diff mbox series

[09/64] i2c: bcm2835: reword according to newest specification

Message ID 20240322132619.6389-10-wsa+renesas@sang-engineering.com
State Changes Requested
Headers show
Series i2c: reword i2c_algorithm according to newest specification | expand

Commit Message

Wolfram Sang March 22, 2024, 1:25 p.m. UTC
Match the wording of this driver wrt. the newest I2C v7, SMBus 3.2, I3C
specifications and replace "master/slave" with more appropriate terms.
They are also more specific because we distinguish now between a remote
entity ("client") and a local one ("target").

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
 drivers/i2c/busses/i2c-bcm2835.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

Comments

Florian Fainelli March 26, 2024, 12:44 p.m. UTC | #1
On 3/22/2024 6:25 AM, Wolfram Sang wrote:
> Match the wording of this driver wrt. the newest I2C v7, SMBus 3.2, I3C
> specifications and replace "master/slave" with more appropriate terms.
> They are also more specific because we distinguish now between a remote
> entity ("client") and a local one ("target").
> 
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Andi Shyti March 26, 2024, 7:03 p.m. UTC | #2
Hi Wolfram,

> @@ -391,7 +391,7 @@ static u32 bcm2835_i2c_func(struct i2c_adapter *adap)
>  }
>  
>  static const struct i2c_algorithm bcm2835_i2c_algo = {
> -	.master_xfer	= bcm2835_i2c_xfer,
> +	.xfer	= bcm2835_i2c_xfer,

Here you are breaking the alignment (even though I think a "tab"
alignment is not needed).

Andi
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c
index b92de1944221..62776e7fc586 100644
--- a/drivers/i2c/busses/i2c-bcm2835.c
+++ b/drivers/i2c/busses/i2c-bcm2835.c
@@ -1,6 +1,6 @@ 
 // SPDX-License-Identifier: GPL-2.0
 /*
- * BCM2835 master mode driver
+ * BCM2835 host controller mode driver
  */
 
 #include <linux/clk.h>
@@ -25,7 +25,7 @@ 
 #define BCM2835_I2C_DEL		0x18
 /*
  * 16-bit field for the number of SCL cycles to wait after rising SCL
- * before deciding the slave is not responding. 0 disables the
+ * before deciding the client is not responding. 0 disables the
  * timeout detection.
  */
 #define BCM2835_I2C_CLKT	0x1c
@@ -223,7 +223,7 @@  static void bcm2835_drain_rxfifo(struct bcm2835_i2c_dev *i2c_dev)
 /*
  * Repeated Start Condition (Sr)
  * The BCM2835 ARM Peripherals datasheet mentions a way to trigger a Sr when it
- * talks about reading from a slave with 10 bit address. This is achieved by
+ * talks about reading from a client with 10 bit address. This is achieved by
  * issuing a write, poll the I2CS.TA flag and wait for it to be set, and then
  * issue a read.
  * A comment in https://github.com/raspberrypi/linux/issues/254 shows how the
@@ -391,7 +391,7 @@  static u32 bcm2835_i2c_func(struct i2c_adapter *adap)
 }
 
 static const struct i2c_algorithm bcm2835_i2c_algo = {
-	.master_xfer	= bcm2835_i2c_xfer,
+	.xfer	= bcm2835_i2c_xfer,
 	.functionality	= bcm2835_i2c_func,
 };