From patchwork Wed Nov 7 11:22:46 2012 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jean-Christophe PLAGNIOL-VILLARD X-Patchwork-Id: 197682 X-Patchwork-Delegate: davem@davemloft.net Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 0F8FA2C00AA for ; Thu, 8 Nov 2012 02:04:46 +1100 (EST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754442Ab2KGPEd (ORCPT ); Wed, 7 Nov 2012 10:04:33 -0500 Received: from 8.mo1.mail-out.ovh.net ([178.33.110.239]:43710 "EHLO mo1.mail-out.ovh.net" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1754414Ab2KGPEb (ORCPT ); Wed, 7 Nov 2012 10:04:31 -0500 X-Greylist: delayed 8405 seconds by postgrey-1.27 at vger.kernel.org; Wed, 07 Nov 2012 10:04:31 EST Received: from mail239.ha.ovh.net (b9.ovh.net [213.186.33.59]) by mo1.mail-out.ovh.net (Postfix) with SMTP id 265FAFFA5A3 for ; Wed, 7 Nov 2012 12:36:35 +0100 (CET) Received: from b0.ovh.net (HELO queueout) (213.186.33.50) by b0.ovh.net with SMTP; 7 Nov 2012 13:25:52 +0200 Received: from ns32433.ovh.net (HELO localhost) (plagnioj%jcrosoft.com@213.251.161.87) by ns0.ovh.net with SMTP; 7 Nov 2012 13:25:49 +0200 From: Jean-Christophe PLAGNIOL-VILLARD To: linux-arm-kernel@lists.infradead.org Cc: Jean-Christophe PLAGNIOL-VILLARD , Nicolas Ferre , linux-ide@vger.kernel.org, linux-input@vger.kernel.org, linux-mmc@vger.kernel.org, linux-can@vger.kernel.org, netdev@vger.kernel.org, linux-pcmcia@lists.infradead.org, rtc-linux@googlegroups.com, spi-devel-general@lists.sourceforge.net, linux-serial@vger.kernel.org, linux-usb@vger.kernel.org, linux-fbdev@vger.kernel.org X-Ovh-Mailout: 178.32.228.1 (mo1.mail-out.ovh.net) Subject: [PATCH 02/10] arm: at91: move platfarm_data to include/linux/platform_data/atmel.h Date: Wed, 7 Nov 2012 12:22:46 +0100 Message-Id: <1352287374-25176-2-git-send-email-plagnioj@jcrosoft.com> X-Mailer: git-send-email 1.7.10 In-Reply-To: <1352287374-25176-1-git-send-email-plagnioj@jcrosoft.com> References: <20121107111235.GH20063@game.jcrosoft.org> <1352287374-25176-1-git-send-email-plagnioj@jcrosoft.com> X-Ovh-Tracer-Id: 4975070213793295357 X-Ovh-Remote: 213.251.161.87 (ns32433.ovh.net) X-Ovh-Local: 213.186.33.20 (ns0.ovh.net) X-OVH-SPAMSTATE: OK X-OVH-SPAMSCORE: -100 X-OVH-SPAMCAUSE: gggruggvucftvghtrhhoucdtuddrfeehfedrfeelucetufdoteggodetrfcurfhrohhfihhlvgemucfqggfjnecuuegrihhlohhuthemuceftddtnecusecvtfgvtghiphhivghnthhsucdlqddutddtmdenucfhrhhomheplfgvrghnqdevhhhrihhsthhophhhvgcurffntefipffkqffnqdggkffnnfettfffuceophhlrghgnhhiohhjsehjtghrohhsohhfthdrtghomheqnecujfgurhephffvufffkffojghfsedttdertdertddt X-Spam-Check: DONE|U 0.5/N X-VR-SPAMSTATE: OK X-VR-SPAMSCORE: -100 X-VR-SPAMCAUSE: gggruggvucftvghtrhhoucdtuddrfeehfedrfeelucetufdoteggodetrfcurfhrohhfihhlvgemucfqggfjnecuuegrihhlohhuthemuceftddtnecusecvtfgvtghiphhivghnthhsucdlqddutddtmdenucfhrhhomheplfgvrghnqdevhhhrihhsthhophhhvgcurffntefipffkqffnqdggkffnnfettfffuceophhlrghgnhhiohhjsehjtghrohhsohhfthdrtghomheqnecujfgurhephffvufffkffojghfsedttdertdertddt Sender: linux-ide-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-ide@vger.kernel.org Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: Nicolas Ferre Cc: linux-ide@vger.kernel.org Cc: linux-input@vger.kernel.org Cc: linux-mmc@vger.kernel.org Cc: linux-can@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-pcmcia@lists.infradead.org Cc: rtc-linux@googlegroups.com Cc: spi-devel-general@lists.sourceforge.net Cc: linux-serial@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: linux-fbdev@vger.kernel.org Acked-by: Dmitry Torokhov --- HI all, If it's ok with everyone this will go via at91 with the patch serie than clean up the include/mach For preparation to switch to arm multiarch kernel Best Regards, J. arch/arm/mach-at91/include/mach/board.h | 55 ---------------------- arch/avr32/mach-at32ap/include/mach/board.h | 7 --- drivers/ata/pata_at91.c | 2 +- drivers/input/touchscreen/atmel_tsadcc.c | 2 +- drivers/mmc/host/atmel-mci.c | 2 +- drivers/net/can/at91_can.c | 3 +- drivers/net/ethernet/cadence/at91_ether.c | 2 +- drivers/pcmcia/at91_cf.c | 2 +- drivers/rtc/rtc-at91sam9.c | 2 +- drivers/spi/spi-atmel.c | 2 +- drivers/tty/serial/atmel_serial.c | 2 +- drivers/usb/gadget/at91_udc.c | 2 +- drivers/usb/gadget/atmel_usba_udc.c | 2 +- drivers/usb/host/ohci-at91.c | 2 +- drivers/video/atmel_lcdfb.c | 2 +- include/linux/platform_data/atmel.h | 67 +++++++++++++++++++++++++++ 16 files changed, 80 insertions(+), 76 deletions(-) diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index c55a436..662451d 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -31,42 +31,15 @@ #ifndef __ASM_ARCH_BOARD_H #define __ASM_ARCH_BOARD_H -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include #include /* USB Device */ -struct at91_udc_data { - int vbus_pin; /* high == host powering us */ - u8 vbus_active_low; /* vbus polarity */ - u8 vbus_polled; /* Use polling, not interrupt */ - int pullup_pin; /* active == D+ pulled up */ - u8 pullup_active_low; /* true == pullup_pin is active low */ -}; extern void __init at91_add_device_udc(struct at91_udc_data *data); /* USB High Speed Device */ extern void __init at91_add_device_usba(struct usba_platform_data *data); /* Compact Flash */ -struct at91_cf_data { - int irq_pin; /* I/O IRQ */ - int det_pin; /* Card detect */ - int vcc_pin; /* power switching */ - int rst_pin; /* card reset */ - u8 chipselect; /* EBI Chip Select number */ - u8 flags; -#define AT91_CF_TRUE_IDE 0x01 -#define AT91_IDE_SWAP_A0_A2 0x02 -}; extern void __init at91_add_device_cf(struct at91_cf_data *data); /* MMC / SD */ @@ -86,16 +59,6 @@ extern void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *d extern void __init at91_add_device_eth(struct macb_platform_data *data); /* USB Host */ -#define AT91_MAX_USBH_PORTS 3 -struct at91_usbh_data { - int vbus_pin[AT91_MAX_USBH_PORTS]; /* port power-control pin */ - int overcurrent_pin[AT91_MAX_USBH_PORTS]; - u8 ports; /* number of ports on root hub */ - u8 overcurrent_supported; - u8 vbus_pin_active_low[AT91_MAX_USBH_PORTS]; - u8 overcurrent_status[AT91_MAX_USBH_PORTS]; - u8 overcurrent_changed[AT91_MAX_USBH_PORTS]; -}; extern void __init at91_add_device_usbh(struct at91_usbh_data *data); extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data); extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data); @@ -124,13 +87,6 @@ extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pin extern struct platform_device *atmel_default_console_device; -struct atmel_uart_data { - int num; /* port num */ - short use_dma_tx; /* use transmit DMA? */ - short use_dma_rx; /* use receive DMA? */ - void __iomem *regs; /* virt. base address, if any */ - struct serial_rs485 rs485; /* rs485 settings */ -}; extern void __init at91_add_device_serial(void); /* @@ -173,24 +129,13 @@ extern void __init at91_add_device_isi(struct isi_platform_data *data, bool use_pck_as_mck); /* Touchscreen Controller */ -struct at91_tsadcc_data { - unsigned int adc_clock; - u8 pendet_debounce; - u8 ts_sample_hold_time; -}; extern void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data); /* CAN */ -struct at91_can_data { - void (*transceiver_switch)(int on); -}; extern void __init at91_add_device_can(struct at91_can_data *data); /* LEDs */ extern void __init at91_gpio_leds(struct gpio_led *leds, int nr); extern void __init at91_pwm_leds(struct gpio_led *leds, int nr); -/* FIXME: this needs a better location, but gets stuff building again */ -extern int at91_suspend_entering_slow_clock(void); - #endif diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h index 70742ec..dca9345 100644 --- a/arch/avr32/mach-at32ap/include/mach/board.h +++ b/arch/avr32/mach-at32ap/include/mach/board.h @@ -34,13 +34,6 @@ extern struct platform_device *atmel_default_console_device; #define ATMEL_USART_CTS 0x02 #define ATMEL_USART_CLK 0x04 -struct atmel_uart_data { - int num; /* port num */ - short use_dma_tx; /* use transmit DMA? */ - short use_dma_rx; /* use receive DMA? */ - void __iomem *regs; /* virtual base address, if any */ - struct serial_rs485 rs485; /* rs485 settings */ -}; void at32_map_usart(unsigned int hw_id, unsigned int line, int flags); struct platform_device *at32_add_device_usart(unsigned int id); diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c index 53d3770..2a96bb2 100644 --- a/drivers/ata/pata_at91.c +++ b/drivers/ata/pata_at91.c @@ -27,9 +27,9 @@ #include #include #include +#include #include -#include #include #define DRV_NAME "pata_at91" diff --git a/drivers/input/touchscreen/atmel_tsadcc.c b/drivers/input/touchscreen/atmel_tsadcc.c index 201b2d2..ea392ee 100644 --- a/drivers/input/touchscreen/atmel_tsadcc.c +++ b/drivers/input/touchscreen/atmel_tsadcc.c @@ -22,7 +22,7 @@ #include #include #include -#include +#include #include /* Register definitions based on AT91SAM9RL64 preliminary draft datasheet */ diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index ddf096e..8689989 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include @@ -40,7 +41,6 @@ #include #include -#include #include "atmel-mci-regs.h" diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c index fcff73a..994b6ac 100644 --- a/drivers/net/can/at91_can.c +++ b/drivers/net/can/at91_can.c @@ -33,12 +33,11 @@ #include #include #include +#include #include #include -#include - #define AT91_MB_MASK(i) ((1 << (i)) - 1) /* Common registers */ diff --git a/drivers/net/ethernet/cadence/at91_ether.c b/drivers/net/ethernet/cadence/at91_ether.c index 4e980a7..35fc6edb 100644 --- a/drivers/net/ethernet/cadence/at91_ether.c +++ b/drivers/net/ethernet/cadence/at91_ether.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include @@ -38,7 +39,6 @@ #include #include -#include #include "at91_ether.h" diff --git a/drivers/pcmcia/at91_cf.c b/drivers/pcmcia/at91_cf.c index 9694c1e..01463c7 100644 --- a/drivers/pcmcia/at91_cf.c +++ b/drivers/pcmcia/at91_cf.c @@ -17,6 +17,7 @@ #include #include #include +#include #include @@ -24,7 +25,6 @@ #include #include -#include #include #include diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c index 2dfe7a2..e981798 100644 --- a/drivers/rtc/rtc-at91sam9.c +++ b/drivers/rtc/rtc-at91sam9.c @@ -19,8 +19,8 @@ #include #include #include +#include -#include #include #include diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c index 16d6a83..61fb0ec 100644 --- a/drivers/spi/spi-atmel.c +++ b/drivers/spi/spi-atmel.c @@ -19,9 +19,9 @@ #include #include #include +#include #include -#include #include #include diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 3d7e1ee..5660ec2 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -39,12 +39,12 @@ #include #include #include +#include #include #include #include -#include #ifdef CONFIG_ARM #include diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index 89d90b5..a7b042b 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include @@ -38,7 +39,6 @@ #include #include -#include #include #include #include diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c index 9a9bced..a7aed84 100644 --- a/drivers/usb/gadget/atmel_usba_udc.c +++ b/drivers/usb/gadget/atmel_usba_udc.c @@ -21,9 +21,9 @@ #include #include #include +#include #include -#include #include "atmel_usba_udc.h" diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 0bf72f9..8e62f81 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -16,11 +16,11 @@ #include #include #include +#include #include #include -#include #include #ifndef CONFIG_ARCH_AT91 diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index 94cac9f..12cf5f3 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -19,8 +19,8 @@ #include #include #include +#include -#include #include #include diff --git a/include/linux/platform_data/atmel.h b/include/linux/platform_data/atmel.h index b0f2c56..dbd6d53 100644 --- a/include/linux/platform_data/atmel.h +++ b/include/linux/platform_data/atmel.h @@ -8,6 +8,49 @@ #define __ATMEL_H__ #include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + /* USB Device */ +struct at91_udc_data { + int vbus_pin; /* high == host powering us */ + u8 vbus_active_low; /* vbus polarity */ + u8 vbus_polled; /* Use polling, not interrupt */ + int pullup_pin; /* active == D+ pulled up */ + u8 pullup_active_low; /* true == pullup_pin is active low */ +}; + + /* Compact Flash */ +struct at91_cf_data { + int irq_pin; /* I/O IRQ */ + int det_pin; /* Card detect */ + int vcc_pin; /* power switching */ + int rst_pin; /* card reset */ + u8 chipselect; /* EBI Chip Select number */ + u8 flags; +#define AT91_CF_TRUE_IDE 0x01 +#define AT91_IDE_SWAP_A0_A2 0x02 +}; + + /* USB Host */ +#define AT91_MAX_USBH_PORTS 3 +struct at91_usbh_data { + int vbus_pin[AT91_MAX_USBH_PORTS]; /* port power-control pin */ + int overcurrent_pin[AT91_MAX_USBH_PORTS]; + u8 ports; /* number of ports on root hub */ + u8 overcurrent_supported; + u8 vbus_pin_active_low[AT91_MAX_USBH_PORTS]; + u8 overcurrent_status[AT91_MAX_USBH_PORTS]; + u8 overcurrent_changed[AT91_MAX_USBH_PORTS]; +}; /* NAND / SmartMedia */ struct atmel_nand_data { @@ -24,4 +67,28 @@ struct atmel_nand_data { unsigned int num_parts; }; + /* Serial */ +struct atmel_uart_data { + int num; /* port num */ + short use_dma_tx; /* use transmit DMA? */ + short use_dma_rx; /* use receive DMA? */ + void __iomem *regs; /* virt. base address, if any */ + struct serial_rs485 rs485; /* rs485 settings */ +}; + + /* Touchscreen Controller */ +struct at91_tsadcc_data { + unsigned int adc_clock; + u8 pendet_debounce; + u8 ts_sample_hold_time; +}; + +/* CAN */ +struct at91_can_data { + void (*transceiver_switch)(int on); +}; + +/* FIXME: this needs a better location, but gets stuff building again */ +extern int at91_suspend_entering_slow_clock(void); + #endif /* __ATMEL_H__ */