diff mbox series

[v1,3/4] arm64: tegra: Enable AHCI on Jetson TX2

Message ID 1604628968-1501-4-git-send-email-skomatineni@nvidia.com
State New
Headers show
Series Add AHCI support for Tegra186 | expand

Commit Message

Sowjanya Komatineni Nov. 6, 2020, 2:16 a.m. UTC
This patch enables AHCI on Jetson TX2.

Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
---
 arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts |  4 ++++
 arch/arm64/boot/dts/nvidia/tegra186.dtsi           | 28 ++++++++++++++++++++++
 2 files changed, 32 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
index 381a84912..7e1723e 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
@@ -297,6 +297,10 @@ 
 		};
 	};
 
+	sata@3507000 {
+		status = "okay";
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index 0c46ab7..7f5c002 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -1501,6 +1501,34 @@ 
 		};
 	};
 
+	sata@3507000 {
+		compatible = "nvidia,tegra186-ahci";
+		reg = <0x0 0x03507000 0x0 0x00002000>, /* AHCI */
+		      <0x0 0x03500000 0x0 0x00007000>, /* SATA */
+		      <0x0 0x03A90000 0x0 0x00010000>; /* SATA AUX */
+		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+
+		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_SAX>;
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_SATAR &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_SATAW &emc>;
+		interconnect-names = "dma-mem", "write";
+		iommus = <&smmu TEGRA186_SID_SATA>;
+
+		clocks = <&bpmp TEGRA186_CLK_SATA>,
+			 <&bpmp TEGRA186_CLK_SATA_OOB>;
+		clock-names = "sata", "sata-oob";
+		assigned-clocks = <&bpmp TEGRA186_CLK_SATA>,
+				  <&bpmp TEGRA186_CLK_SATA_OOB>;
+		assigned-clock-parents = <&bpmp TEGRA186_CLK_PLLP_OUT0>,
+					 <&bpmp TEGRA186_CLK_PLLP>;
+		assigned-clock-rates = <102000000>,
+				       <204000000>;
+		resets = <&bpmp TEGRA186_RESET_SATA>,
+			<&bpmp TEGRA186_RESET_SATACOLD>;
+		reset-names = "sata", "sata-cold";
+		status = "disabled";
+	};
+
 	bpmp: bpmp {
 		compatible = "nvidia,tegra186-bpmp";
 		interconnects = <&mc TEGRA186_MEMORY_CLIENT_BPMPR &emc>,