@@ -300,6 +300,7 @@ struct dw_i2c_dev {
#define ACCESS_INTR_MASK BIT(0)
#define ACCESS_NO_IRQ_SUSPEND BIT(1)
+#define ACCESS_POLLING BIT(3)
#define SEMAPHORE_AMD_PSP (1 << 4)
#define SEMAPHORE_INTEL_PUNIT (2 << 4)
@@ -953,31 +953,6 @@ static int i2c_dw_init_recovery_info(struct dw_i2c_dev *dev)
return 0;
}
-static int i2c_dw_poll_adap_quirk(struct dw_i2c_dev *dev)
-{
- struct i2c_adapter *adap = &dev->adapter;
- int ret;
-
- pm_runtime_get_noresume(dev->dev);
- ret = i2c_add_numbered_adapter(adap);
- if (ret)
- dev_err(dev->dev, "Failed to add adapter: %d\n", ret);
- pm_runtime_put_noidle(dev->dev);
-
- return ret;
-}
-
-static bool i2c_dw_is_model_poll(struct dw_i2c_dev *dev)
-{
- switch (dev->flags & MODEL_MASK) {
- case MODEL_AMD_NAVI_GPU:
- case MODEL_WANGXUN_SP:
- return true;
- default:
- return false;
- }
-}
-
int i2c_dw_probe_master(struct dw_i2c_dev *dev)
{
struct i2c_adapter *adap = &dev->adapter;
@@ -1033,9 +1008,6 @@ int i2c_dw_probe_master(struct dw_i2c_dev *dev)
adap->dev.parent = dev->dev;
i2c_set_adapdata(adap, dev);
- if (i2c_dw_is_model_poll(dev))
- return i2c_dw_poll_adap_quirk(dev);
-
if (dev->flags & ACCESS_NO_IRQ_SUSPEND) {
irq_flags = IRQF_NO_SUSPEND;
} else {
@@ -1049,12 +1021,14 @@ int i2c_dw_probe_master(struct dw_i2c_dev *dev)
regmap_write(dev->map, DW_IC_INTR_MASK, 0);
i2c_dw_release_lock(dev);
- ret = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr, irq_flags,
- dev_name(dev->dev), dev);
- if (ret) {
- dev_err(dev->dev, "failure requesting irq %i: %d\n",
- dev->irq, ret);
- return ret;
+ if (!(dev->flags & ACCESS_POLLING)) {
+ ret = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr,
+ irq_flags, dev_name(dev->dev), dev);
+ if (ret) {
+ dev_err(dev->dev, "failure requesting irq %i: %d\n",
+ dev->irq, ret);
+ return ret;
+ }
}
ret = i2c_dw_init_recovery_info(dev);
@@ -154,7 +154,7 @@ static int navi_amd_setup(struct pci_dev *pdev, struct dw_pci_controller *c)
{
struct dw_i2c_dev *dev = dev_get_drvdata(&pdev->dev);
- dev->flags |= MODEL_AMD_NAVI_GPU;
+ dev->flags |= MODEL_AMD_NAVI_GPU | ACCESS_POLLING;
dev->timings.bus_freq_hz = I2C_MAX_STANDARD_MODE_FREQ;
return 0;
}
@@ -290,7 +290,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
dev->flags = (uintptr_t)device_get_match_data(&pdev->dev);
if (device_property_present(&pdev->dev, "wx,i2c-snps-model"))
- dev->flags = MODEL_WANGXUN_SP;
+ dev->flags = MODEL_WANGXUN_SP | ACCESS_POLLING;
dev->dev = &pdev->dev;
dev->irq = irq;
Currently initialization flow in i2c_dw_probe_master() skips a few steps and has code duplication for polling mode implementation. Simplify this by adding a new ACCESS_POLLING flag that is set for those two platforms that currently use polling mode and use it to skip interrupt handler setup. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> --- drivers/i2c/busses/i2c-designware-core.h | 1 + drivers/i2c/busses/i2c-designware-master.c | 42 ++++----------------- drivers/i2c/busses/i2c-designware-pcidrv.c | 2 +- drivers/i2c/busses/i2c-designware-platdrv.c | 2 +- 4 files changed, 11 insertions(+), 36 deletions(-)