diff mbox

[v1,1/2] sata_dwc_460ex: move to generic DMA driver

Message ID 1425415282-3750-2-git-send-email-andriy.shevchenko@linux.intel.com
State Not Applicable
Delegated to: David Miller
Headers show

Commit Message

Andy Shevchenko March 3, 2015, 8:41 p.m. UTC
The SATA implementation based on two actually different devices, i.e. SATA and
DMA controllers.

For Synopsys DesignWare DMA we have already a generic implementation of the
driver. Thus, the patch converts the code to use DMAEngine framework and
dw_dmac driver.

In future it will be better to split the devices inside DTS as well like it's
done on other platforms.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/ata/sata_dwc_460ex.c | 736 +++++++------------------------------------
 1 file changed, 122 insertions(+), 614 deletions(-)

Comments

Måns Rullgård Nov. 22, 2015, 1:03 p.m. UTC | #1
Andy Shevchenko <andriy.shevchenko@linux.intel.com> writes:

> The SATA implementation based on two actually different devices, i.e. SATA and
> DMA controllers.
>
> For Synopsys DesignWare DMA we have already a generic implementation of the
> driver. Thus, the patch converts the code to use DMAEngine framework and
> dw_dmac driver.
>
> In future it will be better to split the devices inside DTS as well like it's
> done on other platforms.
>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
>  drivers/ata/sata_dwc_460ex.c | 736 +++++++------------------------------------
>  1 file changed, 122 insertions(+), 614 deletions(-)
>

[...]

> @@ -1721,16 +1227,16 @@ static int sata_dwc_probe(struct platform_device *ofdev)
>  		   idr, ver[0], ver[1], ver[2]);
>
>  	/* Get SATA DMA interrupt number */
> -	irq = irq_of_parse_and_map(np, 1);
> -	if (irq == NO_IRQ) {
> +	hsdev->dma->irq = irq_of_parse_and_map(np, 1);

This doesn't look like it has been more than compile-tested.  Nothing
ever allocates hsdev->dma, so it can't possibly work.

Also, has anyone given any thought to getting rid of the dependency on
the DW DMA controller?  Presumably support for old device trees would
need to be retained for compatibility.  Maybe checking for a "dmas"
property and falling back on the current behaviour if it's missing.  My
goal is to get this driver working with another chip using the same SATA
controller but a different DMA engine.
Andy Shevchenko Nov. 23, 2015, 10:10 a.m. UTC | #2
On Sun, 2015-11-22 at 13:03 +0000, Måns Rullgård wrote:
> Andy Shevchenko <andriy.shevchenko@linux.intel.com> writes:
> 
> > The SATA implementation based on two actually different devices,
> > i.e. SATA and
> > DMA controllers.
> > 
> > For Synopsys DesignWare DMA we have already a generic
> > implementation of the
> > driver. Thus, the patch converts the code to use DMAEngine
> > framework and
> > dw_dmac driver.
> > 
> > In future it will be better to split the devices inside DTS as well
> > like it's
> > done on other platforms.


> > @@ -1721,16 +1227,16 @@ static int sata_dwc_probe(struct
> > platform_device *ofdev)
> >  		   idr, ver[0], ver[1], ver[2]);
> > 
> >  	/* Get SATA DMA interrupt number */
> > -	irq = irq_of_parse_and_map(np, 1);
> > -	if (irq == NO_IRQ) {
> > +	hsdev->dma->irq = irq_of_parse_and_map(np, 1);
> 
> This doesn't look like it has been more than compile-tested.

Yes, that's true, my question [1] was a crying in the wilderness.

>   Nothing
> ever allocates hsdev->dma, so it can't possibly work.

You are right.

> 
> Also, has anyone given any thought to getting rid of the dependency
> on
> the DW DMA controller?

How? Before it was even more harder link to it (embedded routines).

On the other hand you may introduce dma_ops and use them like it's
done, for example, in spi-dw*.c

>   Presumably support for old device trees would
> need to be retained for compatibility.  Maybe checking for a "dmas"
> property and falling back on the current behaviour if it's missing.  

I didn't get how DT is related to DW or any other DMAC used with this
SATA controller.

> My
> goal is to get this driver working with another chip using the same
> SATA
> controller but a different DMA engine.

It would be nice to eventually bring this working with generic DMA
Engine API. Please, keep me in Cc list regarding this driver.

[1] https://lkml.org/lkml/2014/12/12/547
Måns Rullgård Nov. 23, 2015, 11:58 a.m. UTC | #3
Andy Shevchenko <andriy.shevchenko@linux.intel.com> writes:

> On Sun, 2015-11-22 at 13:03 +0000, Måns Rullgård wrote:
>> Andy Shevchenko <andriy.shevchenko@linux.intel.com> writes:
>> 
>> > The SATA implementation based on two actually different devices,
>> > i.e. SATA and
>> > DMA controllers.
>> > 
>> > For Synopsys DesignWare DMA we have already a generic
>> > implementation of the
>> > driver. Thus, the patch converts the code to use DMAEngine
>> > framework and
>> > dw_dmac driver.
>> > 
>> > In future it will be better to split the devices inside DTS as well
>> > like it's
>> > done on other platforms.
>
>> > @@ -1721,16 +1227,16 @@ static int sata_dwc_probe(struct
>> > platform_device *ofdev)
>> >  		   idr, ver[0], ver[1], ver[2]);
>> > 
>> >  	/* Get SATA DMA interrupt number */
>> > -	irq = irq_of_parse_and_map(np, 1);
>> > -	if (irq == NO_IRQ) {
>> > +	hsdev->dma->irq = irq_of_parse_and_map(np, 1);
>> 
>> This doesn't look like it has been more than compile-tested.
>
> Yes, that's true, my question [1] was a crying in the wilderness.
>
>>   Nothing
>> ever allocates hsdev->dma, so it can't possibly work.
>
> You are right.
>
>> 
>> Also, has anyone given any thought to getting rid of the dependency
>> on the DW DMA controller?
>
> How? Before it was even more harder link to it (embedded routines).

It already uses the dmaengine API to do the transfers.  To make it
generic, two things need to change:

1. The DMA controller should get its own DT node instead of the SATA
   driver calling dw_dma_probe() directly.

2. The SATA driver can then use dma_request_slave_channel() and a "dmas"
   DT property instead of dma_request_channel() and filter function.

The changes are easy to make as such.  The only problem is that we need
to preserve compatibility with old device trees.

> On the other hand you may introduce dma_ops and use them like it's
> done, for example, in spi-dw*.c
>
>>   Presumably support for old device trees would
>> need to be retained for compatibility.  Maybe checking for a "dmas"
>> property and falling back on the current behaviour if it's missing.  
>
> I didn't get how DT is related to DW or any other DMAC used with this
> SATA controller.

See Documentation/devicetree/bindings/dma/dma.txt

>> My goal is to get this driver working with another chip using the
>> same SATA controller but a different DMA engine.
>
> It would be nice to eventually bring this working with generic DMA
> Engine API. Please, keep me in Cc list regarding this driver.

What's your interest in this driver if you don't have the hardware?
diff mbox

Patch

diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c
index 7bc0c12..08cd63f 100644
--- a/drivers/ata/sata_dwc_460ex.c
+++ b/drivers/ata/sata_dwc_460ex.c
@@ -36,11 +36,16 @@ 
 #include <linux/platform_device.h>
 #include <linux/libata.h>
 #include <linux/slab.h>
+
 #include "libata.h"
 
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_cmnd.h>
 
+/* Supported DMA engine drivers */
+#include <linux/platform_data/dma-dw.h>
+#include <linux/dma/dw.h>
+
 /* These two are defined in "libata.h" */
 #undef	DRV_NAME
 #undef	DRV_VERSION
@@ -60,153 +65,9 @@ 
 #define NO_IRQ		0
 #endif
 
-/* SATA DMA driver Globals */
-#define DMA_NUM_CHANS		1
-#define DMA_NUM_CHAN_REGS	8
-
-/* SATA DMA Register definitions */
 #define AHB_DMA_BRST_DFLT	64	/* 16 data items burst length*/
 
-struct dmareg {
-	u32 low;		/* Low bits 0-31 */
-	u32 high;		/* High bits 32-63 */
-};
-
-/* DMA Per Channel registers */
-struct dma_chan_regs {
-	struct dmareg sar;	/* Source Address */
-	struct dmareg dar;	/* Destination address */
-	struct dmareg llp;	/* Linked List Pointer */
-	struct dmareg ctl;	/* Control */
-	struct dmareg sstat;	/* Source Status not implemented in core */
-	struct dmareg dstat;	/* Destination Status not implemented in core*/
-	struct dmareg sstatar;	/* Source Status Address not impl in core */
-	struct dmareg dstatar;	/* Destination Status Address not implemente */
-	struct dmareg cfg;	/* Config */
-	struct dmareg sgr;	/* Source Gather */
-	struct dmareg dsr;	/* Destination Scatter */
-};
-
-/* Generic Interrupt Registers */
-struct dma_interrupt_regs {
-	struct dmareg tfr;	/* Transfer Interrupt */
-	struct dmareg block;	/* Block Interrupt */
-	struct dmareg srctran;	/* Source Transfer Interrupt */
-	struct dmareg dsttran;	/* Dest Transfer Interrupt */
-	struct dmareg error;	/* Error */
-};
-
-struct ahb_dma_regs {
-	struct dma_chan_regs	chan_regs[DMA_NUM_CHAN_REGS];
-	struct dma_interrupt_regs interrupt_raw;	/* Raw Interrupt */
-	struct dma_interrupt_regs interrupt_status;	/* Interrupt Status */
-	struct dma_interrupt_regs interrupt_mask;	/* Interrupt Mask */
-	struct dma_interrupt_regs interrupt_clear;	/* Interrupt Clear */
-	struct dmareg		statusInt;	/* Interrupt combined*/
-	struct dmareg		rq_srcreg;	/* Src Trans Req */
-	struct dmareg		rq_dstreg;	/* Dst Trans Req */
-	struct dmareg		rq_sgl_srcreg;	/* Sngl Src Trans Req*/
-	struct dmareg		rq_sgl_dstreg;	/* Sngl Dst Trans Req*/
-	struct dmareg		rq_lst_srcreg;	/* Last Src Trans Req*/
-	struct dmareg		rq_lst_dstreg;	/* Last Dst Trans Req*/
-	struct dmareg		dma_cfg;		/* DMA Config */
-	struct dmareg		dma_chan_en;		/* DMA Channel Enable*/
-	struct dmareg		dma_id;			/* DMA ID */
-	struct dmareg		dma_test;		/* DMA Test */
-	struct dmareg		res1;			/* reserved */
-	struct dmareg		res2;			/* reserved */
-	/*
-	 * DMA Comp Params
-	 * Param 6 = dma_param[0], Param 5 = dma_param[1],
-	 * Param 4 = dma_param[2] ...
-	 */
-	struct dmareg		dma_params[6];
-};
-
-/* Data structure for linked list item */
-struct lli {
-	u32		sar;		/* Source Address */
-	u32		dar;		/* Destination address */
-	u32		llp;		/* Linked List Pointer */
-	struct dmareg	ctl;		/* Control */
-	struct dmareg	dstat;		/* Destination Status */
-};
-
-enum {
-	SATA_DWC_DMAC_LLI_SZ =	(sizeof(struct lli)),
-	SATA_DWC_DMAC_LLI_NUM =	256,
-	SATA_DWC_DMAC_LLI_TBL_SZ = (SATA_DWC_DMAC_LLI_SZ * \
-					SATA_DWC_DMAC_LLI_NUM),
-	SATA_DWC_DMAC_TWIDTH_BYTES = 4,
-	SATA_DWC_DMAC_CTRL_TSIZE_MAX = (0x00000800 * \
-						SATA_DWC_DMAC_TWIDTH_BYTES),
-};
-
-/* DMA Register Operation Bits */
 enum {
-	DMA_EN	=		0x00000001, /* Enable AHB DMA */
-	DMA_CTL_LLP_SRCEN =	0x10000000, /* Blk chain enable Src */
-	DMA_CTL_LLP_DSTEN =	0x08000000, /* Blk chain enable Dst */
-};
-
-#define	DMA_CTL_BLK_TS(size)	((size) & 0x000000FFF)	/* Blk Transfer size */
-#define DMA_CHANNEL(ch)		(0x00000001 << (ch))	/* Select channel */
-	/* Enable channel */
-#define	DMA_ENABLE_CHAN(ch)	((0x00000001 << (ch)) |			\
-				 ((0x000000001 << (ch)) << 8))
-	/* Disable channel */
-#define	DMA_DISABLE_CHAN(ch)	(0x00000000 | ((0x000000001 << (ch)) << 8))
-	/* Transfer Type & Flow Controller */
-#define	DMA_CTL_TTFC(type)	(((type) & 0x7) << 20)
-#define	DMA_CTL_SMS(num)	(((num) & 0x3) << 25) /* Src Master Select */
-#define	DMA_CTL_DMS(num)	(((num) & 0x3) << 23)/* Dst Master Select */
-	/* Src Burst Transaction Length */
-#define DMA_CTL_SRC_MSIZE(size) (((size) & 0x7) << 14)
-	/* Dst Burst Transaction Length */
-#define	DMA_CTL_DST_MSIZE(size) (((size) & 0x7) << 11)
-	/* Source Transfer Width */
-#define	DMA_CTL_SRC_TRWID(size) (((size) & 0x7) << 4)
-	/* Destination Transfer Width */
-#define	DMA_CTL_DST_TRWID(size) (((size) & 0x7) << 1)
-
-/* Assign HW handshaking interface (x) to destination / source peripheral */
-#define	DMA_CFG_HW_HS_DEST(int_num) (((int_num) & 0xF) << 11)
-#define	DMA_CFG_HW_HS_SRC(int_num) (((int_num) & 0xF) << 7)
-#define	DMA_CFG_HW_CH_PRIOR(int_num) (((int_num) & 0xF) << 5)
-#define	DMA_LLP_LMS(addr, master) (((addr) & 0xfffffffc) | (master))
-
-/*
- * This define is used to set block chaining disabled in the control low
- * register.  It is already in little endian format so it can be &'d dirctly.
- * It is essentially: cpu_to_le32(~(DMA_CTL_LLP_SRCEN | DMA_CTL_LLP_DSTEN))
- */
-enum {
-	DMA_CTL_LLP_DISABLE_LE32 = 0xffffffe7,
-	DMA_CTL_TTFC_P2M_DMAC =	0x00000002, /* Per to mem, DMAC cntr */
-	DMA_CTL_TTFC_M2P_PER =	0x00000003, /* Mem to per, peripheral cntr */
-	DMA_CTL_SINC_INC =	0x00000000, /* Source Address Increment */
-	DMA_CTL_SINC_DEC =	0x00000200,
-	DMA_CTL_SINC_NOCHANGE =	0x00000400,
-	DMA_CTL_DINC_INC =	0x00000000, /* Destination Address Increment */
-	DMA_CTL_DINC_DEC =	0x00000080,
-	DMA_CTL_DINC_NOCHANGE =	0x00000100,
-	DMA_CTL_INT_EN =	0x00000001, /* Interrupt Enable */
-
-/* Channel Configuration Register high bits */
-	DMA_CFG_FCMOD_REQ =	0x00000001, /* Flow Control - request based */
-	DMA_CFG_PROTCTL	=	(0x00000003 << 2),/* Protection Control */
-
-/* Channel Configuration Register low bits */
-	DMA_CFG_RELD_DST =	0x80000000, /* Reload Dest / Src Addr */
-	DMA_CFG_RELD_SRC =	0x40000000,
-	DMA_CFG_HS_SELSRC =	0x00000800, /* Software handshake Src/ Dest */
-	DMA_CFG_HS_SELDST =	0x00000400,
-	DMA_CFG_FIFOEMPTY =     (0x00000001 << 9), /* FIFO Empty bit */
-
-/* Channel Linked List Pointer Register */
-	DMA_LLP_AHBMASTER1 =	0,	/* List Master Select */
-	DMA_LLP_AHBMASTER2 =	1,
-
 	SATA_DWC_MAX_PORTS = 1,
 
 	SATA_DWC_SCR_OFFSET = 0x24,
@@ -287,7 +148,7 @@  struct sata_dwc_device {
 	struct ata_host		*host;
 	u8 __iomem		*reg_base;
 	struct sata_dwc_regs	*sata_dwc_regs;	/* DW Synopsys SATA specific */
-	int			irq_dma;
+	struct dw_dma_chip	*dma;
 };
 
 #define SATA_DWC_QCMD_MAX	32
@@ -295,10 +156,13 @@  struct sata_dwc_device {
 struct sata_dwc_device_port {
 	struct sata_dwc_device	*hsdev;
 	int			cmd_issued[SATA_DWC_QCMD_MAX];
-	struct lli		*llit[SATA_DWC_QCMD_MAX];  /* DMA LLI table */
-	dma_addr_t		llit_dma[SATA_DWC_QCMD_MAX];
-	u32			dma_chan[SATA_DWC_QCMD_MAX];
 	int			dma_pending[SATA_DWC_QCMD_MAX];
+
+	/* DMA info */
+	struct dw_dma_slave		*dws;
+	struct dma_chan			*chan;
+	struct dma_async_tx_descriptor	*desc[SATA_DWC_QCMD_MAX];
+	u32				dma_interrupt_count;
 };
 
 /*
@@ -330,14 +194,18 @@  struct sata_dwc_host_priv {
 	void	__iomem	 *scr_addr_sstatus;
 	u32	sata_dwc_sactive_issued ;
 	u32	sata_dwc_sactive_queued ;
-	u32	dma_interrupt_count;
-	struct	ahb_dma_regs	*sata_dma_regs;
 	struct	device	*dwc_dev;
-	int	dma_channel;
 };
 
 static struct sata_dwc_host_priv host_pvt;
 
+static struct dw_dma_slave sata_dwc_dma_dws = {
+	.src_id = 0,
+	.dst_id = 0,
+	.src_master = 0,
+	.dst_master = 1,
+};
+
 /*
  * Prototypes
  */
@@ -347,12 +215,6 @@  static int sata_dwc_qc_complete(struct ata_port *ap, struct ata_queued_cmd *qc,
 static void sata_dwc_dma_xfer_complete(struct ata_port *ap, u32 check_status);
 static void sata_dwc_port_stop(struct ata_port *ap);
 static void sata_dwc_clear_dmacr(struct sata_dwc_device_port *hsdevp, u8 tag);
-static int dma_dwc_init(struct sata_dwc_device *hsdev, int irq);
-static void dma_dwc_exit(struct sata_dwc_device *hsdev);
-static int dma_dwc_xfer_setup(struct scatterlist *sg, int num_elems,
-			      struct lli *lli, dma_addr_t dma_lli,
-			      void __iomem *addr, int dir);
-static void dma_dwc_xfer_start(int dma_ch);
 
 static const char *get_prot_descript(u8 protocol)
 {
@@ -405,76 +267,8 @@  static void sata_dwc_tf_dump(struct ata_taskfile *tf)
 		tf->hob_lbah);
 }
 
-/*
- * Function: get_burst_length_encode
- * arguments: datalength: length in bytes of data
- * returns value to be programmed in register corresponding to data length
- * This value is effectively the log(base 2) of the length
- */
-static  int get_burst_length_encode(int datalength)
-{
-	int items = datalength >> 2;	/* div by 4 to get lword count */
-
-	if (items >= 64)
-		return 5;
-
-	if (items >= 32)
-		return 4;
-
-	if (items >= 16)
-		return 3;
-
-	if (items >= 8)
-		return 2;
-
-	if (items >= 4)
-		return 1;
-
-	return 0;
-}
-
-static  void clear_chan_interrupts(int c)
+static void dma_dwc_xfer_done(void *hsdev_instance)
 {
-	out_le32(&(host_pvt.sata_dma_regs->interrupt_clear.tfr.low),
-		 DMA_CHANNEL(c));
-	out_le32(&(host_pvt.sata_dma_regs->interrupt_clear.block.low),
-		 DMA_CHANNEL(c));
-	out_le32(&(host_pvt.sata_dma_regs->interrupt_clear.srctran.low),
-		 DMA_CHANNEL(c));
-	out_le32(&(host_pvt.sata_dma_regs->interrupt_clear.dsttran.low),
-		 DMA_CHANNEL(c));
-	out_le32(&(host_pvt.sata_dma_regs->interrupt_clear.error.low),
-		 DMA_CHANNEL(c));
-}
-
-/*
- * Function: dma_request_channel
- * arguments: None
- * returns channel number if available else -1
- * This function assigns the next available DMA channel from the list to the
- * requester
- */
-static int dma_request_channel(void)
-{
-	/* Check if the channel is not currently in use */
-	if (!(in_le32(&(host_pvt.sata_dma_regs->dma_chan_en.low)) &
-		DMA_CHANNEL(host_pvt.dma_channel)))
-		return host_pvt.dma_channel;
-	dev_err(host_pvt.dwc_dev, "%s Channel %d is currently in use\n",
-		__func__, host_pvt.dma_channel);
-	return -1;
-}
-
-/*
- * Function: dma_dwc_interrupt
- * arguments: irq, dev_id, pt_regs
- * returns channel number if available else -1
- * Interrupt Handler for DW AHB SATA DMA
- */
-static irqreturn_t dma_dwc_interrupt(int irq, void *hsdev_instance)
-{
-	int chan;
-	u32 tfr_reg, err_reg;
 	unsigned long flags;
 	struct sata_dwc_device *hsdev = hsdev_instance;
 	struct ata_host *host = (struct ata_host *)hsdev->host;
@@ -488,341 +282,65 @@  static irqreturn_t dma_dwc_interrupt(int irq, void *hsdev_instance)
 	hsdevp = HSDEVP_FROM_AP(ap);
 	tag = ap->link.active_tag;
 
-	tfr_reg = in_le32(&(host_pvt.sata_dma_regs->interrupt_status.tfr\
-			.low));
-	err_reg = in_le32(&(host_pvt.sata_dma_regs->interrupt_status.error\
-			.low));
-
-	dev_dbg(ap->dev, "eot=0x%08x err=0x%08x pending=%d active port=%d\n",
-		tfr_reg, err_reg, hsdevp->dma_pending[tag], port);
-
-	chan = host_pvt.dma_channel;
-	if (chan >= 0) {
-		/* Check for end-of-transfer interrupt. */
-		if (tfr_reg & DMA_CHANNEL(chan)) {
-			/*
-			 * Each DMA command produces 2 interrupts.  Only
-			 * complete the command after both interrupts have been
-			 * seen. (See sata_dwc_isr())
-			 */
-			host_pvt.dma_interrupt_count++;
-			sata_dwc_clear_dmacr(hsdevp, tag);
-
-			if (hsdevp->dma_pending[tag] ==
-			    SATA_DWC_DMA_PENDING_NONE) {
-				dev_err(ap->dev, "DMA not pending eot=0x%08x "
-					"err=0x%08x tag=0x%02x pending=%d\n",
-					tfr_reg, err_reg, tag,
-					hsdevp->dma_pending[tag]);
-			}
-
-			if ((host_pvt.dma_interrupt_count % 2) == 0)
-				sata_dwc_dma_xfer_complete(ap, 1);
-
-			/* Clear the interrupt */
-			out_le32(&(host_pvt.sata_dma_regs->interrupt_clear\
-				.tfr.low),
-				 DMA_CHANNEL(chan));
-		}
-
-		/* Check for error interrupt. */
-		if (err_reg & DMA_CHANNEL(chan)) {
-			/* TODO Need error handler ! */
-			dev_err(ap->dev, "error interrupt err_reg=0x%08x\n",
-				err_reg);
-
-			/* Clear the interrupt. */
-			out_le32(&(host_pvt.sata_dma_regs->interrupt_clear\
-				.error.low),
-				 DMA_CHANNEL(chan));
-		}
-	}
-	spin_unlock_irqrestore(&host->lock, flags);
-	return IRQ_HANDLED;
-}
-
-/*
- * Function: dma_request_interrupts
- * arguments: hsdev
- * returns status
- * This function registers ISR for a particular DMA channel interrupt
- */
-static int dma_request_interrupts(struct sata_dwc_device *hsdev, int irq)
-{
-	int retval = 0;
-	int chan = host_pvt.dma_channel;
-
-	if (chan >= 0) {
-		/* Unmask error interrupt */
-		out_le32(&(host_pvt.sata_dma_regs)->interrupt_mask.error.low,
-			 DMA_ENABLE_CHAN(chan));
-
-		/* Unmask end-of-transfer interrupt */
-		out_le32(&(host_pvt.sata_dma_regs)->interrupt_mask.tfr.low,
-			 DMA_ENABLE_CHAN(chan));
-	}
-
-	retval = request_irq(irq, dma_dwc_interrupt, 0, "SATA DMA", hsdev);
-	if (retval) {
-		dev_err(host_pvt.dwc_dev, "%s: could not get IRQ %d\n",
-		__func__, irq);
-		return -ENODEV;
-	}
-
-	/* Mark this interrupt as requested */
-	hsdev->irq_dma = irq;
-	return 0;
-}
-
-/*
- * Function: map_sg_to_lli
- * The Synopsis driver has a comment proposing that better performance
- * is possible by only enabling interrupts on the last item in the linked list.
- * However, it seems that could be a problem if an error happened on one of the
- * first items.  The transfer would halt, but no error interrupt would occur.
- * Currently this function sets interrupts enabled for each linked list item:
- * DMA_CTL_INT_EN.
- */
-static int map_sg_to_lli(struct scatterlist *sg, int num_elems,
-			struct lli *lli, dma_addr_t dma_lli,
-			void __iomem *dmadr_addr, int dir)
-{
-	int i, idx = 0;
-	int fis_len = 0;
-	dma_addr_t next_llp;
-	int bl;
-	int sms_val, dms_val;
-
-	sms_val = 0;
-	dms_val = 1 + host_pvt.dma_channel;
-	dev_dbg(host_pvt.dwc_dev,
-		"%s: sg=%p nelem=%d lli=%p dma_lli=0x%pad dmadr=0x%p\n",
-		__func__, sg, num_elems, lli, &dma_lli, dmadr_addr);
-
-	bl = get_burst_length_encode(AHB_DMA_BRST_DFLT);
-
-	for (i = 0; i < num_elems; i++, sg++) {
-		u32 addr, offset;
-		u32 sg_len, len;
-
-		addr = (u32) sg_dma_address(sg);
-		sg_len = sg_dma_len(sg);
-
-		dev_dbg(host_pvt.dwc_dev, "%s: elem=%d sg_addr=0x%x sg_len"
-			"=%d\n", __func__, i, addr, sg_len);
-
-		while (sg_len) {
-			if (idx >= SATA_DWC_DMAC_LLI_NUM) {
-				/* The LLI table is not large enough. */
-				dev_err(host_pvt.dwc_dev, "LLI table overrun "
-				"(idx=%d)\n", idx);
-				break;
-			}
-			len = (sg_len > SATA_DWC_DMAC_CTRL_TSIZE_MAX) ?
-				SATA_DWC_DMAC_CTRL_TSIZE_MAX : sg_len;
-
-			offset = addr & 0xffff;
-			if ((offset + sg_len) > 0x10000)
-				len = 0x10000 - offset;
-
-			/*
-			 * Make sure a LLI block is not created that will span
-			 * 8K max FIS boundary.  If the block spans such a FIS
-			 * boundary, there is a chance that a DMA burst will
-			 * cross that boundary -- this results in an error in
-			 * the host controller.
-			 */
-			if (fis_len + len > 8192) {
-				dev_dbg(host_pvt.dwc_dev, "SPLITTING: fis_len="
-					"%d(0x%x) len=%d(0x%x)\n", fis_len,
-					 fis_len, len, len);
-				len = 8192 - fis_len;
-				fis_len = 0;
-			} else {
-				fis_len += len;
-			}
-			if (fis_len == 8192)
-				fis_len = 0;
-
-			/*
-			 * Set DMA addresses and lower half of control register
-			 * based on direction.
-			 */
-			if (dir == DMA_FROM_DEVICE) {
-				lli[idx].dar = cpu_to_le32(addr);
-				lli[idx].sar = cpu_to_le32((u32)dmadr_addr);
-
-				lli[idx].ctl.low = cpu_to_le32(
-					DMA_CTL_TTFC(DMA_CTL_TTFC_P2M_DMAC) |
-					DMA_CTL_SMS(sms_val) |
-					DMA_CTL_DMS(dms_val) |
-					DMA_CTL_SRC_MSIZE(bl) |
-					DMA_CTL_DST_MSIZE(bl) |
-					DMA_CTL_SINC_NOCHANGE |
-					DMA_CTL_SRC_TRWID(2) |
-					DMA_CTL_DST_TRWID(2) |
-					DMA_CTL_INT_EN |
-					DMA_CTL_LLP_SRCEN |
-					DMA_CTL_LLP_DSTEN);
-			} else {	/* DMA_TO_DEVICE */
-				lli[idx].sar = cpu_to_le32(addr);
-				lli[idx].dar = cpu_to_le32((u32)dmadr_addr);
-
-				lli[idx].ctl.low = cpu_to_le32(
-					DMA_CTL_TTFC(DMA_CTL_TTFC_M2P_PER) |
-					DMA_CTL_SMS(dms_val) |
-					DMA_CTL_DMS(sms_val) |
-					DMA_CTL_SRC_MSIZE(bl) |
-					DMA_CTL_DST_MSIZE(bl) |
-					DMA_CTL_DINC_NOCHANGE |
-					DMA_CTL_SRC_TRWID(2) |
-					DMA_CTL_DST_TRWID(2) |
-					DMA_CTL_INT_EN |
-					DMA_CTL_LLP_SRCEN |
-					DMA_CTL_LLP_DSTEN);
-			}
-
-			dev_dbg(host_pvt.dwc_dev, "%s setting ctl.high len: "
-				"0x%08x val: 0x%08x\n", __func__,
-				len, DMA_CTL_BLK_TS(len / 4));
-
-			/* Program the LLI CTL high register */
-			lli[idx].ctl.high = cpu_to_le32(DMA_CTL_BLK_TS\
-						(len / 4));
-
-			/* Program the next pointer.  The next pointer must be
-			 * the physical address, not the virtual address.
-			 */
-			next_llp = (dma_lli + ((idx + 1) * sizeof(struct \
-							lli)));
-
-			/* The last 2 bits encode the list master select. */
-			next_llp = DMA_LLP_LMS(next_llp, DMA_LLP_AHBMASTER2);
-
-			lli[idx].llp = cpu_to_le32(next_llp);
-			idx++;
-			sg_len -= len;
-			addr += len;
-		}
-	}
-
 	/*
-	 * The last next ptr has to be zero and the last control low register
-	 * has to have LLP_SRC_EN and LLP_DST_EN (linked list pointer source
-	 * and destination enable) set back to 0 (disabled.) This is what tells
-	 * the core that this is the last item in the linked list.
+	 * Each DMA command produces 2 interrupts.  Only
+	 * complete the command after both interrupts have been
+	 * seen. (See sata_dwc_isr())
 	 */
-	if (idx) {
-		lli[idx-1].llp = 0x00000000;
-		lli[idx-1].ctl.low &= DMA_CTL_LLP_DISABLE_LE32;
+	hsdevp->dma_interrupt_count++;
+	sata_dwc_clear_dmacr(hsdevp, tag);
 
-		/* Flush cache to memory */
-		dma_cache_sync(NULL, lli, (sizeof(struct lli) * idx),
-			       DMA_BIDIRECTIONAL);
+	if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_NONE) {
+		dev_err(ap->dev, "DMA not pending tag=0x%02x pending=%d\n",
+			tag, hsdevp->dma_pending[tag]);
 	}
 
-	return idx;
-}
+	if ((hsdevp->dma_interrupt_count % 2) == 0)
+	sata_dwc_dma_xfer_complete(ap, 1);
 
-/*
- * Function: dma_dwc_xfer_start
- * arguments: Channel number
- * Return : None
- * Enables the DMA channel
- */
-static void dma_dwc_xfer_start(int dma_ch)
-{
-	/* Enable the DMA channel */
-	out_le32(&(host_pvt.sata_dma_regs->dma_chan_en.low),
-		 in_le32(&(host_pvt.sata_dma_regs->dma_chan_en.low)) |
-		 DMA_ENABLE_CHAN(dma_ch));
+	spin_unlock_irqrestore(&host->lock, flags);
 }
 
-static int dma_dwc_xfer_setup(struct scatterlist *sg, int num_elems,
-			      struct lli *lli, dma_addr_t dma_lli,
-			      void __iomem *addr, int dir)
+static struct dma_async_tx_descriptor *dma_dwc_xfer_setup(struct ata_queued_cmd *qc)
 {
-	int dma_ch;
-	int num_lli;
-	/* Acquire DMA channel */
-	dma_ch = dma_request_channel();
-	if (dma_ch == -1) {
-		dev_err(host_pvt.dwc_dev, "%s: dma channel unavailable\n",
-			 __func__);
-		return -EAGAIN;
+	struct ata_port *ap = qc->ap;
+	struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+	struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
+	dma_addr_t addr = (dma_addr_t)&hsdev->sata_dwc_regs->dmadr;
+	struct dma_slave_config sconf;
+	struct dma_async_tx_descriptor *desc;
+
+	if (qc->dma_dir == DMA_DEV_TO_MEM) {
+		sconf.src_addr = addr;
+		sconf.device_fc = true;
+	} else {	/* DMA_MEM_TO_DEV */
+		sconf.dst_addr = addr;
+		sconf.device_fc = false;
 	}
 
-	/* Convert SG list to linked list of items (LLIs) for AHB DMA */
-	num_lli = map_sg_to_lli(sg, num_elems, lli, dma_lli, addr, dir);
-
-	dev_dbg(host_pvt.dwc_dev, "%s sg: 0x%p, count: %d lli: %p dma_lli:"
-		" 0x%0xlx addr: %p lli count: %d\n", __func__, sg, num_elems,
-		 lli, (u32)dma_lli, addr, num_lli);
-
-	clear_chan_interrupts(dma_ch);
-
-	/* Program the CFG register. */
-	out_le32(&(host_pvt.sata_dma_regs->chan_regs[dma_ch].cfg.high),
-		 DMA_CFG_HW_HS_SRC(dma_ch) | DMA_CFG_HW_HS_DEST(dma_ch) |
-		 DMA_CFG_PROTCTL | DMA_CFG_FCMOD_REQ);
-	out_le32(&(host_pvt.sata_dma_regs->chan_regs[dma_ch].cfg.low),
-		 DMA_CFG_HW_CH_PRIOR(dma_ch));
-
-	/* Program the address of the linked list */
-	out_le32(&(host_pvt.sata_dma_regs->chan_regs[dma_ch].llp.low),
-		 DMA_LLP_LMS(dma_lli, DMA_LLP_AHBMASTER2));
-
-	/* Program the CTL register with src enable / dst enable */
-	out_le32(&(host_pvt.sata_dma_regs->chan_regs[dma_ch].ctl.low),
-		 DMA_CTL_LLP_SRCEN | DMA_CTL_LLP_DSTEN);
-	return dma_ch;
-}
-
-/*
- * Function: dma_dwc_exit
- * arguments: None
- * returns status
- * This function exits the SATA DMA driver
- */
-static void dma_dwc_exit(struct sata_dwc_device *hsdev)
-{
-	dev_dbg(host_pvt.dwc_dev, "%s:\n", __func__);
-	if (host_pvt.sata_dma_regs) {
-		iounmap((void __iomem *)host_pvt.sata_dma_regs);
-		host_pvt.sata_dma_regs = NULL;
-	}
+	sconf.direction = qc->dma_dir;
+	sconf.src_maxburst = AHB_DMA_BRST_DFLT;
+	sconf.dst_maxburst = AHB_DMA_BRST_DFLT;
+	sconf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+	sconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
 
-	if (hsdev->irq_dma) {
-		free_irq(hsdev->irq_dma, hsdev);
-		hsdev->irq_dma = 0;
-	}
-}
+	dmaengine_slave_config(hsdevp->chan, &sconf);
 
-/*
- * Function: dma_dwc_init
- * arguments: hsdev
- * returns status
- * This function initializes the SATA DMA driver
- */
-static int dma_dwc_init(struct sata_dwc_device *hsdev, int irq)
-{
-	int err;
+	/* Convert SG list to linked list of items (LLIs) for AHB DMA */
+	desc = dmaengine_prep_slave_sg(hsdevp->chan, qc->sg, qc->n_elem,
+				       qc->dma_dir,
+				       DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 
-	err = dma_request_interrupts(hsdev, irq);
-	if (err) {
-		dev_err(host_pvt.dwc_dev, "%s: dma_request_interrupts returns"
-			" %d\n", __func__, err);
-		return err;
-	}
+	if (!desc)
+		return NULL;
 
-	/* Enabe DMA */
-	out_le32(&(host_pvt.sata_dma_regs->dma_cfg.low), DMA_EN);
+	desc->callback = dma_dwc_xfer_done;
+	desc->callback_param = hsdev;
 
-	dev_notice(host_pvt.dwc_dev, "DMA initialized\n");
-	dev_dbg(host_pvt.dwc_dev, "SATA DMA registers=0x%p\n", host_pvt.\
-		sata_dma_regs);
+	dev_dbg(host_pvt.dwc_dev, "%s sg: 0x%p, count: %d addr: %pad\n",
+		__func__, qc->sg, qc->n_elem, &addr);
 
-	return 0;
+	return desc;
 }
 
 static int sata_dwc_scr_read(struct ata_link *link, unsigned int scr, u32 *val)
@@ -892,21 +410,18 @@  static void sata_dwc_error_intr(struct ata_port *ap,
 	struct ata_queued_cmd *qc;
 	u32 serror;
 	u8 status, tag;
-	u32 err_reg;
 
 	ata_ehi_clear_desc(ehi);
 
 	serror = core_scr_read(SCR_ERROR);
 	status = ap->ops->sff_check_status(ap);
 
-	err_reg = in_le32(&(host_pvt.sata_dma_regs->interrupt_status.error.\
-			low));
 	tag = ap->link.active_tag;
 
-	dev_err(ap->dev, "%s SCR_ERROR=0x%08x intpr=0x%08x status=0x%08x "
-		"dma_intp=%d pending=%d issued=%d dma_err_status=0x%08x\n",
-		__func__, serror, intpr, status, host_pvt.dma_interrupt_count,
-		hsdevp->dma_pending[tag], hsdevp->cmd_issued[tag], err_reg);
+	dev_err(ap->dev,
+		"%s SCR_ERROR=0x%08x intpr=0x%08x status=0x%08x dma_intp=%d pending=%d issued=%d",
+		__func__, serror, intpr, status, hsdevp->dma_interrupt_count,
+		hsdevp->dma_pending[tag], hsdevp->cmd_issued[tag]);
 
 	/* Clear error register and interrupt bit */
 	clear_serror();
@@ -1033,7 +548,7 @@  DRVSTILLBUSY:
 			 * operation done interrupt. The command should be
 			 * completed only after both interrupts are seen.
 			 */
-			host_pvt.dma_interrupt_count++;
+			hsdevp->dma_interrupt_count++;
 			if (hsdevp->dma_pending[tag] == \
 					SATA_DWC_DMA_PENDING_NONE) {
 				dev_err(ap->dev,
@@ -1042,7 +557,7 @@  DRVSTILLBUSY:
 					hsdevp->dma_pending[tag]);
 			}
 
-			if ((host_pvt.dma_interrupt_count % 2) == 0)
+			if ((hsdevp->dma_interrupt_count % 2) == 0)
 				sata_dwc_dma_xfer_complete(ap, 1);
 		} else if (ata_is_pio(qc->tf.protocol)) {
 			ata_sff_hsm_move(ap, qc, status, 0);
@@ -1116,12 +631,12 @@  DRVSTILLBUSY:
 		dev_dbg(ap->dev, "%s NCQ command, protocol: %s\n", __func__,
 			get_prot_descript(qc->tf.protocol));
 		if (ata_is_dma(qc->tf.protocol)) {
-			host_pvt.dma_interrupt_count++;
+			hsdevp->dma_interrupt_count++;
 			if (hsdevp->dma_pending[tag] == \
 					SATA_DWC_DMA_PENDING_NONE)
 				dev_warn(ap->dev, "%s: DMA not pending?\n",
 					__func__);
-			if ((host_pvt.dma_interrupt_count % 2) == 0)
+			if ((hsdevp->dma_interrupt_count % 2) == 0)
 				sata_dwc_dma_xfer_complete(ap, 1);
 		} else {
 			if (unlikely(sata_dwc_qc_complete(ap, qc, 1)))
@@ -1269,6 +784,18 @@  static void sata_dwc_enable_interrupts(struct sata_dwc_device *hsdev)
 		in_le32(&hsdev->sata_dwc_regs->errmr));
 }
 
+static bool sata_dwc_dma_filter(struct dma_chan *chan, void *param)
+{
+	struct sata_dwc_device_port *hsdevp = param;
+	struct dw_dma_slave *dws = hsdevp->dws;
+
+	if (dws->dma_dev != chan->device->dev)
+		return false;
+
+	chan->private = dws;
+	return true;
+}
+
 static void sata_dwc_setup_port(struct ata_ioports *port, unsigned long base)
 {
 	port->cmd_addr = (void __iomem *)base + 0x00;
@@ -1303,6 +830,7 @@  static int sata_dwc_port_start(struct ata_port *ap)
 	struct sata_dwc_device *hsdev;
 	struct sata_dwc_device_port *hsdevp = NULL;
 	struct device *pdev;
+	dma_cap_mask_t mask;
 	int i;
 
 	hsdev = HSDEV_FROM_AP(ap);
@@ -1326,29 +854,27 @@  static int sata_dwc_port_start(struct ata_port *ap)
 	}
 	hsdevp->hsdev = hsdev;
 
+	hsdevp->dws = &sata_dwc_dma_dws;
+	hsdevp->dws->dma_dev = host_pvt.dwc_dev;
+
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
+
+	/* Acquire DMA channel */
+	hsdevp->chan = dma_request_channel(mask, sata_dwc_dma_filter, hsdevp);
+	if (!hsdevp->chan) {
+		dev_err(host_pvt.dwc_dev, "%s: dma channel unavailable\n",
+			 __func__);
+		err = -EAGAIN;
+		goto CLEANUP_ALLOC;
+	}
+
 	for (i = 0; i < SATA_DWC_QCMD_MAX; i++)
 		hsdevp->cmd_issued[i] = SATA_DWC_CMD_ISSUED_NOT;
 
 	ap->bmdma_prd = NULL;	/* set these so libata doesn't use them */
 	ap->bmdma_prd_dma = 0;
 
-	/*
-	 * DMA - Assign scatter gather LLI table. We can't use the libata
-	 * version since it's PRD is IDE PCI specific.
-	 */
-	for (i = 0; i < SATA_DWC_QCMD_MAX; i++) {
-		hsdevp->llit[i] = dma_alloc_coherent(pdev,
-						     SATA_DWC_DMAC_LLI_TBL_SZ,
-						     &(hsdevp->llit_dma[i]),
-						     GFP_ATOMIC);
-		if (!hsdevp->llit[i]) {
-			dev_err(ap->dev, "%s: dma_alloc_coherent failed\n",
-				 __func__);
-			err = -ENOMEM;
-			goto CLEANUP_ALLOC;
-		}
-	}
-
 	if (ap->port_no == 0)  {
 		dev_dbg(ap->dev, "%s: clearing TXCHEN, RXCHEN in DMAC\n",
 			__func__);
@@ -1377,22 +903,14 @@  CLEANUP:
 
 static void sata_dwc_port_stop(struct ata_port *ap)
 {
-	int i;
-	struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
 	struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
 
 	dev_dbg(ap->dev, "%s: ap->id = %d\n", __func__, ap->print_id);
 
-	if (hsdevp && hsdev) {
-		/* deallocate LLI table */
-		for (i = 0; i < SATA_DWC_QCMD_MAX; i++) {
-			dma_free_coherent(ap->host->dev,
-					  SATA_DWC_DMAC_LLI_TBL_SZ,
-					 hsdevp->llit[i], hsdevp->llit_dma[i]);
-		}
+	dmaengine_terminate_all(hsdevp->chan);
+	dma_release_channel(hsdevp->chan);
 
-		kfree(hsdevp);
-	}
+	kfree(hsdevp);
 	ap->private_data = NULL;
 }
 
@@ -1448,12 +966,12 @@  static void sata_dwc_bmdma_setup(struct ata_queued_cmd *qc)
 static void sata_dwc_bmdma_start_by_tag(struct ata_queued_cmd *qc, u8 tag)
 {
 	int start_dma;
-	u32 reg, dma_chan;
+	u32 reg;
 	struct sata_dwc_device *hsdev = HSDEV_FROM_QC(qc);
 	struct ata_port *ap = qc->ap;
 	struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+	struct dma_async_tx_descriptor *desc = hsdevp->desc[tag];
 	int dir = qc->dma_dir;
-	dma_chan = hsdevp->dma_chan[tag];
 
 	if (hsdevp->cmd_issued[tag] != SATA_DWC_CMD_ISSUED_NOT) {
 		start_dma = 1;
@@ -1489,7 +1007,8 @@  static void sata_dwc_bmdma_start_by_tag(struct ata_queued_cmd *qc, u8 tag)
 				SATA_DWC_DMACR_RXCHEN);
 
 		/* Enable AHB DMA transfer on the specified channel */
-		dma_dwc_xfer_start(dma_chan);
+		dmaengine_submit(desc);
+		dma_async_issue_pending(hsdevp->chan);
 	}
 }
 
@@ -1515,26 +1034,21 @@  static void sata_dwc_bmdma_start(struct ata_queued_cmd *qc)
  */
 static void sata_dwc_qc_prep_by_tag(struct ata_queued_cmd *qc, u8 tag)
 {
-	struct scatterlist *sg = qc->sg;
+	struct dma_async_tx_descriptor *desc;
 	struct ata_port *ap = qc->ap;
-	int dma_chan;
-	struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
 	struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
 
 	dev_dbg(ap->dev, "%s: port=%d dma dir=%s n_elem=%d\n",
 		__func__, ap->port_no, get_dma_dir_descript(qc->dma_dir),
 		 qc->n_elem);
 
-	dma_chan = dma_dwc_xfer_setup(sg, qc->n_elem, hsdevp->llit[tag],
-				      hsdevp->llit_dma[tag],
-				      (void __iomem *)&hsdev->sata_dwc_regs->dmadr,
-				      qc->dma_dir);
-	if (dma_chan < 0) {
-		dev_err(ap->dev, "%s: dma_dwc_xfer_setup returns err %d\n",
-			__func__, dma_chan);
+	desc = dma_dwc_xfer_setup(qc);
+	if (!desc) {
+		dev_err(ap->dev, "%s: dma_dwc_xfer_setup returns NULL\n",
+			__func__);
 		return;
 	}
-	hsdevp->dma_chan[tag] = dma_chan;
+	hsdevp->desc[tag] = desc;
 }
 
 static unsigned int sata_dwc_qc_issue(struct ata_queued_cmd *qc)
@@ -1678,7 +1192,6 @@  static int sata_dwc_probe(struct platform_device *ofdev)
 	struct ata_port_info pi = sata_dwc_port_info[0];
 	const struct ata_port_info *ppi[] = { &pi, NULL };
 	struct device_node *np = ofdev->dev.of_node;
-	u32 dma_chan;
 
 	/* Allocate DWC SATA device */
 	host = ata_host_alloc_pinfo(&ofdev->dev, ppi, SATA_DWC_MAX_PORTS);
@@ -1688,13 +1201,6 @@  static int sata_dwc_probe(struct platform_device *ofdev)
 
 	host->private_data = hsdev;
 
-	if (of_property_read_u32(np, "dma-channel", &dma_chan)) {
-		dev_warn(&ofdev->dev, "no dma-channel property set."
-			 " Use channel 0\n");
-		dma_chan = 0;
-	}
-	host_pvt.dma_channel = dma_chan;
-
 	/* Ioremap SATA registers */
 	base = of_iomap(np, 0);
 	if (!base) {
@@ -1721,16 +1227,16 @@  static int sata_dwc_probe(struct platform_device *ofdev)
 		   idr, ver[0], ver[1], ver[2]);
 
 	/* Get SATA DMA interrupt number */
-	irq = irq_of_parse_and_map(np, 1);
-	if (irq == NO_IRQ) {
+	hsdev->dma->irq = irq_of_parse_and_map(np, 1);
+	if (hsdev->dma->irq == NO_IRQ) {
 		dev_err(&ofdev->dev, "no SATA DMA irq\n");
 		err = -ENODEV;
 		goto error_iomap;
 	}
 
 	/* Get physical SATA DMA register base address */
-	host_pvt.sata_dma_regs = (void *)of_iomap(np, 1);
-	if (!(host_pvt.sata_dma_regs)) {
+	hsdev->dma->regs = of_iomap(np, 1);
+	if (!hsdev->dma->regs) {
 		dev_err(&ofdev->dev,
 			"ioremap failed for AHBDMA register address\n");
 		err = -ENODEV;
@@ -1740,8 +1246,10 @@  static int sata_dwc_probe(struct platform_device *ofdev)
 	/* Save dev for later use in dev_xxx() routines */
 	host_pvt.dwc_dev = &ofdev->dev;
 
+	hsdev->dma->dev = &ofdev->dev;
+
 	/* Initialize AHB DMAC */
-	err = dma_dwc_init(hsdev, irq);
+	err = dw_dma_probe(hsdev->dma, NULL);
 	if (err)
 		goto error_dma_iomap;
 
@@ -1770,9 +1278,9 @@  static int sata_dwc_probe(struct platform_device *ofdev)
 
 error_out:
 	/* Free SATA DMA resources */
-	dma_dwc_exit(hsdev);
+	dw_dma_remove(hsdev->dma);
 error_dma_iomap:
-	iounmap((void __iomem *)host_pvt.sata_dma_regs);
+	iounmap(hsdev->dma->regs);
 error_iomap:
 	iounmap(base);
 	return err;
@@ -1787,9 +1295,9 @@  static int sata_dwc_remove(struct platform_device *ofdev)
 	ata_host_detach(host);
 
 	/* Free SATA DMA resources */
-	dma_dwc_exit(hsdev);
+	dw_dma_remove(hsdev->dma);
 
-	iounmap((void __iomem *)host_pvt.sata_dma_regs);
+	iounmap(hsdev->dma->regs);
 	iounmap(hsdev->reg_base);
 	dev_dbg(&ofdev->dev, "done\n");
 	return 0;