| Message ID | 20240506154520.3886867-1-marc.ferland@sonatest.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | i2c: xiic: print error code when xiic_start_xfer fails | expand |
Hi Marc, On Mon, May 06, 2024 at 11:45:20AM -0400, marc.ferland@gmail.com wrote: > From: Marc Ferland <marc.ferland@sonatest.com> > > xiic_start_xfer can fail for different reasons: > > - EBUSY: bus is busy or i2c messages still in tx_msg or rx_msg > - ETIMEDOUT: timed-out trying to clear the RX fifo Wolfram has recently removed all the error printouts caused by etimedout. > - EINVAL: wrong clock settings > > Printing the error code helps identifying the root cause. > > Signed-off-by: Marc Ferland <marc.ferland@sonatest.com> > --- > drivers/i2c/busses/i2c-xiic.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c > index 71391b590ada..73729f0180a1 100644 > --- a/drivers/i2c/busses/i2c-xiic.c > +++ b/drivers/i2c/busses/i2c-xiic.c > @@ -1165,7 +1165,7 @@ static int xiic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) > > err = xiic_start_xfer(i2c, msgs, num); > if (err < 0) { > - dev_err(adap->dev.parent, "Error xiic_start_xfer\n"); > + dev_err(adap->dev.parent, "Error xiic_start_xfer: %d\n", err); I don't see the end user being interested in having the error number printed in the dmesg. In fact, I doubt the end user is interested in this message at all. We could print the debug messages (or warnings) where the actual failure occurs. For example, in the setclk case, a warning is already being printed, and I don't see why we should also print an error here. Does that make sense? Andi > goto out; > } > > -- > 2.34.1 >
On Wed, May 8, 2024 at 8:51 AM Andi Shyti <andi.shyti@kernel.org> wrote: > > Hi Marc, > > On Mon, May 06, 2024 at 11:45:20AM -0400, marc.ferland@gmail.com wrote: > > From: Marc Ferland <marc.ferland@sonatest.com> > > > > xiic_start_xfer can fail for different reasons: > > > > - EBUSY: bus is busy or i2c messages still in tx_msg or rx_msg > > - ETIMEDOUT: timed-out trying to clear the RX fifo > > Wolfram has recently removed all the error printouts caused by > etimedout. > > > - EINVAL: wrong clock settings > > > > Printing the error code helps identifying the root cause. > > > > Signed-off-by: Marc Ferland <marc.ferland@sonatest.com> > > --- > > drivers/i2c/busses/i2c-xiic.c | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c > > index 71391b590ada..73729f0180a1 100644 > > --- a/drivers/i2c/busses/i2c-xiic.c > > +++ b/drivers/i2c/busses/i2c-xiic.c > > @@ -1165,7 +1165,7 @@ static int xiic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) > > > > err = xiic_start_xfer(i2c, msgs, num); > > if (err < 0) { > > - dev_err(adap->dev.parent, "Error xiic_start_xfer\n"); > > + dev_err(adap->dev.parent, "Error xiic_start_xfer: %d\n", err); > > I don't see the end user being interested in having the error > number printed in the dmesg. In fact, I doubt the end user is > interested in this message at all. > > We could print the debug messages (or warnings) where the actual > failure occurs. For example, in the setclk case, a warning is > already being printed, and I don't see why we should also print > an error here. > > Does that make sense? > Yeah, it makes sense. My goal here is to add a bit more context when things go wrong. I've been having these _very_ rare failures with this i2c adapter and the only trace I am getting is this "Error xiic_start_xfer" message in the kernel logs. So it seemed like a good idea to just print the error code along with the message. I'll resend a v2 with your suggestions. Regards, Marc
diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c index 71391b590ada..73729f0180a1 100644 --- a/drivers/i2c/busses/i2c-xiic.c +++ b/drivers/i2c/busses/i2c-xiic.c @@ -1165,7 +1165,7 @@ static int xiic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) err = xiic_start_xfer(i2c, msgs, num); if (err < 0) { - dev_err(adap->dev.parent, "Error xiic_start_xfer\n"); + dev_err(adap->dev.parent, "Error xiic_start_xfer: %d\n", err); goto out; }