From patchwork Tue Apr 14 05:23:25 2015 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Daniel Axtens X-Patchwork-Id: 461036 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 1E38414027F for ; Tue, 14 Apr 2015 15:24:33 +1000 (AEST) Authentication-Results: ozlabs.org; dkim=fail reason="verification failed; unprotected key" header.d=axtens.net header.i=@axtens.net header.b=bB07ytX9; dkim-adsp=none (unprotected policy); dkim-atps=neutral Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1750992AbbDNFYM (ORCPT ); Tue, 14 Apr 2015 01:24:12 -0400 Received: from mail-pd0-f182.google.com ([209.85.192.182]:33346 "EHLO mail-pd0-f182.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751900AbbDNFYG (ORCPT ); Tue, 14 Apr 2015 01:24:06 -0400 Received: by pdbnk13 with SMTP id nk13so131929549pdb.0 for ; Mon, 13 Apr 2015 22:24:05 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=axtens.net; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=gNSdAVs7wJ41Tu2Boht9Tm5JajoYi51cS9oWIu3xAvw=; b=bB07ytX9qJF+ghBRcx7irQsC0UWTQg+CvgHtyo4TLipzxT0lDgbleNIUq77g6/hgLP Zk05f9FZ37QIHejJppDFXzOS1CIVCGqeJsAzfniDtQrvlrEBhqBQryj5ACwsZCs/6D72 f9OJjQ6vCM9466TpK+XhPZpCqDrccQ/D4W7do= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20130820; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=gNSdAVs7wJ41Tu2Boht9Tm5JajoYi51cS9oWIu3xAvw=; b=MjPcAJb8YOvh9C4ZxjiOveXu2hAHwdpp5aPtYiPxloq1LFR6PlDZ6jmbEWFa8utWXc FBcXOOUFHWdMNuXjyZswkbuPYvVS56w6wU0wFQZSxzVHzgJp5aDPvtjOupnqgZYnc57F hJK9BtTU3jhAfEyCjAqbfeRZE3ZlzpokDczDahdqbh1LkcK4ZCmkm1u/kKbdGDU+Ck64 xT2Gewgbzg1XiNQbWHJCTSGPXnrb2GJTpWL6O60H0/le1gxq5jZ5mmT57HoiKTRLnyGP XcCdg5nvXEdIQZXg+zyjoZPTkFhChhDgmzFgA84nBnOo16J9CNKf2M7/DsqB/YtkQjo9 +5sQ== X-Gm-Message-State: ALoCoQkAZ3tcz8fuFWwwXsE5jWHYFylexQjJCQp/9v1iuswRLEjgrOsilEahTMaL8yiQN/pcfaGS X-Received: by 10.68.137.7 with SMTP id qe7mr28309579pbb.40.1428989045334; Mon, 13 Apr 2015 22:24:05 -0700 (PDT) Received: from omicron.ozlabs.ibm.com ([122.99.82.10]) by mx.google.com with ESMTPSA id 4sm8942914pdo.19.2015.04.13.22.24.00 (version=TLSv1.2 cipher=ECDHE-RSA-AES128-SHA bits=128/128); Mon, 13 Apr 2015 22:24:04 -0700 (PDT) From: Daniel Axtens To: linux-kernel@vger.kernel.org Cc: Daniel Axtens , Bartlomiej Zolnierkiewicz , Tejun Heo , "David S. Miller" , linux-ide@vger.kernel.org, Valentin Rothberg , mpe@ellerman.id.au, linuxppc-dev@lists.ozlab.org Subject: [PATCH 2/3] Remove celleb-only SCC PATA drivers Date: Tue, 14 Apr 2015 15:23:25 +1000 Message-Id: <1428989006-5929-2-git-send-email-dja@axtens.net> X-Mailer: git-send-email 2.1.4 In-Reply-To: <1428989006-5929-1-git-send-email-dja@axtens.net> References: <1428989006-5929-1-git-send-email-dja@axtens.net> Sender: linux-ide-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-ide@vger.kernel.org The SCC PATA interface is only used by celleb. celleb has been dropped [1], so drop the drivers. [1] http://patchwork.ozlabs.org/patch/451730/ CC: Bartlomiej Zolnierkiewicz CC: Tejun Heo CC: "David S. Miller" CC: linux-ide@vger.kernel.org CC: Valentin Rothberg CC: mpe@ellerman.id.au CC: linuxppc-dev@lists.ozlab.org Signed-off-by: Daniel Axtens --- drivers/ata/Kconfig | 9 - drivers/ata/Makefile | 1 - drivers/ata/pata_scc.c | 1110 ------------------------------------------------ drivers/ide/Kconfig | 9 - drivers/ide/Makefile | 1 - drivers/ide/scc_pata.c | 887 -------------------------------------- 6 files changed, 2017 deletions(-) delete mode 100644 drivers/ata/pata_scc.c delete mode 100644 drivers/ide/scc_pata.c diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 5f60155..ee5209f 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -729,15 +729,6 @@ config PATA_SC1200 If unsure, say N. -config PATA_SCC - tristate "Toshiba's Cell Reference Set IDE support" - depends on PCI && PPC_CELLEB - help - This option enables support for the built-in IDE controller on - Toshiba Cell Reference Board. - - If unsure, say N. - config PATA_SCH tristate "Intel SCH PATA support" depends on PCI diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index b67e995..40f7865 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -75,7 +75,6 @@ obj-$(CONFIG_PATA_PDC_OLD) += pata_pdc202xx_old.o obj-$(CONFIG_PATA_RADISYS) += pata_radisys.o obj-$(CONFIG_PATA_RDC) += pata_rdc.o obj-$(CONFIG_PATA_SC1200) += pata_sc1200.o -obj-$(CONFIG_PATA_SCC) += pata_scc.o obj-$(CONFIG_PATA_SCH) += pata_sch.o obj-$(CONFIG_PATA_SERVERWORKS) += pata_serverworks.o obj-$(CONFIG_PATA_SIL680) += pata_sil680.o diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c deleted file mode 100644 index 5cd60d6..0000000 --- a/drivers/ata/pata_scc.c +++ /dev/null @@ -1,1110 +0,0 @@ -/* - * Support for IDE interfaces on Celleb platform - * - * (C) Copyright 2006 TOSHIBA CORPORATION - * - * This code is based on drivers/ata/ata_piix.c: - * Copyright 2003-2005 Red Hat Inc - * Copyright 2003-2005 Jeff Garzik - * Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer - * Copyright (C) 1998-2000 Andre Hedrick - * Copyright (C) 2003 Red Hat Inc - * - * and drivers/ata/ahci.c: - * Copyright 2004-2005 Red Hat, Inc. - * - * and drivers/ata/libata-core.c: - * Copyright 2003-2004 Red Hat, Inc. All rights reserved. - * Copyright 2003-2004 Jeff Garzik - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#define DRV_NAME "pata_scc" -#define DRV_VERSION "0.3" - -#define PCI_DEVICE_ID_TOSHIBA_SCC_ATA 0x01b4 - -/* PCI BARs */ -#define SCC_CTRL_BAR 0 -#define SCC_BMID_BAR 1 - -/* offset of CTRL registers */ -#define SCC_CTL_PIOSHT 0x000 -#define SCC_CTL_PIOCT 0x004 -#define SCC_CTL_MDMACT 0x008 -#define SCC_CTL_MCRCST 0x00C -#define SCC_CTL_SDMACT 0x010 -#define SCC_CTL_SCRCST 0x014 -#define SCC_CTL_UDENVT 0x018 -#define SCC_CTL_TDVHSEL 0x020 -#define SCC_CTL_MODEREG 0x024 -#define SCC_CTL_ECMODE 0xF00 -#define SCC_CTL_MAEA0 0xF50 -#define SCC_CTL_MAEC0 0xF54 -#define SCC_CTL_CCKCTRL 0xFF0 - -/* offset of BMID registers */ -#define SCC_DMA_CMD 0x000 -#define SCC_DMA_STATUS 0x004 -#define SCC_DMA_TABLE_OFS 0x008 -#define SCC_DMA_INTMASK 0x010 -#define SCC_DMA_INTST 0x014 -#define SCC_DMA_PTERADD 0x018 -#define SCC_REG_CMD_ADDR 0x020 -#define SCC_REG_DATA 0x000 -#define SCC_REG_ERR 0x004 -#define SCC_REG_FEATURE 0x004 -#define SCC_REG_NSECT 0x008 -#define SCC_REG_LBAL 0x00C -#define SCC_REG_LBAM 0x010 -#define SCC_REG_LBAH 0x014 -#define SCC_REG_DEVICE 0x018 -#define SCC_REG_STATUS 0x01C -#define SCC_REG_CMD 0x01C -#define SCC_REG_ALTSTATUS 0x020 - -/* register value */ -#define TDVHSEL_MASTER 0x00000001 -#define TDVHSEL_SLAVE 0x00000004 - -#define MODE_JCUSFEN 0x00000080 - -#define ECMODE_VALUE 0x01 - -#define CCKCTRL_ATARESET 0x00040000 -#define CCKCTRL_BUFCNT 0x00020000 -#define CCKCTRL_CRST 0x00010000 -#define CCKCTRL_OCLKEN 0x00000100 -#define CCKCTRL_ATACLKOEN 0x00000002 -#define CCKCTRL_LCLKEN 0x00000001 - -#define QCHCD_IOS_SS 0x00000001 - -#define QCHSD_STPDIAG 0x00020000 - -#define INTMASK_MSK 0xD1000012 -#define INTSTS_SERROR 0x80000000 -#define INTSTS_PRERR 0x40000000 -#define INTSTS_RERR 0x10000000 -#define INTSTS_ICERR 0x01000000 -#define INTSTS_BMSINT 0x00000010 -#define INTSTS_BMHE 0x00000008 -#define INTSTS_IOIRQS 0x00000004 -#define INTSTS_INTRQ 0x00000002 -#define INTSTS_ACTEINT 0x00000001 - - -/* PIO transfer mode table */ -/* JCHST */ -static const unsigned long JCHSTtbl[2][7] = { - {0x0E, 0x05, 0x02, 0x03, 0x02, 0x00, 0x00}, /* 100MHz */ - {0x13, 0x07, 0x04, 0x04, 0x03, 0x00, 0x00} /* 133MHz */ -}; - -/* JCHHT */ -static const unsigned long JCHHTtbl[2][7] = { - {0x0E, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00}, /* 100MHz */ - {0x13, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00} /* 133MHz */ -}; - -/* JCHCT */ -static const unsigned long JCHCTtbl[2][7] = { - {0x1D, 0x1D, 0x1C, 0x0B, 0x06, 0x00, 0x00}, /* 100MHz */ - {0x27, 0x26, 0x26, 0x0E, 0x09, 0x00, 0x00} /* 133MHz */ -}; - -/* DMA transfer mode table */ -/* JCHDCTM/JCHDCTS */ -static const unsigned long JCHDCTxtbl[2][7] = { - {0x0A, 0x06, 0x04, 0x03, 0x01, 0x00, 0x00}, /* 100MHz */ - {0x0E, 0x09, 0x06, 0x04, 0x02, 0x01, 0x00} /* 133MHz */ -}; - -/* JCSTWTM/JCSTWTS */ -static const unsigned long JCSTWTxtbl[2][7] = { - {0x06, 0x04, 0x03, 0x02, 0x02, 0x02, 0x00}, /* 100MHz */ - {0x09, 0x06, 0x04, 0x02, 0x02, 0x02, 0x02} /* 133MHz */ -}; - -/* JCTSS */ -static const unsigned long JCTSStbl[2][7] = { - {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x00}, /* 100MHz */ - {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05} /* 133MHz */ -}; - -/* JCENVT */ -static const unsigned long JCENVTtbl[2][7] = { - {0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00}, /* 100MHz */ - {0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02} /* 133MHz */ -}; - -/* JCACTSELS/JCACTSELM */ -static const unsigned long JCACTSELtbl[2][7] = { - {0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00}, /* 100MHz */ - {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01} /* 133MHz */ -}; - -static const struct pci_device_id scc_pci_tbl[] = { - { PCI_VDEVICE(TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA), 0}, - { } /* terminate list */ -}; - -/** - * scc_set_piomode - Initialize host controller PATA PIO timings - * @ap: Port whose timings we are configuring - * @adev: um - * - * Set PIO mode for device. - * - * LOCKING: - * None (inherited from caller). - */ - -static void scc_set_piomode (struct ata_port *ap, struct ata_device *adev) -{ - unsigned int pio = adev->pio_mode - XFER_PIO_0; - void __iomem *ctrl_base = ap->host->iomap[SCC_CTRL_BAR]; - void __iomem *cckctrl_port = ctrl_base + SCC_CTL_CCKCTRL; - void __iomem *piosht_port = ctrl_base + SCC_CTL_PIOSHT; - void __iomem *pioct_port = ctrl_base + SCC_CTL_PIOCT; - unsigned long reg; - int offset; - - reg = in_be32(cckctrl_port); - if (reg & CCKCTRL_ATACLKOEN) - offset = 1; /* 133MHz */ - else - offset = 0; /* 100MHz */ - - reg = JCHSTtbl[offset][pio] << 16 | JCHHTtbl[offset][pio]; - out_be32(piosht_port, reg); - reg = JCHCTtbl[offset][pio]; - out_be32(pioct_port, reg); -} - -/** - * scc_set_dmamode - Initialize host controller PATA DMA timings - * @ap: Port whose timings we are configuring - * @adev: um - * - * Set UDMA mode for device. - * - * LOCKING: - * None (inherited from caller). - */ - -static void scc_set_dmamode (struct ata_port *ap, struct ata_device *adev) -{ - unsigned int udma = adev->dma_mode; - unsigned int is_slave = (adev->devno != 0); - u8 speed = udma; - void __iomem *ctrl_base = ap->host->iomap[SCC_CTRL_BAR]; - void __iomem *cckctrl_port = ctrl_base + SCC_CTL_CCKCTRL; - void __iomem *mdmact_port = ctrl_base + SCC_CTL_MDMACT; - void __iomem *mcrcst_port = ctrl_base + SCC_CTL_MCRCST; - void __iomem *sdmact_port = ctrl_base + SCC_CTL_SDMACT; - void __iomem *scrcst_port = ctrl_base + SCC_CTL_SCRCST; - void __iomem *udenvt_port = ctrl_base + SCC_CTL_UDENVT; - void __iomem *tdvhsel_port = ctrl_base + SCC_CTL_TDVHSEL; - int offset, idx; - - if (in_be32(cckctrl_port) & CCKCTRL_ATACLKOEN) - offset = 1; /* 133MHz */ - else - offset = 0; /* 100MHz */ - - if (speed >= XFER_UDMA_0) - idx = speed - XFER_UDMA_0; - else - return; - - if (is_slave) { - out_be32(sdmact_port, JCHDCTxtbl[offset][idx]); - out_be32(scrcst_port, JCSTWTxtbl[offset][idx]); - out_be32(tdvhsel_port, - (in_be32(tdvhsel_port) & ~TDVHSEL_SLAVE) | (JCACTSELtbl[offset][idx] << 2)); - } else { - out_be32(mdmact_port, JCHDCTxtbl[offset][idx]); - out_be32(mcrcst_port, JCSTWTxtbl[offset][idx]); - out_be32(tdvhsel_port, - (in_be32(tdvhsel_port) & ~TDVHSEL_MASTER) | JCACTSELtbl[offset][idx]); - } - out_be32(udenvt_port, - JCTSStbl[offset][idx] << 16 | JCENVTtbl[offset][idx]); -} - -unsigned long scc_mode_filter(struct ata_device *adev, unsigned long mask) -{ - /* errata A308 workaround: limit ATAPI UDMA mode to UDMA4 */ - if (adev->class == ATA_DEV_ATAPI && - (mask & (0xE0 << ATA_SHIFT_UDMA))) { - printk(KERN_INFO "%s: limit ATAPI UDMA to UDMA4\n", DRV_NAME); - mask &= ~(0xE0 << ATA_SHIFT_UDMA); - } - return mask; -} - -/** - * scc_tf_load - send taskfile registers to host controller - * @ap: Port to which output is sent - * @tf: ATA taskfile register set - * - * Note: Original code is ata_sff_tf_load(). - */ - -static void scc_tf_load (struct ata_port *ap, const struct ata_taskfile *tf) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; - - if (tf->ctl != ap->last_ctl) { - out_be32(ioaddr->ctl_addr, tf->ctl); - ap->last_ctl = tf->ctl; - ata_wait_idle(ap); - } - - if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { - out_be32(ioaddr->feature_addr, tf->hob_feature); - out_be32(ioaddr->nsect_addr, tf->hob_nsect); - out_be32(ioaddr->lbal_addr, tf->hob_lbal); - out_be32(ioaddr->lbam_addr, tf->hob_lbam); - out_be32(ioaddr->lbah_addr, tf->hob_lbah); - VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n", - tf->hob_feature, - tf->hob_nsect, - tf->hob_lbal, - tf->hob_lbam, - tf->hob_lbah); - } - - if (is_addr) { - out_be32(ioaddr->feature_addr, tf->feature); - out_be32(ioaddr->nsect_addr, tf->nsect); - out_be32(ioaddr->lbal_addr, tf->lbal); - out_be32(ioaddr->lbam_addr, tf->lbam); - out_be32(ioaddr->lbah_addr, tf->lbah); - VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", - tf->feature, - tf->nsect, - tf->lbal, - tf->lbam, - tf->lbah); - } - - if (tf->flags & ATA_TFLAG_DEVICE) { - out_be32(ioaddr->device_addr, tf->device); - VPRINTK("device 0x%X\n", tf->device); - } - - ata_wait_idle(ap); -} - -/** - * scc_check_status - Read device status reg & clear interrupt - * @ap: port where the device is - * - * Note: Original code is ata_check_status(). - */ - -static u8 scc_check_status (struct ata_port *ap) -{ - return in_be32(ap->ioaddr.status_addr); -} - -/** - * scc_tf_read - input device's ATA taskfile shadow registers - * @ap: Port from which input is read - * @tf: ATA taskfile register set for storing input - * - * Note: Original code is ata_sff_tf_read(). - */ - -static void scc_tf_read (struct ata_port *ap, struct ata_taskfile *tf) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - - tf->command = scc_check_status(ap); - tf->feature = in_be32(ioaddr->error_addr); - tf->nsect = in_be32(ioaddr->nsect_addr); - tf->lbal = in_be32(ioaddr->lbal_addr); - tf->lbam = in_be32(ioaddr->lbam_addr); - tf->lbah = in_be32(ioaddr->lbah_addr); - tf->device = in_be32(ioaddr->device_addr); - - if (tf->flags & ATA_TFLAG_LBA48) { - out_be32(ioaddr->ctl_addr, tf->ctl | ATA_HOB); - tf->hob_feature = in_be32(ioaddr->error_addr); - tf->hob_nsect = in_be32(ioaddr->nsect_addr); - tf->hob_lbal = in_be32(ioaddr->lbal_addr); - tf->hob_lbam = in_be32(ioaddr->lbam_addr); - tf->hob_lbah = in_be32(ioaddr->lbah_addr); - out_be32(ioaddr->ctl_addr, tf->ctl); - ap->last_ctl = tf->ctl; - } -} - -/** - * scc_exec_command - issue ATA command to host controller - * @ap: port to which command is being issued - * @tf: ATA taskfile register set - * - * Note: Original code is ata_sff_exec_command(). - */ - -static void scc_exec_command (struct ata_port *ap, - const struct ata_taskfile *tf) -{ - DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command); - - out_be32(ap->ioaddr.command_addr, tf->command); - ata_sff_pause(ap); -} - -/** - * scc_check_altstatus - Read device alternate status reg - * @ap: port where the device is - */ - -static u8 scc_check_altstatus (struct ata_port *ap) -{ - return in_be32(ap->ioaddr.altstatus_addr); -} - -/** - * scc_dev_select - Select device 0/1 on ATA bus - * @ap: ATA channel to manipulate - * @device: ATA device (numbered from zero) to select - * - * Note: Original code is ata_sff_dev_select(). - */ - -static void scc_dev_select (struct ata_port *ap, unsigned int device) -{ - u8 tmp; - - if (device == 0) - tmp = ATA_DEVICE_OBS; - else - tmp = ATA_DEVICE_OBS | ATA_DEV1; - - out_be32(ap->ioaddr.device_addr, tmp); - ata_sff_pause(ap); -} - -/** - * scc_set_devctl - Write device control reg - * @ap: port where the device is - * @ctl: value to write - */ - -static void scc_set_devctl(struct ata_port *ap, u8 ctl) -{ - out_be32(ap->ioaddr.ctl_addr, ctl); -} - -/** - * scc_bmdma_setup - Set up PCI IDE BMDMA transaction - * @qc: Info associated with this ATA transaction. - * - * Note: Original code is ata_bmdma_setup(). - */ - -static void scc_bmdma_setup (struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); - u8 dmactl; - void __iomem *mmio = ap->ioaddr.bmdma_addr; - - /* load PRD table addr */ - out_be32(mmio + SCC_DMA_TABLE_OFS, ap->bmdma_prd_dma); - - /* specify data direction, triple-check start bit is clear */ - dmactl = in_be32(mmio + SCC_DMA_CMD); - dmactl &= ~(ATA_DMA_WR | ATA_DMA_START); - if (!rw) - dmactl |= ATA_DMA_WR; - out_be32(mmio + SCC_DMA_CMD, dmactl); - - /* issue r/w command */ - ap->ops->sff_exec_command(ap, &qc->tf); -} - -/** - * scc_bmdma_start - Start a PCI IDE BMDMA transaction - * @qc: Info associated with this ATA transaction. - * - * Note: Original code is ata_bmdma_start(). - */ - -static void scc_bmdma_start (struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - u8 dmactl; - void __iomem *mmio = ap->ioaddr.bmdma_addr; - - /* start host DMA transaction */ - dmactl = in_be32(mmio + SCC_DMA_CMD); - out_be32(mmio + SCC_DMA_CMD, dmactl | ATA_DMA_START); -} - -/** - * scc_devchk - PATA device presence detection - * @ap: ATA channel to examine - * @device: Device to examine (starting at zero) - * - * Note: Original code is ata_devchk(). - */ - -static unsigned int scc_devchk (struct ata_port *ap, - unsigned int device) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - u8 nsect, lbal; - - ap->ops->sff_dev_select(ap, device); - - out_be32(ioaddr->nsect_addr, 0x55); - out_be32(ioaddr->lbal_addr, 0xaa); - - out_be32(ioaddr->nsect_addr, 0xaa); - out_be32(ioaddr->lbal_addr, 0x55); - - out_be32(ioaddr->nsect_addr, 0x55); - out_be32(ioaddr->lbal_addr, 0xaa); - - nsect = in_be32(ioaddr->nsect_addr); - lbal = in_be32(ioaddr->lbal_addr); - - if ((nsect == 0x55) && (lbal == 0xaa)) - return 1; /* we found a device */ - - return 0; /* nothing found */ -} - -/** - * scc_wait_after_reset - wait for devices to become ready after reset - * - * Note: Original code is ata_sff_wait_after_reset - */ - -static int scc_wait_after_reset(struct ata_link *link, unsigned int devmask, - unsigned long deadline) -{ - struct ata_port *ap = link->ap; - struct ata_ioports *ioaddr = &ap->ioaddr; - unsigned int dev0 = devmask & (1 << 0); - unsigned int dev1 = devmask & (1 << 1); - int rc, ret = 0; - - /* Spec mandates ">= 2ms" before checking status. We wait - * 150ms, because that was the magic delay used for ATAPI - * devices in Hale Landis's ATADRVR, for the period of time - * between when the ATA command register is written, and then - * status is checked. Because waiting for "a while" before - * checking status is fine, post SRST, we perform this magic - * delay here as well. - * - * Old drivers/ide uses the 2mS rule and then waits for ready. - */ - ata_msleep(ap, 150); - - /* always check readiness of the master device */ - rc = ata_sff_wait_ready(link, deadline); - /* -ENODEV means the odd clown forgot the D7 pulldown resistor - * and TF status is 0xff, bail out on it too. - */ - if (rc) - return rc; - - /* if device 1 was found in ata_devchk, wait for register - * access briefly, then wait for BSY to clear. - */ - if (dev1) { - int i; - - ap->ops->sff_dev_select(ap, 1); - - /* Wait for register access. Some ATAPI devices fail - * to set nsect/lbal after reset, so don't waste too - * much time on it. We're gonna wait for !BSY anyway. - */ - for (i = 0; i < 2; i++) { - u8 nsect, lbal; - - nsect = in_be32(ioaddr->nsect_addr); - lbal = in_be32(ioaddr->lbal_addr); - if ((nsect == 1) && (lbal == 1)) - break; - ata_msleep(ap, 50); /* give drive a breather */ - } - - rc = ata_sff_wait_ready(link, deadline); - if (rc) { - if (rc != -ENODEV) - return rc; - ret = rc; - } - } - - /* is all this really necessary? */ - ap->ops->sff_dev_select(ap, 0); - if (dev1) - ap->ops->sff_dev_select(ap, 1); - if (dev0) - ap->ops->sff_dev_select(ap, 0); - - return ret; -} - -/** - * scc_bus_softreset - PATA device software reset - * - * Note: Original code is ata_bus_softreset(). - */ - -static int scc_bus_softreset(struct ata_port *ap, unsigned int devmask, - unsigned long deadline) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - - DPRINTK("ata%u: bus reset via SRST\n", ap->print_id); - - /* software reset. causes dev0 to be selected */ - out_be32(ioaddr->ctl_addr, ap->ctl); - udelay(20); - out_be32(ioaddr->ctl_addr, ap->ctl | ATA_SRST); - udelay(20); - out_be32(ioaddr->ctl_addr, ap->ctl); - - return scc_wait_after_reset(&ap->link, devmask, deadline); -} - -/** - * scc_softreset - reset host port via ATA SRST - * @ap: port to reset - * @classes: resulting classes of attached devices - * @deadline: deadline jiffies for the operation - * - * Note: Original code is ata_sff_softreset(). - */ - -static int scc_softreset(struct ata_link *link, unsigned int *classes, - unsigned long deadline) -{ - struct ata_port *ap = link->ap; - unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS; - unsigned int devmask = 0; - int rc; - u8 err; - - DPRINTK("ENTER\n"); - - /* determine if device 0/1 are present */ - if (scc_devchk(ap, 0)) - devmask |= (1 << 0); - if (slave_possible && scc_devchk(ap, 1)) - devmask |= (1 << 1); - - /* select device 0 again */ - ap->ops->sff_dev_select(ap, 0); - - /* issue bus reset */ - DPRINTK("about to softreset, devmask=%x\n", devmask); - rc = scc_bus_softreset(ap, devmask, deadline); - if (rc) { - ata_port_err(ap, "SRST failed (err_mask=0x%x)\n", rc); - return -EIO; - } - - /* determine by signature whether we have ATA or ATAPI devices */ - classes[0] = ata_sff_dev_classify(&ap->link.device[0], - devmask & (1 << 0), &err); - if (slave_possible && err != 0x81) - classes[1] = ata_sff_dev_classify(&ap->link.device[1], - devmask & (1 << 1), &err); - - DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]); - return 0; -} - -/** - * scc_bmdma_stop - Stop PCI IDE BMDMA transfer - * @qc: Command we are ending DMA for - */ - -static void scc_bmdma_stop (struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - void __iomem *ctrl_base = ap->host->iomap[SCC_CTRL_BAR]; - void __iomem *bmid_base = ap->host->iomap[SCC_BMID_BAR]; - u32 reg; - - while (1) { - reg = in_be32(bmid_base + SCC_DMA_INTST); - - if (reg & INTSTS_SERROR) { - printk(KERN_WARNING "%s: SERROR\n", DRV_NAME); - out_be32(bmid_base + SCC_DMA_INTST, INTSTS_SERROR|INTSTS_BMSINT); - out_be32(bmid_base + SCC_DMA_CMD, - in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START); - continue; - } - - if (reg & INTSTS_PRERR) { - u32 maea0, maec0; - maea0 = in_be32(ctrl_base + SCC_CTL_MAEA0); - maec0 = in_be32(ctrl_base + SCC_CTL_MAEC0); - printk(KERN_WARNING "%s: PRERR [addr:%x cmd:%x]\n", DRV_NAME, maea0, maec0); - out_be32(bmid_base + SCC_DMA_INTST, INTSTS_PRERR|INTSTS_BMSINT); - out_be32(bmid_base + SCC_DMA_CMD, - in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START); - continue; - } - - if (reg & INTSTS_RERR) { - printk(KERN_WARNING "%s: Response Error\n", DRV_NAME); - out_be32(bmid_base + SCC_DMA_INTST, INTSTS_RERR|INTSTS_BMSINT); - out_be32(bmid_base + SCC_DMA_CMD, - in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START); - continue; - } - - if (reg & INTSTS_ICERR) { - out_be32(bmid_base + SCC_DMA_CMD, - in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START); - printk(KERN_WARNING "%s: Illegal Configuration\n", DRV_NAME); - out_be32(bmid_base + SCC_DMA_INTST, INTSTS_ICERR|INTSTS_BMSINT); - continue; - } - - if (reg & INTSTS_BMSINT) { - unsigned int classes; - unsigned long deadline = ata_deadline(jiffies, ATA_TMOUT_BOOT); - printk(KERN_WARNING "%s: Internal Bus Error\n", DRV_NAME); - out_be32(bmid_base + SCC_DMA_INTST, INTSTS_BMSINT); - /* TBD: SW reset */ - scc_softreset(&ap->link, &classes, deadline); - continue; - } - - if (reg & INTSTS_BMHE) { - out_be32(bmid_base + SCC_DMA_INTST, INTSTS_BMHE); - continue; - } - - if (reg & INTSTS_ACTEINT) { - out_be32(bmid_base + SCC_DMA_INTST, INTSTS_ACTEINT); - continue; - } - - if (reg & INTSTS_IOIRQS) { - out_be32(bmid_base + SCC_DMA_INTST, INTSTS_IOIRQS); - continue; - } - break; - } - - /* clear start/stop bit */ - out_be32(bmid_base + SCC_DMA_CMD, - in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START); - - /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */ - ata_sff_dma_pause(ap); /* dummy read */ -} - -/** - * scc_bmdma_status - Read PCI IDE BMDMA status - * @ap: Port associated with this ATA transaction. - */ - -static u8 scc_bmdma_status (struct ata_port *ap) -{ - void __iomem *mmio = ap->ioaddr.bmdma_addr; - u8 host_stat = in_be32(mmio + SCC_DMA_STATUS); - u32 int_status = in_be32(mmio + SCC_DMA_INTST); - struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->link.active_tag); - static int retry = 0; - - /* return if IOS_SS is cleared */ - if (!(in_be32(mmio + SCC_DMA_CMD) & ATA_DMA_START)) - return host_stat; - - /* errata A252,A308 workaround: Step4 */ - if ((scc_check_altstatus(ap) & ATA_ERR) - && (int_status & INTSTS_INTRQ)) - return (host_stat | ATA_DMA_INTR); - - /* errata A308 workaround Step5 */ - if (int_status & INTSTS_IOIRQS) { - host_stat |= ATA_DMA_INTR; - - /* We don't check ATAPI DMA because it is limited to UDMA4 */ - if ((qc->tf.protocol == ATA_PROT_DMA && - qc->dev->xfer_mode > XFER_UDMA_4)) { - if (!(int_status & INTSTS_ACTEINT)) { - printk(KERN_WARNING "ata%u: operation failed (transfer data loss)\n", - ap->print_id); - host_stat |= ATA_DMA_ERR; - if (retry++) - ap->udma_mask &= ~(1 << qc->dev->xfer_mode); - } else - retry = 0; - } - } - - return host_stat; -} - -/** - * scc_data_xfer - Transfer data by PIO - * @dev: device for this I/O - * @buf: data buffer - * @buflen: buffer length - * @rw: read/write - * - * Note: Original code is ata_sff_data_xfer(). - */ - -static unsigned int scc_data_xfer (struct ata_device *dev, unsigned char *buf, - unsigned int buflen, int rw) -{ - struct ata_port *ap = dev->link->ap; - unsigned int words = buflen >> 1; - unsigned int i; - __le16 *buf16 = (__le16 *) buf; - void __iomem *mmio = ap->ioaddr.data_addr; - - /* Transfer multiple of 2 bytes */ - if (rw == READ) - for (i = 0; i < words; i++) - buf16[i] = cpu_to_le16(in_be32(mmio)); - else - for (i = 0; i < words; i++) - out_be32(mmio, le16_to_cpu(buf16[i])); - - /* Transfer trailing 1 byte, if any. */ - if (unlikely(buflen & 0x01)) { - __le16 align_buf[1] = { 0 }; - unsigned char *trailing_buf = buf + buflen - 1; - - if (rw == READ) { - align_buf[0] = cpu_to_le16(in_be32(mmio)); - memcpy(trailing_buf, align_buf, 1); - } else { - memcpy(align_buf, trailing_buf, 1); - out_be32(mmio, le16_to_cpu(align_buf[0])); - } - words++; - } - - return words << 1; -} - -/** - * scc_postreset - standard postreset callback - * @ap: the target ata_port - * @classes: classes of attached devices - * - * Note: Original code is ata_sff_postreset(). - */ - -static void scc_postreset(struct ata_link *link, unsigned int *classes) -{ - struct ata_port *ap = link->ap; - - DPRINTK("ENTER\n"); - - /* is double-select really necessary? */ - if (classes[0] != ATA_DEV_NONE) - ap->ops->sff_dev_select(ap, 1); - if (classes[1] != ATA_DEV_NONE) - ap->ops->sff_dev_select(ap, 0); - - /* bail out if no device is present */ - if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) { - DPRINTK("EXIT, no device\n"); - return; - } - - /* set up device control */ - out_be32(ap->ioaddr.ctl_addr, ap->ctl); - - DPRINTK("EXIT\n"); -} - -/** - * scc_irq_clear - Clear PCI IDE BMDMA interrupt. - * @ap: Port associated with this ATA transaction. - * - * Note: Original code is ata_bmdma_irq_clear(). - */ - -static void scc_irq_clear (struct ata_port *ap) -{ - void __iomem *mmio = ap->ioaddr.bmdma_addr; - - if (!mmio) - return; - - out_be32(mmio + SCC_DMA_STATUS, in_be32(mmio + SCC_DMA_STATUS)); -} - -/** - * scc_port_start - Set port up for dma. - * @ap: Port to initialize - * - * Allocate space for PRD table using ata_bmdma_port_start(). - * Set PRD table address for PTERADD. (PRD Transfer End Read) - */ - -static int scc_port_start (struct ata_port *ap) -{ - void __iomem *mmio = ap->ioaddr.bmdma_addr; - int rc; - - rc = ata_bmdma_port_start(ap); - if (rc) - return rc; - - out_be32(mmio + SCC_DMA_PTERADD, ap->bmdma_prd_dma); - return 0; -} - -/** - * scc_port_stop - Undo scc_port_start() - * @ap: Port to shut down - * - * Reset PTERADD. - */ - -static void scc_port_stop (struct ata_port *ap) -{ - void __iomem *mmio = ap->ioaddr.bmdma_addr; - - out_be32(mmio + SCC_DMA_PTERADD, 0); -} - -static struct scsi_host_template scc_sht = { - ATA_BMDMA_SHT(DRV_NAME), -}; - -static struct ata_port_operations scc_pata_ops = { - .inherits = &ata_bmdma_port_ops, - - .set_piomode = scc_set_piomode, - .set_dmamode = scc_set_dmamode, - .mode_filter = scc_mode_filter, - - .sff_tf_load = scc_tf_load, - .sff_tf_read = scc_tf_read, - .sff_exec_command = scc_exec_command, - .sff_check_status = scc_check_status, - .sff_check_altstatus = scc_check_altstatus, - .sff_dev_select = scc_dev_select, - .sff_set_devctl = scc_set_devctl, - - .bmdma_setup = scc_bmdma_setup, - .bmdma_start = scc_bmdma_start, - .bmdma_stop = scc_bmdma_stop, - .bmdma_status = scc_bmdma_status, - .sff_data_xfer = scc_data_xfer, - - .cable_detect = ata_cable_80wire, - .softreset = scc_softreset, - .postreset = scc_postreset, - - .sff_irq_clear = scc_irq_clear, - - .port_start = scc_port_start, - .port_stop = scc_port_stop, -}; - -static struct ata_port_info scc_port_info[] = { - { - .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = ATA_PIO4, - /* No MWDMA */ - .udma_mask = ATA_UDMA6, - .port_ops = &scc_pata_ops, - }, -}; - -/** - * scc_reset_controller - initialize SCC PATA controller. - */ - -static int scc_reset_controller(struct ata_host *host) -{ - void __iomem *ctrl_base = host->iomap[SCC_CTRL_BAR]; - void __iomem *bmid_base = host->iomap[SCC_BMID_BAR]; - void __iomem *cckctrl_port = ctrl_base + SCC_CTL_CCKCTRL; - void __iomem *mode_port = ctrl_base + SCC_CTL_MODEREG; - void __iomem *ecmode_port = ctrl_base + SCC_CTL_ECMODE; - void __iomem *intmask_port = bmid_base + SCC_DMA_INTMASK; - void __iomem *dmastatus_port = bmid_base + SCC_DMA_STATUS; - u32 reg = 0; - - out_be32(cckctrl_port, reg); - reg |= CCKCTRL_ATACLKOEN; - out_be32(cckctrl_port, reg); - reg |= CCKCTRL_LCLKEN | CCKCTRL_OCLKEN; - out_be32(cckctrl_port, reg); - reg |= CCKCTRL_CRST; - out_be32(cckctrl_port, reg); - - for (;;) { - reg = in_be32(cckctrl_port); - if (reg & CCKCTRL_CRST) - break; - udelay(5000); - } - - reg |= CCKCTRL_ATARESET; - out_be32(cckctrl_port, reg); - out_be32(ecmode_port, ECMODE_VALUE); - out_be32(mode_port, MODE_JCUSFEN); - out_be32(intmask_port, INTMASK_MSK); - - if (in_be32(dmastatus_port) & QCHSD_STPDIAG) { - printk(KERN_WARNING "%s: failed to detect 80c cable. (PDIAG# is high)\n", DRV_NAME); - return -EIO; - } - - return 0; -} - -/** - * scc_setup_ports - initialize ioaddr with SCC PATA port offsets. - * @ioaddr: IO address structure to be initialized - * @base: base address of BMID region - */ - -static void scc_setup_ports (struct ata_ioports *ioaddr, void __iomem *base) -{ - ioaddr->cmd_addr = base + SCC_REG_CMD_ADDR; - ioaddr->altstatus_addr = ioaddr->cmd_addr + SCC_REG_ALTSTATUS; - ioaddr->ctl_addr = ioaddr->cmd_addr + SCC_REG_ALTSTATUS; - ioaddr->bmdma_addr = base; - ioaddr->data_addr = ioaddr->cmd_addr + SCC_REG_DATA; - ioaddr->error_addr = ioaddr->cmd_addr + SCC_REG_ERR; - ioaddr->feature_addr = ioaddr->cmd_addr + SCC_REG_FEATURE; - ioaddr->nsect_addr = ioaddr->cmd_addr + SCC_REG_NSECT; - ioaddr->lbal_addr = ioaddr->cmd_addr + SCC_REG_LBAL; - ioaddr->lbam_addr = ioaddr->cmd_addr + SCC_REG_LBAM; - ioaddr->lbah_addr = ioaddr->cmd_addr + SCC_REG_LBAH; - ioaddr->device_addr = ioaddr->cmd_addr + SCC_REG_DEVICE; - ioaddr->status_addr = ioaddr->cmd_addr + SCC_REG_STATUS; - ioaddr->command_addr = ioaddr->cmd_addr + SCC_REG_CMD; -} - -static int scc_host_init(struct ata_host *host) -{ - struct pci_dev *pdev = to_pci_dev(host->dev); - int rc; - - rc = scc_reset_controller(host); - if (rc) - return rc; - - rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK); - if (rc) - return rc; - rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK); - if (rc) - return rc; - - scc_setup_ports(&host->ports[0]->ioaddr, host->iomap[SCC_BMID_BAR]); - - pci_set_master(pdev); - - return 0; -} - -/** - * scc_init_one - Register SCC PATA device with kernel services - * @pdev: PCI device to register - * @ent: Entry in scc_pci_tbl matching with @pdev - * - * LOCKING: - * Inherited from PCI layer (may sleep). - * - * RETURNS: - * Zero on success, or -ERRNO value. - */ - -static int scc_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) -{ - unsigned int board_idx = (unsigned int) ent->driver_data; - const struct ata_port_info *ppi[] = { &scc_port_info[board_idx], NULL }; - struct ata_host *host; - int rc; - - ata_print_version_once(&pdev->dev, DRV_VERSION); - - host = ata_host_alloc_pinfo(&pdev->dev, ppi, 1); - if (!host) - return -ENOMEM; - - rc = pcim_enable_device(pdev); - if (rc) - return rc; - - rc = pcim_iomap_regions(pdev, (1 << SCC_CTRL_BAR) | (1 << SCC_BMID_BAR), DRV_NAME); - if (rc == -EBUSY) - pcim_pin_device(pdev); - if (rc) - return rc; - host->iomap = pcim_iomap_table(pdev); - - ata_port_pbar_desc(host->ports[0], SCC_CTRL_BAR, -1, "ctrl"); - ata_port_pbar_desc(host->ports[0], SCC_BMID_BAR, -1, "bmid"); - - rc = scc_host_init(host); - if (rc) - return rc; - - return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt, - IRQF_SHARED, &scc_sht); -} - -static struct pci_driver scc_pci_driver = { - .name = DRV_NAME, - .id_table = scc_pci_tbl, - .probe = scc_init_one, - .remove = ata_pci_remove_one, -#ifdef CONFIG_PM_SLEEP - .suspend = ata_pci_device_suspend, - .resume = ata_pci_device_resume, -#endif -}; - -module_pci_driver(scc_pci_driver); - -MODULE_AUTHOR("Toshiba corp"); -MODULE_DESCRIPTION("SCSI low-level driver for Toshiba SCC PATA controller"); -MODULE_LICENSE("GPL"); -MODULE_DEVICE_TABLE(pci, scc_pci_tbl); -MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index a04c49f..39ea67f 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -643,15 +643,6 @@ config BLK_DEV_TC86C001 help This driver adds support for Toshiba TC86C001 GOKU-S chip. -config BLK_DEV_CELLEB - tristate "Toshiba's Cell Reference Set IDE support" - depends on PPC_CELLEB - select BLK_DEV_IDEDMA_PCI - help - This driver provides support for the on-board IDE controller on - Toshiba Cell Reference Board. - If unsure, say Y. - endif # TODO: BLK_DEV_IDEDMA_PCI -> BLK_DEV_IDEDMA_SFF diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile index a04ee82..2a8c417 100644 --- a/drivers/ide/Makefile +++ b/drivers/ide/Makefile @@ -38,7 +38,6 @@ obj-$(CONFIG_BLK_DEV_AEC62XX) += aec62xx.o obj-$(CONFIG_BLK_DEV_ALI15X3) += alim15x3.o obj-$(CONFIG_BLK_DEV_AMD74XX) += amd74xx.o obj-$(CONFIG_BLK_DEV_ATIIXP) += atiixp.o -obj-$(CONFIG_BLK_DEV_CELLEB) += scc_pata.o obj-$(CONFIG_BLK_DEV_CMD64X) += cmd64x.o obj-$(CONFIG_BLK_DEV_CS5520) += cs5520.o obj-$(CONFIG_BLK_DEV_CS5530) += cs5530.o diff --git a/drivers/ide/scc_pata.c b/drivers/ide/scc_pata.c deleted file mode 100644 index 2a2d188..0000000 --- a/drivers/ide/scc_pata.c +++ /dev/null @@ -1,887 +0,0 @@ -/* - * Support for IDE interfaces on Celleb platform - * - * (C) Copyright 2006 TOSHIBA CORPORATION - * - * This code is based on drivers/ide/pci/siimage.c: - * Copyright (C) 2001-2002 Andre Hedrick - * Copyright (C) 2003 Red Hat - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include -#include -#include -#include -#include -#include - -#define PCI_DEVICE_ID_TOSHIBA_SCC_ATA 0x01b4 - -#define SCC_PATA_NAME "scc IDE" - -#define TDVHSEL_MASTER 0x00000001 -#define TDVHSEL_SLAVE 0x00000004 - -#define MODE_JCUSFEN 0x00000080 - -#define CCKCTRL_ATARESET 0x00040000 -#define CCKCTRL_BUFCNT 0x00020000 -#define CCKCTRL_CRST 0x00010000 -#define CCKCTRL_OCLKEN 0x00000100 -#define CCKCTRL_ATACLKOEN 0x00000002 -#define CCKCTRL_LCLKEN 0x00000001 - -#define QCHCD_IOS_SS 0x00000001 - -#define QCHSD_STPDIAG 0x00020000 - -#define INTMASK_MSK 0xD1000012 -#define INTSTS_SERROR 0x80000000 -#define INTSTS_PRERR 0x40000000 -#define INTSTS_RERR 0x10000000 -#define INTSTS_ICERR 0x01000000 -#define INTSTS_BMSINT 0x00000010 -#define INTSTS_BMHE 0x00000008 -#define INTSTS_IOIRQS 0x00000004 -#define INTSTS_INTRQ 0x00000002 -#define INTSTS_ACTEINT 0x00000001 - -#define ECMODE_VALUE 0x01 - -static struct scc_ports { - unsigned long ctl, dma; - struct ide_host *host; /* for removing port from system */ -} scc_ports[MAX_HWIFS]; - -/* PIO transfer mode table */ -/* JCHST */ -static unsigned long JCHSTtbl[2][7] = { - {0x0E, 0x05, 0x02, 0x03, 0x02, 0x00, 0x00}, /* 100MHz */ - {0x13, 0x07, 0x04, 0x04, 0x03, 0x00, 0x00} /* 133MHz */ -}; - -/* JCHHT */ -static unsigned long JCHHTtbl[2][7] = { - {0x0E, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00}, /* 100MHz */ - {0x13, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00} /* 133MHz */ -}; - -/* JCHCT */ -static unsigned long JCHCTtbl[2][7] = { - {0x1D, 0x1D, 0x1C, 0x0B, 0x06, 0x00, 0x00}, /* 100MHz */ - {0x27, 0x26, 0x26, 0x0E, 0x09, 0x00, 0x00} /* 133MHz */ -}; - - -/* DMA transfer mode table */ -/* JCHDCTM/JCHDCTS */ -static unsigned long JCHDCTxtbl[2][7] = { - {0x0A, 0x06, 0x04, 0x03, 0x01, 0x00, 0x00}, /* 100MHz */ - {0x0E, 0x09, 0x06, 0x04, 0x02, 0x01, 0x00} /* 133MHz */ -}; - -/* JCSTWTM/JCSTWTS */ -static unsigned long JCSTWTxtbl[2][7] = { - {0x06, 0x04, 0x03, 0x02, 0x02, 0x02, 0x00}, /* 100MHz */ - {0x09, 0x06, 0x04, 0x02, 0x02, 0x02, 0x02} /* 133MHz */ -}; - -/* JCTSS */ -static unsigned long JCTSStbl[2][7] = { - {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x00}, /* 100MHz */ - {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05} /* 133MHz */ -}; - -/* JCENVT */ -static unsigned long JCENVTtbl[2][7] = { - {0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00}, /* 100MHz */ - {0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02} /* 133MHz */ -}; - -/* JCACTSELS/JCACTSELM */ -static unsigned long JCACTSELtbl[2][7] = { - {0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00}, /* 100MHz */ - {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01} /* 133MHz */ -}; - - -static u8 scc_ide_inb(unsigned long port) -{ - u32 data = in_be32((void*)port); - return (u8)data; -} - -static void scc_exec_command(ide_hwif_t *hwif, u8 cmd) -{ - out_be32((void *)hwif->io_ports.command_addr, cmd); - eieio(); - in_be32((void *)(hwif->dma_base + 0x01c)); - eieio(); -} - -static u8 scc_read_status(ide_hwif_t *hwif) -{ - return (u8)in_be32((void *)hwif->io_ports.status_addr); -} - -static u8 scc_read_altstatus(ide_hwif_t *hwif) -{ - return (u8)in_be32((void *)hwif->io_ports.ctl_addr); -} - -static u8 scc_dma_sff_read_status(ide_hwif_t *hwif) -{ - return (u8)in_be32((void *)(hwif->dma_base + 4)); -} - -static void scc_write_devctl(ide_hwif_t *hwif, u8 ctl) -{ - out_be32((void *)hwif->io_ports.ctl_addr, ctl); - eieio(); - in_be32((void *)(hwif->dma_base + 0x01c)); - eieio(); -} - -static void scc_ide_insw(unsigned long port, void *addr, u32 count) -{ - u16 *ptr = (u16 *)addr; - while (count--) { - *ptr++ = le16_to_cpu(in_be32((void*)port)); - } -} - -static void scc_ide_insl(unsigned long port, void *addr, u32 count) -{ - u16 *ptr = (u16 *)addr; - while (count--) { - *ptr++ = le16_to_cpu(in_be32((void*)port)); - *ptr++ = le16_to_cpu(in_be32((void*)port)); - } -} - -static void scc_ide_outb(u8 addr, unsigned long port) -{ - out_be32((void*)port, addr); -} - -static void -scc_ide_outsw(unsigned long port, void *addr, u32 count) -{ - u16 *ptr = (u16 *)addr; - while (count--) { - out_be32((void*)port, cpu_to_le16(*ptr++)); - } -} - -static void -scc_ide_outsl(unsigned long port, void *addr, u32 count) -{ - u16 *ptr = (u16 *)addr; - while (count--) { - out_be32((void*)port, cpu_to_le16(*ptr++)); - out_be32((void*)port, cpu_to_le16(*ptr++)); - } -} - -/** - * scc_set_pio_mode - set host controller for PIO mode - * @hwif: port - * @drive: drive - * - * Load the timing settings for this device mode into the - * controller. - */ - -static void scc_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) -{ - struct scc_ports *ports = ide_get_hwifdata(hwif); - unsigned long ctl_base = ports->ctl; - unsigned long cckctrl_port = ctl_base + 0xff0; - unsigned long piosht_port = ctl_base + 0x000; - unsigned long pioct_port = ctl_base + 0x004; - unsigned long reg; - int offset; - const u8 pio = drive->pio_mode - XFER_PIO_0; - - reg = in_be32((void __iomem *)cckctrl_port); - if (reg & CCKCTRL_ATACLKOEN) { - offset = 1; /* 133MHz */ - } else { - offset = 0; /* 100MHz */ - } - reg = JCHSTtbl[offset][pio] << 16 | JCHHTtbl[offset][pio]; - out_be32((void __iomem *)piosht_port, reg); - reg = JCHCTtbl[offset][pio]; - out_be32((void __iomem *)pioct_port, reg); -} - -/** - * scc_set_dma_mode - set host controller for DMA mode - * @hwif: port - * @drive: drive - * - * Load the timing settings for this device mode into the - * controller. - */ - -static void scc_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) -{ - struct scc_ports *ports = ide_get_hwifdata(hwif); - unsigned long ctl_base = ports->ctl; - unsigned long cckctrl_port = ctl_base + 0xff0; - unsigned long mdmact_port = ctl_base + 0x008; - unsigned long mcrcst_port = ctl_base + 0x00c; - unsigned long sdmact_port = ctl_base + 0x010; - unsigned long scrcst_port = ctl_base + 0x014; - unsigned long udenvt_port = ctl_base + 0x018; - unsigned long tdvhsel_port = ctl_base + 0x020; - int is_slave = drive->dn & 1; - int offset, idx; - unsigned long reg; - unsigned long jcactsel; - const u8 speed = drive->dma_mode; - - reg = in_be32((void __iomem *)cckctrl_port); - if (reg & CCKCTRL_ATACLKOEN) { - offset = 1; /* 133MHz */ - } else { - offset = 0; /* 100MHz */ - } - - idx = speed - XFER_UDMA_0; - - jcactsel = JCACTSELtbl[offset][idx]; - if (is_slave) { - out_be32((void __iomem *)sdmact_port, JCHDCTxtbl[offset][idx]); - out_be32((void __iomem *)scrcst_port, JCSTWTxtbl[offset][idx]); - jcactsel = jcactsel << 2; - out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_SLAVE) | jcactsel); - } else { - out_be32((void __iomem *)mdmact_port, JCHDCTxtbl[offset][idx]); - out_be32((void __iomem *)mcrcst_port, JCSTWTxtbl[offset][idx]); - out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_MASTER) | jcactsel); - } - reg = JCTSStbl[offset][idx] << 16 | JCENVTtbl[offset][idx]; - out_be32((void __iomem *)udenvt_port, reg); -} - -static void scc_dma_host_set(ide_drive_t *drive, int on) -{ - ide_hwif_t *hwif = drive->hwif; - u8 unit = drive->dn & 1; - u8 dma_stat = scc_dma_sff_read_status(hwif); - - if (on) - dma_stat |= (1 << (5 + unit)); - else - dma_stat &= ~(1 << (5 + unit)); - - scc_ide_outb(dma_stat, hwif->dma_base + 4); -} - -/** - * scc_dma_setup - begin a DMA phase - * @drive: target device - * @cmd: command - * - * Build an IDE DMA PRD (IDE speak for scatter gather table) - * and then set up the DMA transfer registers. - * - * Returns 0 on success. If a PIO fallback is required then 1 - * is returned. - */ - -static int scc_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd) -{ - ide_hwif_t *hwif = drive->hwif; - u32 rw = (cmd->tf_flags & IDE_TFLAG_WRITE) ? 0 : ATA_DMA_WR; - u8 dma_stat; - - /* fall back to pio! */ - if (ide_build_dmatable(drive, cmd) == 0) - return 1; - - /* PRD table */ - out_be32((void __iomem *)(hwif->dma_base + 8), hwif->dmatable_dma); - - /* specify r/w */ - out_be32((void __iomem *)hwif->dma_base, rw); - - /* read DMA status for INTR & ERROR flags */ - dma_stat = scc_dma_sff_read_status(hwif); - - /* clear INTR & ERROR flags */ - out_be32((void __iomem *)(hwif->dma_base + 4), dma_stat | 6); - - return 0; -} - -static void scc_dma_start(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - u8 dma_cmd = scc_ide_inb(hwif->dma_base); - - /* start DMA */ - scc_ide_outb(dma_cmd | 1, hwif->dma_base); -} - -static int __scc_dma_end(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - u8 dma_stat, dma_cmd; - - /* get DMA command mode */ - dma_cmd = scc_ide_inb(hwif->dma_base); - /* stop DMA */ - scc_ide_outb(dma_cmd & ~1, hwif->dma_base); - /* get DMA status */ - dma_stat = scc_dma_sff_read_status(hwif); - /* clear the INTR & ERROR bits */ - scc_ide_outb(dma_stat | 6, hwif->dma_base + 4); - /* verify good DMA status */ - return (dma_stat & 7) != 4 ? (0x10 | dma_stat) : 0; -} - -/** - * scc_dma_end - Stop DMA - * @drive: IDE drive - * - * Check and clear INT Status register. - * Then call __scc_dma_end(). - */ - -static int scc_dma_end(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - void __iomem *dma_base = (void __iomem *)hwif->dma_base; - unsigned long intsts_port = hwif->dma_base + 0x014; - u32 reg; - int dma_stat, data_loss = 0; - static int retry = 0; - - /* errata A308 workaround: Step5 (check data loss) */ - /* We don't check non ide_disk because it is limited to UDMA4 */ - if (!(in_be32((void __iomem *)hwif->io_ports.ctl_addr) - & ATA_ERR) && - drive->media == ide_disk && drive->current_speed > XFER_UDMA_4) { - reg = in_be32((void __iomem *)intsts_port); - if (!(reg & INTSTS_ACTEINT)) { - printk(KERN_WARNING "%s: operation failed (transfer data loss)\n", - drive->name); - data_loss = 1; - if (retry++) { - struct request *rq = hwif->rq; - ide_drive_t *drive; - int i; - - /* ERROR_RESET and drive->crc_count are needed - * to reduce DMA transfer mode in retry process. - */ - if (rq) - rq->errors |= ERROR_RESET; - - ide_port_for_each_dev(i, drive, hwif) - drive->crc_count++; - } - } - } - - while (1) { - reg = in_be32((void __iomem *)intsts_port); - - if (reg & INTSTS_SERROR) { - printk(KERN_WARNING "%s: SERROR\n", SCC_PATA_NAME); - out_be32((void __iomem *)intsts_port, INTSTS_SERROR|INTSTS_BMSINT); - - out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS); - continue; - } - - if (reg & INTSTS_PRERR) { - u32 maea0, maec0; - unsigned long ctl_base = hwif->config_data; - - maea0 = in_be32((void __iomem *)(ctl_base + 0xF50)); - maec0 = in_be32((void __iomem *)(ctl_base + 0xF54)); - - printk(KERN_WARNING "%s: PRERR [addr:%x cmd:%x]\n", SCC_PATA_NAME, maea0, maec0); - - out_be32((void __iomem *)intsts_port, INTSTS_PRERR|INTSTS_BMSINT); - - out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS); - continue; - } - - if (reg & INTSTS_RERR) { - printk(KERN_WARNING "%s: Response Error\n", SCC_PATA_NAME); - out_be32((void __iomem *)intsts_port, INTSTS_RERR|INTSTS_BMSINT); - - out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS); - continue; - } - - if (reg & INTSTS_ICERR) { - out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS); - - printk(KERN_WARNING "%s: Illegal Configuration\n", SCC_PATA_NAME); - out_be32((void __iomem *)intsts_port, INTSTS_ICERR|INTSTS_BMSINT); - continue; - } - - if (reg & INTSTS_BMSINT) { - printk(KERN_WARNING "%s: Internal Bus Error\n", SCC_PATA_NAME); - out_be32((void __iomem *)intsts_port, INTSTS_BMSINT); - - ide_do_reset(drive); - continue; - } - - if (reg & INTSTS_BMHE) { - out_be32((void __iomem *)intsts_port, INTSTS_BMHE); - continue; - } - - if (reg & INTSTS_ACTEINT) { - out_be32((void __iomem *)intsts_port, INTSTS_ACTEINT); - continue; - } - - if (reg & INTSTS_IOIRQS) { - out_be32((void __iomem *)intsts_port, INTSTS_IOIRQS); - continue; - } - break; - } - - dma_stat = __scc_dma_end(drive); - if (data_loss) - dma_stat |= 2; /* emulate DMA error (to retry command) */ - return dma_stat; -} - -/* returns 1 if dma irq issued, 0 otherwise */ -static int scc_dma_test_irq(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - u32 int_stat = in_be32((void __iomem *)hwif->dma_base + 0x014); - - /* SCC errata A252,A308 workaround: Step4 */ - if ((in_be32((void __iomem *)hwif->io_ports.ctl_addr) - & ATA_ERR) && - (int_stat & INTSTS_INTRQ)) - return 1; - - /* SCC errata A308 workaround: Step5 (polling IOIRQS) */ - if (int_stat & INTSTS_IOIRQS) - return 1; - - return 0; -} - -static u8 scc_udma_filter(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - u8 mask = hwif->ultra_mask; - - /* errata A308 workaround: limit non ide_disk drive to UDMA4 */ - if ((drive->media != ide_disk) && (mask & 0xE0)) { - printk(KERN_INFO "%s: limit %s to UDMA4\n", - SCC_PATA_NAME, drive->name); - mask = ATA_UDMA4; - } - - return mask; -} - -/** - * setup_mmio_scc - map CTRL/BMID region - * @dev: PCI device we are configuring - * @name: device name - * - */ - -static int setup_mmio_scc (struct pci_dev *dev, const char *name) -{ - void __iomem *ctl_addr; - void __iomem *dma_addr; - int i, ret; - - for (i = 0; i < MAX_HWIFS; i++) { - if (scc_ports[i].ctl == 0) - break; - } - if (i >= MAX_HWIFS) - return -ENOMEM; - - ret = pci_request_selected_regions(dev, (1 << 2) - 1, name); - if (ret < 0) { - printk(KERN_ERR "%s: can't reserve resources\n", name); - return ret; - } - - ctl_addr = pci_ioremap_bar(dev, 0); - if (!ctl_addr) - goto fail_0; - - dma_addr = pci_ioremap_bar(dev, 1); - if (!dma_addr) - goto fail_1; - - pci_set_master(dev); - scc_ports[i].ctl = (unsigned long)ctl_addr; - scc_ports[i].dma = (unsigned long)dma_addr; - pci_set_drvdata(dev, (void *) &scc_ports[i]); - - return 1; - - fail_1: - iounmap(ctl_addr); - fail_0: - return -ENOMEM; -} - -static int scc_ide_setup_pci_device(struct pci_dev *dev, - const struct ide_port_info *d) -{ - struct scc_ports *ports = pci_get_drvdata(dev); - struct ide_host *host; - struct ide_hw hw, *hws[] = { &hw }; - int i, rc; - - memset(&hw, 0, sizeof(hw)); - for (i = 0; i <= 8; i++) - hw.io_ports_array[i] = ports->dma + 0x20 + i * 4; - hw.irq = dev->irq; - hw.dev = &dev->dev; - - rc = ide_host_add(d, hws, 1, &host); - if (rc) - return rc; - - ports->host = host; - - return 0; -} - -/** - * init_setup_scc - set up an SCC PATA Controller - * @dev: PCI device - * @d: IDE port info - * - * Perform the initial set up for this device. - */ - -static int init_setup_scc(struct pci_dev *dev, const struct ide_port_info *d) -{ - unsigned long ctl_base; - unsigned long dma_base; - unsigned long cckctrl_port; - unsigned long intmask_port; - unsigned long mode_port; - unsigned long ecmode_port; - u32 reg = 0; - struct scc_ports *ports; - int rc; - - rc = pci_enable_device(dev); - if (rc) - goto end; - - rc = setup_mmio_scc(dev, d->name); - if (rc < 0) - goto end; - - ports = pci_get_drvdata(dev); - ctl_base = ports->ctl; - dma_base = ports->dma; - cckctrl_port = ctl_base + 0xff0; - intmask_port = dma_base + 0x010; - mode_port = ctl_base + 0x024; - ecmode_port = ctl_base + 0xf00; - - /* controller initialization */ - reg = 0; - out_be32((void*)cckctrl_port, reg); - reg |= CCKCTRL_ATACLKOEN; - out_be32((void*)cckctrl_port, reg); - reg |= CCKCTRL_LCLKEN | CCKCTRL_OCLKEN; - out_be32((void*)cckctrl_port, reg); - reg |= CCKCTRL_CRST; - out_be32((void*)cckctrl_port, reg); - - for (;;) { - reg = in_be32((void*)cckctrl_port); - if (reg & CCKCTRL_CRST) - break; - udelay(5000); - } - - reg |= CCKCTRL_ATARESET; - out_be32((void*)cckctrl_port, reg); - - out_be32((void*)ecmode_port, ECMODE_VALUE); - out_be32((void*)mode_port, MODE_JCUSFEN); - out_be32((void*)intmask_port, INTMASK_MSK); - - rc = scc_ide_setup_pci_device(dev, d); - - end: - return rc; -} - -static void scc_tf_load(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid) -{ - struct ide_io_ports *io_ports = &drive->hwif->io_ports; - - if (valid & IDE_VALID_FEATURE) - scc_ide_outb(tf->feature, io_ports->feature_addr); - if (valid & IDE_VALID_NSECT) - scc_ide_outb(tf->nsect, io_ports->nsect_addr); - if (valid & IDE_VALID_LBAL) - scc_ide_outb(tf->lbal, io_ports->lbal_addr); - if (valid & IDE_VALID_LBAM) - scc_ide_outb(tf->lbam, io_ports->lbam_addr); - if (valid & IDE_VALID_LBAH) - scc_ide_outb(tf->lbah, io_ports->lbah_addr); - if (valid & IDE_VALID_DEVICE) - scc_ide_outb(tf->device, io_ports->device_addr); -} - -static void scc_tf_read(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid) -{ - struct ide_io_ports *io_ports = &drive->hwif->io_ports; - - if (valid & IDE_VALID_ERROR) - tf->error = scc_ide_inb(io_ports->feature_addr); - if (valid & IDE_VALID_NSECT) - tf->nsect = scc_ide_inb(io_ports->nsect_addr); - if (valid & IDE_VALID_LBAL) - tf->lbal = scc_ide_inb(io_ports->lbal_addr); - if (valid & IDE_VALID_LBAM) - tf->lbam = scc_ide_inb(io_ports->lbam_addr); - if (valid & IDE_VALID_LBAH) - tf->lbah = scc_ide_inb(io_ports->lbah_addr); - if (valid & IDE_VALID_DEVICE) - tf->device = scc_ide_inb(io_ports->device_addr); -} - -static void scc_input_data(ide_drive_t *drive, struct ide_cmd *cmd, - void *buf, unsigned int len) -{ - unsigned long data_addr = drive->hwif->io_ports.data_addr; - - len++; - - if (drive->io_32bit) { - scc_ide_insl(data_addr, buf, len / 4); - - if ((len & 3) >= 2) - scc_ide_insw(data_addr, (u8 *)buf + (len & ~3), 1); - } else - scc_ide_insw(data_addr, buf, len / 2); -} - -static void scc_output_data(ide_drive_t *drive, struct ide_cmd *cmd, - void *buf, unsigned int len) -{ - unsigned long data_addr = drive->hwif->io_ports.data_addr; - - len++; - - if (drive->io_32bit) { - scc_ide_outsl(data_addr, buf, len / 4); - - if ((len & 3) >= 2) - scc_ide_outsw(data_addr, (u8 *)buf + (len & ~3), 1); - } else - scc_ide_outsw(data_addr, buf, len / 2); -} - -/** - * init_mmio_iops_scc - set up the iops for MMIO - * @hwif: interface to set up - * - */ - -static void init_mmio_iops_scc(ide_hwif_t *hwif) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - struct scc_ports *ports = pci_get_drvdata(dev); - unsigned long dma_base = ports->dma; - - ide_set_hwifdata(hwif, ports); - - hwif->dma_base = dma_base; - hwif->config_data = ports->ctl; -} - -/** - * init_iops_scc - set up iops - * @hwif: interface to set up - * - * Do the basic setup for the SCC hardware interface - * and then do the MMIO setup. - */ - -static void init_iops_scc(ide_hwif_t *hwif) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - - hwif->hwif_data = NULL; - if (pci_get_drvdata(dev) == NULL) - return; - init_mmio_iops_scc(hwif); -} - -static int scc_init_dma(ide_hwif_t *hwif, const struct ide_port_info *d) -{ - return ide_allocate_dma_engine(hwif); -} - -static u8 scc_cable_detect(ide_hwif_t *hwif) -{ - return ATA_CBL_PATA80; -} - -/** - * init_hwif_scc - set up hwif - * @hwif: interface to set up - * - * We do the basic set up of the interface structure. The SCC - * requires several custom handlers so we override the default - * ide DMA handlers appropriately. - */ - -static void init_hwif_scc(ide_hwif_t *hwif) -{ - /* PTERADD */ - out_be32((void __iomem *)(hwif->dma_base + 0x018), hwif->dmatable_dma); - - if (in_be32((void __iomem *)(hwif->config_data + 0xff0)) & CCKCTRL_ATACLKOEN) - hwif->ultra_mask = ATA_UDMA6; /* 133MHz */ - else - hwif->ultra_mask = ATA_UDMA5; /* 100MHz */ -} - -static const struct ide_tp_ops scc_tp_ops = { - .exec_command = scc_exec_command, - .read_status = scc_read_status, - .read_altstatus = scc_read_altstatus, - .write_devctl = scc_write_devctl, - - .dev_select = ide_dev_select, - .tf_load = scc_tf_load, - .tf_read = scc_tf_read, - - .input_data = scc_input_data, - .output_data = scc_output_data, -}; - -static const struct ide_port_ops scc_port_ops = { - .set_pio_mode = scc_set_pio_mode, - .set_dma_mode = scc_set_dma_mode, - .udma_filter = scc_udma_filter, - .cable_detect = scc_cable_detect, -}; - -static const struct ide_dma_ops scc_dma_ops = { - .dma_host_set = scc_dma_host_set, - .dma_setup = scc_dma_setup, - .dma_start = scc_dma_start, - .dma_end = scc_dma_end, - .dma_test_irq = scc_dma_test_irq, - .dma_lost_irq = ide_dma_lost_irq, - .dma_timer_expiry = ide_dma_sff_timer_expiry, - .dma_sff_read_status = scc_dma_sff_read_status, -}; - -static const struct ide_port_info scc_chipset = { - .name = "sccIDE", - .init_iops = init_iops_scc, - .init_dma = scc_init_dma, - .init_hwif = init_hwif_scc, - .tp_ops = &scc_tp_ops, - .port_ops = &scc_port_ops, - .dma_ops = &scc_dma_ops, - .host_flags = IDE_HFLAG_SINGLE, - .irq_flags = IRQF_SHARED, - .pio_mask = ATA_PIO4, - .chipset = ide_pci, -}; - -/** - * scc_init_one - pci layer discovery entry - * @dev: PCI device - * @id: ident table entry - * - * Called by the PCI code when it finds an SCC PATA controller. - * We then use the IDE PCI generic helper to do most of the work. - */ - -static int scc_init_one(struct pci_dev *dev, const struct pci_device_id *id) -{ - return init_setup_scc(dev, &scc_chipset); -} - -/** - * scc_remove - pci layer remove entry - * @dev: PCI device - * - * Called by the PCI code when it removes an SCC PATA controller. - */ - -static void scc_remove(struct pci_dev *dev) -{ - struct scc_ports *ports = pci_get_drvdata(dev); - struct ide_host *host = ports->host; - - ide_host_remove(host); - - iounmap((void*)ports->dma); - iounmap((void*)ports->ctl); - pci_release_selected_regions(dev, (1 << 2) - 1); - memset(ports, 0, sizeof(*ports)); -} - -static const struct pci_device_id scc_pci_tbl[] = { - { PCI_VDEVICE(TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA), 0 }, - { 0, }, -}; -MODULE_DEVICE_TABLE(pci, scc_pci_tbl); - -static struct pci_driver scc_pci_driver = { - .name = "SCC IDE", - .id_table = scc_pci_tbl, - .probe = scc_init_one, - .remove = scc_remove, -}; - -static int __init scc_ide_init(void) -{ - return ide_pci_register_driver(&scc_pci_driver); -} - -static void __exit scc_ide_exit(void) -{ - pci_unregister_driver(&scc_pci_driver); -} - -module_init(scc_ide_init); -module_exit(scc_ide_exit); - -MODULE_DESCRIPTION("PCI driver module for Toshiba SCC IDE"); -MODULE_LICENSE("GPL");