| Message ID | 20240215-mbly-i2c-v1-12-19a336e91dca@bootlin.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add Mobileye EyeQ5 support to the Nomadik I2C controller & use hrtimers for timeouts | expand |
On 15/02/2024 17:52, Théo Lebrun wrote: > Declare the temperature sensor on I2C bus 2. Its label is the schematics > identifier. > > Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> > --- > arch/mips/boot/dts/mobileye/eyeq5-epm5.dts | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts b/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts > index 6898b2d8267d..1f8549acd40d 100644 > --- a/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts > +++ b/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts > @@ -21,3 +21,11 @@ memory@0 { > <0x8 0x02000000 0x0 0x7E000000>; > }; > }; > + > +&i2c2 { > + tmp112@48 { Node names should be generic. See also an explanation and list of examples (not exhaustive) in DT specification: https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation temperature-sensor, power-sensor etc. Best regards, Krzysztof
diff --git a/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts b/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts index 6898b2d8267d..1f8549acd40d 100644 --- a/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts +++ b/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts @@ -21,3 +21,11 @@ memory@0 { <0x8 0x02000000 0x0 0x7E000000>; }; }; + +&i2c2 { + tmp112@48 { + compatible = "ti,tmp112"; + reg = <0x48>; + label = "U60"; + }; +};
Declare the temperature sensor on I2C bus 2. Its label is the schematics identifier. Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> --- arch/mips/boot/dts/mobileye/eyeq5-epm5.dts | 8 ++++++++ 1 file changed, 8 insertions(+)