diff mbox series

[v7,01/10] mfd: nct6694: Move module type macros to shared header

Message ID 20260821033505.4017901-2-a0282524688@gmail.com
State New
Headers show
Series [v7,01/10] mfd: nct6694: Move module type macros to shared header | expand

Commit Message

Ming Yu Aug. 21, 2026, 3:34 a.m. UTC 
From: Ming Yu <a0282524688@gmail.com>

Move NCT6694_XXX_MOD macro definitions from individual sub-device
drivers into the shared header include/linux/mfd/nct6694.h.

This is a prerequisite for supporting multiple transport interfaces
(USB, HIF) without duplicating these definitions.

No functional change.

Signed-off-by: Ming Yu <a0282524688@gmail.com>
---
Changes in v7:

Changes in v6:

Changes in v5:
- Split from the monolithic v4 patch to follow the single logical change
  principle.

 drivers/gpio/gpio-nct6694.c         |  7 -------
 drivers/hwmon/nct6694-hwmon.c       | 21 ---------------------
 drivers/i2c/busses/i2c-nct6694.c    |  7 -------
 drivers/net/can/usb/nct6694_canfd.c |  6 ------
 drivers/rtc/rtc-nct6694.c           |  7 -------
 drivers/watchdog/nct6694_wdt.c      |  7 -------
 include/linux/mfd/nct6694.h         |  9 +++++++++
 7 files changed, 9 insertions(+), 55 deletions(-)
diff mbox series

Patch

diff --git a/drivers/gpio/gpio-nct6694.c b/drivers/gpio/gpio-nct6694.c
index a8607f0d9915..53bfc5983648 100644
--- a/drivers/gpio/gpio-nct6694.c
+++ b/drivers/gpio/gpio-nct6694.c
@@ -13,13 +13,6 @@ 
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-/*
- * USB command module type for NCT6694 GPIO controller.
- * This defines the module type used for communication with the NCT6694
- * GPIO controller over the USB interface.
- */
-#define NCT6694_GPIO_MOD	0xFF
-
 #define NCT6694_GPIO_VER	0x90
 #define NCT6694_GPIO_VALID	0x110
 #define NCT6694_GPI_DATA	0x120
diff --git a/drivers/hwmon/nct6694-hwmon.c b/drivers/hwmon/nct6694-hwmon.c
index 6dcf22ca5018..581451875f2c 100644
--- a/drivers/hwmon/nct6694-hwmon.c
+++ b/drivers/hwmon/nct6694-hwmon.c
@@ -15,13 +15,6 @@ 
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 
-/*
- * USB command module type for NCT6694 report channel
- * This defines the module type used for communication with the NCT6694
- * report channel over the USB interface.
- */
-#define NCT6694_RPT_MOD			0xFF
-
 /* Report channel */
 /*
  * The report channel is used to report the status of the hardware monitor
@@ -38,13 +31,6 @@ 
 #define NCT6694_TIN_STS(x)		(0x6A + (x))
 #define NCT6694_FIN_STS(x)		(0x6E + (x))
 
-/*
- * USB command module type for NCT6694 HWMON controller.
- * This defines the module type used for communication with the NCT6694
- * HWMON controller over the USB interface.
- */
-#define NCT6694_HWMON_MOD		0x00
-
 /* Command 00h - Hardware Monitor Control */
 #define NCT6694_HWMON_CONTROL		0x00
 #define NCT6694_HWMON_CONTROL_SEL	0x00
@@ -53,13 +39,6 @@ 
 #define NCT6694_HWMON_ALARM		0x02
 #define NCT6694_HWMON_ALARM_SEL		0x00
 
-/*
- * USB command module type for NCT6694 PWM controller.
- * This defines the module type used for communication with the NCT6694
- * PWM controller over the USB interface.
- */
-#define NCT6694_PWM_MOD			0x01
-
 /* PWM Command - Manual Control */
 #define NCT6694_PWM_CONTROL		0x01
 #define NCT6694_PWM_CONTROL_SEL		0x00
diff --git a/drivers/i2c/busses/i2c-nct6694.c b/drivers/i2c/busses/i2c-nct6694.c
index 1413ab6f9462..ef3329f34246 100644
--- a/drivers/i2c/busses/i2c-nct6694.c
+++ b/drivers/i2c/busses/i2c-nct6694.c
@@ -12,13 +12,6 @@ 
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-/*
- * USB command module type for NCT6694 I2C controller.
- * This defines the module type used for communication with the NCT6694
- * I2C controller over the USB interface.
- */
-#define NCT6694_I2C_MOD			0x03
-
 /* Command 00h - I2C Deliver */
 #define NCT6694_I2C_DELIVER		0x00
 #define NCT6694_I2C_DELIVER_SEL		0x00
diff --git a/drivers/net/can/usb/nct6694_canfd.c b/drivers/net/can/usb/nct6694_canfd.c
index e5f7f8849a73..262b4c26c9d4 100644
--- a/drivers/net/can/usb/nct6694_canfd.c
+++ b/drivers/net/can/usb/nct6694_canfd.c
@@ -18,12 +18,6 @@ 
 
 #define DEVICE_NAME "nct6694-canfd"
 
-/* USB command module type for NCT6694 CANfd controller.
- * This defines the module type used for communication with the NCT6694
- * CANfd controller over the USB interface.
- */
-#define NCT6694_CANFD_MOD			0x05
-
 /* Command 00h - CAN Setting and Initialization */
 #define NCT6694_CANFD_SETTING			0x00
 #define NCT6694_CANFD_SETTING_ACTIVE_CTRL1	BIT(0)
diff --git a/drivers/rtc/rtc-nct6694.c b/drivers/rtc/rtc-nct6694.c
index 35401a0d9cf5..c06902f150c9 100644
--- a/drivers/rtc/rtc-nct6694.c
+++ b/drivers/rtc/rtc-nct6694.c
@@ -14,13 +14,6 @@ 
 #include <linux/rtc.h>
 #include <linux/slab.h>
 
-/*
- * USB command module type for NCT6694 RTC controller.
- * This defines the module type used for communication with the NCT6694
- * RTC controller over the USB interface.
- */
-#define NCT6694_RTC_MOD		0x08
-
 /* Command 00h - RTC Time */
 #define NCT6694_RTC_TIME	0x0000
 #define NCT6694_RTC_TIME_SEL	0x00
diff --git a/drivers/watchdog/nct6694_wdt.c b/drivers/watchdog/nct6694_wdt.c
index bc3689bd4b6b..4c06ac105562 100644
--- a/drivers/watchdog/nct6694_wdt.c
+++ b/drivers/watchdog/nct6694_wdt.c
@@ -20,13 +20,6 @@ 
 
 #define NCT6694_WDT_MAX_DEVS		2
 
-/*
- * USB command module type for NCT6694 WDT controller.
- * This defines the module type used for communication with the NCT6694
- * WDT controller over the USB interface.
- */
-#define NCT6694_WDT_MOD			0x07
-
 /* Command 00h - WDT Setup */
 #define NCT6694_WDT_SETUP		0x00
 #define NCT6694_WDT_SETUP_SEL(idx)	(idx ? 0x01 : 0x00)
diff --git a/include/linux/mfd/nct6694.h b/include/linux/mfd/nct6694.h
index 6eb9be2cd4a0..3c683e317aa3 100644
--- a/include/linux/mfd/nct6694.h
+++ b/include/linux/mfd/nct6694.h
@@ -8,6 +8,15 @@ 
 #ifndef __MFD_NCT6694_H
 #define __MFD_NCT6694_H
 
+#define NCT6694_HWMON_MOD	0x00
+#define NCT6694_PWM_MOD		0x01
+#define NCT6694_I2C_MOD		0x03
+#define NCT6694_CANFD_MOD	0x05
+#define NCT6694_WDT_MOD		0x07
+#define NCT6694_RTC_MOD		0x08
+#define NCT6694_RPT_MOD		0xFF
+#define NCT6694_GPIO_MOD	NCT6694_RPT_MOD
+
 #define NCT6694_VENDOR_ID	0x0416
 #define NCT6694_PRODUCT_ID	0x200B
 #define NCT6694_INT_IN_EP	0x81