:00/40 tag 0 ncq dma 131072 in res 40/25:02:02:00:00/00:00:00:00:40/00 Emask 0x20 (host bus error) [ 271.211530] ata2.00: status: { DRDY } [ 271.213363] ata2.00: error: { AMNF ABRT } [ 271.215189] ata2.00: failed command: READ FPDMA QUEUED [ 271.217016] ata2.00: cmd 60/00:08:f0:ba:0e/01:00:00:00:00/40 tag 1 ncq dma 131072 in res 40/25:02:02:00:00/00:00:00:10:40/00 Emask 0x20 (host bus error) [ 271.220715] ata2.00: status: { DRDY } [ 271.222581] ata2.00: error: { AMNF ABRT } [ 271.224427] ata2: hard resetting link [ 271.226281] ata2: controller in dubious state, performing PORT_RST [ 273.425629] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 273.429528] ata2.00: configured for UDMA/100 [ 273.431416] ata2: EH complete [ 273.566425] ata2.00: exception Emask 0x20 SAct 0x3 SErr 0x0 action 0x6 frozen [ 273.568314] ata2.00: irq_stat 0x00020002, PCI master abort while transferring data [ 273.570224] ata2.00: failed command: READ FPDMA QUEUED [ 273.572099] ata2.00: cmd 60/00:00:f0:ba:0e/01:00:00:00:00/40 tag 0 ncq dma 131072 in res 40/25:02:02:00:00/00:00:40:00:40/00 Emask 0x20 (host bus error) [ 273.575879] ata2.00: status: { DRDY } [ 273.577806] ata2.00: error: { AMNF ABRT } [ 273.580071] ata2.00: failed command: READ FPDMA QUEUED [ 273.581984] ata2.00: cmd 60/00:08:f0:bb:0e/01:00:00:00:00/40 tag 1 ncq dma 131072 in res 40/25:02:02:00:00/00:00:00:10:40/00 Emask 0x20 (host bus error) [ 273.585815] ata2.00: status: { DRDY } [ 273.587706] ata2.00: error: { AMNF ABRT } [ 273.589596] ata2: hard resetting link [ 273.591468] ata2: controller in dubious state, performing PORT_RST [ 275.793629] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 275.797567] ata2.00: configured for UDMA/100 [ 275.799496] ata2: EH complete [ 275.934436] ata2.00: exception Emask 0x20 SAct 0x3 SErr 0x0 action 0x6 frozen [ 275.936386] ata2.00: irq_stat 0x00020002, PCI master abort while transferring data [ 275.938361] ata2.00: failed command: READ FPDMA QUEUED [ 275.940330] ata2.00: cmd 60/00:00:f0:bb:0e/01:00:00:00:00/40 tag 0 ncq dma 131072 in res 40/25:02:02:00:00/00:00:00:00:40/00 Emask 0x20 (host bus error) [ 275.944329] ata2.00: status: { DRDY } [ 275.946355] ata2.00: error: { AMNF ABRT } [ 275.948346] ata2.00: failed command: READ FPDMA QUEUED [ 275.950347] ata2.00: cmd 60/00:08:f0:ba:0e/01:00:00:00:00/40 tag 1 ncq dma 131072 in res 40/25:02:02:00:00/00:00:00:10:40/00 Emask 0x20 (host bus error) [ 275.954345] ata2.00: status: { DRDY } [ 275.956330] ata2.00: error: { AMNF ABRT } [ 275.958324] ata2: hard resetting link [ 275.960284] ata2: controller in dubious state, performing PORT_RST [ 278.161633] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 278.165627] ata2.00: configured for UDMA/100 [ 278.167609] ata2: EH complete [ 278.310432] ata2.00: exception Emask 0x20 SAct 0x3 SErr 0x0 action 0x6 frozen [ 278.312407] ata2.00: irq_stat 0x00020002, PCI master abort while transferring data [ 278.314397] ata2.00: failed command: READ FPDMA QUEUED [ 278.316365] ata2.00: cmd 60/00:00:f0:ba:0e/01:00:00:00:00/40 tag 0 ncq dma 131072 in res 40/25:02:02:00:00/00:00:40:00:40/00 Emask 0x20 (host bus error) [ 278.320315] ata2.00: status: { DRDY } [ 278.322304] ata2.00: error: { AMNF ABRT } [ 278.324279] ata2.00: failed command: READ FPDMA QUEUED [ 278.326268] ata2.00: cmd 60/00:08:f0:bb:0e/01:00:00:00:00/40 tag 1 ncq dma 131072 in res 40/25:02:02:00:00/00:00:00:10:40/00 Emask 0x20 (host bus error) [ 278.330242] ata2.00: status: { DRDY } [ 278.332212] ata2.00: error: { AMNF ABRT } [ 278.334178] ata2: hard resetting link [ 278.336128] ata2: controller in dubious state, performing PORT_RST [ 280.537636] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 280.541646] ata2.00: configured for UDMA/100 [ 280.543627] sd 1:0:0:0: [sde] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 280.545611] sd 1:0:0:0: [sde] tag#0 Sense Key : Medium Error [current] [ 280.547567] sd 1:0:0:0: [sde] tag#0 Add. Sense: Address mark not found for data field [ 280.549548] sd 1:0:0:0: [sde] tag#0 CDB: Read(10) 28 00 00 0e ba f0 00 01 00 00 [ 280.551517] blk_update_request: I/O error, dev sde, sector 965360 [ 280.553542] sd 1:0:0:0: [sde] tag#1 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 280.555901] sd 1:0:0:0: [sde] tag#1 Sense Key : Medium Error [current] [ 280.557924] sd 1:0:0:0: [sde] tag#1 Add. Sense: Address mark not found for data field [ 280.559928] sd 1:0:0:0: [sde] tag#1 CDB: Read(10) 28 00 00 0e bb f0 00 01 00 00 [ 280.561940] blk_update_request: I/O error, dev sde, sector 965616 [ 280.563961] ata2: EH complete [ 8348.620026] ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xe frozen [ 8348.621645] ata1: irq_stat 0x00b40090, PHY RDY changed [ 8348.623295] ata1: hard resetting link [ 8358.626310] ata1: softreset failed (timeout) [ 8358.627924] ata1: hard resetting link [ 8361.391599] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 8361.393811] ata1.00: ATA-8: ST3000DM001-9YN166, CC4H, max UDMA/133 [ 8361.395466] ata1.00: 5860533168 sectors, multi 0: LBA48 [ 8361.397671] ata1.00: configured for UDMA/100 [ 8361.398342] ata1: EH complete [ 8361.399205] scsi 0:0:0:0: Direct-Access ATA ST3000DM001-9YN1 CC4H PQ: 0 ANSI: 5 [ 8361.438676] sd 0:0:0:0: Attached scsi generic sg10 type 0 [ 8361.438689] sd 0:0:0:0: [sdj] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 8361.438694] sd 0:0:0:0: [sdj] 4096-byte physical blocks [ 8361.438888] sd 0:0:0:0: [sdj] Write Protect is off [ 8361.438896] sd 0:0:0:0: [sdj] Mode Sense: 00 3a 00 00 [ 8361.438971] sd 0:0:0:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8361.487871] sdj: sdj1 sdj2 [ 8361.489045] sd 0:0:0:0: [sdj] Attached SCSI disk [10562.688262] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [10562.689701] ata1.00: irq_stat 0x00060002, PCI master abort while transferring data [10562.691127] ata1.00: failed command: READ DMA [10562.692609] ata1.00: cmd c8/00:00:e0:d3:d3/00:00:00:00:00/e0 tag 0 dma 131072 in res b8/20:02:02:00:00/00:00:00:00:b8/00 Emask 0x22 (host bus error) [10562.695565] ata1.00: status: { Busy } [10562.697060] ata1: hard resetting link [10562.698547] ata1: controller in dubious state, performing PORT_RST [10564.889203] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [10564.891970] ata1.00: configured for UDMA/100 [10564.893545] ata1: EH complete [10565.028037] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [10565.029608] ata1.00: irq_stat 0x00020002, PCI master abort while transferring data [10565.031207] ata1.00: failed command: READ DMA [10565.032784] ata1.00: cmd c8/00:00:e0:d3:d3/00:00:00:00:00/e0 tag 0 dma 131072 in res b8/20:02:02:00:00/00:00:00:00:b8/00 Emask 0x22 (host bus error) [10565.035952] ata1.00: status: { Busy } [10565.037543] ata1: hard resetting link [10565.039140] ata1: controller in dubious state, performing PORT_RST [10567.228972] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [10567.231793] ata1.00: configured for UDMA/100 [10567.233456] ata1: EH complete [10567.368096] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [10567.369692] ata1.00: irq_stat 0x00020002, PCI master abort while transferring data [10567.371315] ata1.00: failed command: READ DMA [10567.372995] ata1.00: cmd c8/00:00:e0:d3:d3/00:00:00:00:00/e0 tag 0 dma 131072 in res b8/20:02:02:00:00/00:00:00:00:b8/00 Emask 0x22 (host bus error) [10567.376224] ata1.00: status: { Busy } [10567.377851] ata1: hard resetting link [10567.379492] ata1: controller in dubious state, performing PORT_RST [10569.568810] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [10569.571690] ata1.00: configured for UDMA/100 [10569.573371] ata1: EH complete [10569.707698] ata1: limiting SATA link speed to 1.5 Gbps [10569.709374] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [10569.711087] ata1.00: irq_stat 0x00020002, PCI master abort while transferring data [10569.712777] ata1.00: failed command: READ DMA [10569.714466] ata1.00: cmd c8/00:00:e0:d3:d3/00:00:00:00:00/e0 tag 0 dma 131072 in res b8/20:02:02:00:00/00:00:00:00:b8/00 Emask 0x22 (host bus error) [10569.717913] ata1.00: status: { Busy } [10569.719683] ata1: hard resetting link [10569.721770] ata1: controller in dubious state, performing PORT_RST [10571.912619] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10) [10571.915665] ata1.00: configured for UDMA/100 [10571.917481] ata1: EH complete [10572.051552] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [10572.053372] ata1.00: irq_stat 0x00020002, PCI master abort while transferring data [10572.055229] ata1.00: failed command: READ DMA [10572.057046] ata1.00: cmd c8/00:00:e0:d3:d3/00:00:00:00:00/e0 tag 0 dma 131072 in res b8/20:02:02:00:00/00:00:00:00:b8/00 Emask 0x22 (host bus error) [10572.060734] ata1.00: status: { Busy } [10572.062609] ata1: hard resetting link [10572.064484] ata1: controller in dubious state, performing PORT_RST [10574.257205] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10) [10574.260335] ata1.00: configured for UDMA/100 [10574.262294] ata1: EH complete [10574.399322] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [10574.401276] ata1.00: irq_stat 0x00020002, PCI master abort while transferring data [10574.403257] ata1.00: failed command: READ DMA [10574.405205] ata1.00: cmd c8/00:00:e0:d3:d3/00:00:00:00:00/e0 tag 0 dma 131072 in res b8/20:02:02:00:00/00:00:00:00:b8/00 Emask 0x22 (host bus error) [10574.409144] ata1.00: status: { Busy } [10574.411542] ata1: hard resetting link [10574.413555] ata1: controller in dubious state, performing PORT_RST [10576.604232] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10) [10576.607520] ata1.00: configured for UDMA/100 [10576.609563] sd 0:0:0:0: [sdj] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [10576.611611] sd 0:0:0:0: [sdj] tag#0 Sense Key : Aborted Command [current] [10576.613654] sd 0:0:0:0: [sdj] tag#0 Add. Sense: Scsi parity error [10576.616047] sd 0:0:0:0: [sdj] tag#0 CDB: Read(16) 88 00 00 00 00 00 00 d3 d3 e0 00 00 01 00 00 00 [10576.618148] blk_update_request: I/O error, dev sdj, sector 13882336 [10576.620285] ata1: EH complete [10576.759123] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [10576.761194] ata1.00: irq_stat 0x00020002, PCI master abort while transferring data [10576.763277] ata1.00: failed command: READ DMA [10576.765334] ata1.00: cmd c8/00:00:e0:d4:d3/00:00:00:00:00/e0 tag 0 dma 131072 in res b8/20:02:02:00:00/00:00:00:00:b8/00 Emask 0x22 (host bus error) [10576.769458] ata1.00: status: { Busy } [10576.771537] ata1: hard resetting link [10576.773567] ata1: controller in dubious state, performing PORT_RST [10578.964029] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10) [10578.967309] ata1.00: configured for UDMA/100 [10578.969352] ata1: EH complete [10579.102837] ata1.00: limiting speed to UDMA/66:PIO4 [10579.104858] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [10579.106911] ata1.00: irq_stat 0x00020002, PCI master abort while transferring data [10579.108930] ata1.00: failed command: READ DMA [10579.110962] ata1.00: cmd c8/00:00:e0:d4:d3/00:00:00:00:00/e0 tag 0 dma 131072 in res b8/20:02:02:00:00/00:00:00:00:b8/00 Emask 0x22 (host bus error) [10579.115015] ata1.00: status: { Busy } [10579.117024] ata1: hard resetting link [10579.119025] ata1: controller in dubious state, performing PORT_RST [10581.307818] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10) [10581.311119] ata1.00: configured for UDMA/66 [10581.313168] ata1: EH complete [10581.450700] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [10581.452739] ata1.00: irq_stat 0x00020002, PCI master abort while transferring data [10581.454797] ata1.00: failed command: READ DMA [10581.456811] ata1.00: cmd c8/00:00:e0:d4:d3/00:00:00:00:00/e0 tag 0 dma 131072 in res b8/20:02:02:00:00/00:00:00:00:b8/00 Emask 0x22 (host bus error) [10581.460858] ata1.00: status: { Busy } [10581.462922] ata1: hard resetting link [10581.464926] ata1: controller in dubious state, performing PORT_RST [10583.655637] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10) [10583.658911] ata1.00: configured for UDMA/66 [10583.660997] ata1: EH complete [10583.794492] ata1.00: limiting speed to UDMA/33:PIO4 [10583.796511] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [10583.798564] ata1.00: irq_stat 0x00020002, PCI master abort while transferring data [10583.800583] ata1.00: failed command: READ DMA [10583.802618] ata1.00: cmd c8/00:00:e0:d4:d3/00:00:00:00:00/e0 tag 0 dma 131072 in res b8/20:02:02:00:00/00:00:00:00:b8/00 Emask 0x22 (host bus error) [10583.806679] ata1.00: status: { Busy } [10583.809058] ata1: hard resetting link [10583.811090] ata1: controller in dubious state, performing PORT_RST [10585.999405] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10) [10586.002714] ata1.00: configured for UDMA/33 [10586.004761] ata1: EH complete [10586.142263] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [10586.144308] ata1.00: irq_stat 0x00020002, PCI master abort while transferring data [10586.146368] ata1.00: failed command: READ DMA [10586.148404] ata1.00: cmd c8/00:00:e0:d4:d3/00:00:00:00:00/e0 tag 0 dma 131072 in res b8/20:02:02:00:00/00:00:00:00:b8/00 Emask 0x22 (host bus error) [10586.152495] ata1.00: status: { Busy } [10586.154561] ata1: hard resetting link [10586.156566] ata1: controller in dubious state, performing PORT_RST [10588.347248] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10) [10588.350519] ata1.00: configured for UDMA/33 [10588.352550] ata1: EH complete [10588.494107] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [10588.496144] ata1.00: irq_stat 0x00020002, PCI master abort while transferring data [10588.498202] ata1.00: failed command: READ DMA [10588.500218] ata1.00: cmd c8/00:00:e0:d4:d3/00:00:00:00:00/e0 tag 0 dma 131072 in res b8/20:02:02:00:00/00:00:00:00:b8/00 Emask 0x22 (host bus error) [10588.504272] ata1.00: status: { Busy } [10588.506335] ata1: hard resetting link [10588.508342] ata1: controller in dubious state, performing PORT_RST [10590.699055] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 10) [10590.702324] ata1.00: configured for UDMA/33 [10590.704363] sd 0:0:0:0: [sdj] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [10590.706425] sd 0:0:0:0: [sdj] tag#0 Sense Key : Aborted Command [current] [10590.708464] sd 0:0:0:0: [sdj] tag#0 Add. Sense: Scsi parity error [10590.710512] sd 0:0:0:0: [sdj] tag#0 CDB: Read(16) 88 00 00 00 00 00 00 d3 d4 e0 00 00 01 00 00 00 [10590.712560] blk_update_request: I/O error, dev sdj, sector 13882592 [10590.714663] ata1: EH complete --- drivers/ata/sata_sil24.c.orig 2017-01-09 08:32:38.000000000 +0100 +++ drivers/ata/sata_sil24.c 2017-01-13 23:44:58.378675018 +0100 @@ -1313,15 +1313,4 @@ /* configure and activate the device */ - if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) { - rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); - if (rc) { - rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); - if (rc) { - dev_err(&pdev->dev, - "64-bit DMA enable failed\n"); - return rc; - } - } - } else { rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); if (rc) { @@ -1335,5 +1324,4 @@ return rc; } - } /* Set max read request size to 4096. This slightly increases