Message ID | 20240130121902.462619-1-naresh.solanki@9elements.com |
---|---|
State | Accepted |
Delegated to: | Andi Shyti |
Headers | show |
Series | [RESEND,v5,1/2] dt-bindings: i2c: pca954x: Add custom properties for MAX7357 | expand |
Hi Naresh, On Tue, 30 Jan 2024 17:49:00 +0530, Naresh Solanki wrote: > Maxim Max7357 has a configuration register to enable additional > features. These features aren't enabled by default & its up to > board designer to enable the same as it may have unexpected side effects. > > These should be validated for proper functioning & detection of devices > in secondary bus as sometimes it can cause secondary bus being disabled. > > [...] Applied to i2c/i2c-host on git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux.git Thank you, Andi Patches applied =============== [1/2] dt-bindings: i2c: pca954x: Add custom properties for MAX7357 commit: 8e7d967f04df0fa2c2db00f47ac4cd5ea16ade91 [2/2] i2c: muxes: pca954x: Enable features on MAX7357 commit: 6b572ea231236bb3be4b819d92119470ac121a9e
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml index 2d7bb998b0e9..9aa0585200c9 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml @@ -71,6 +71,23 @@ properties: description: A voltage regulator supplying power to the chip. On PCA9846 the regulator supplies power to VDD2 (core logic) and optionally to VDD1. + maxim,isolate-stuck-channel: + type: boolean + description: Allows to use non faulty channels while a stuck channel is + isolated from the upstream bus. If not set all channels are isolated from + the upstream bus until the fault is cleared. + + maxim,send-flush-out-sequence: + type: boolean + description: Send a flush-out sequence to stuck auxiliary buses + automatically after a stuck channel is being detected. + + maxim,preconnection-wiggle-test-enable: + type: boolean + description: Send a STOP condition to the auxiliary buses when the switch + register activates a channel to detect a stuck high fault. On fault the + channel is isolated from the upstream bus. + required: - compatible - reg @@ -95,6 +112,19 @@ allOf: "#interrupt-cells": false interrupt-controller: false + - if: + not: + properties: + compatible: + contains: + enum: + - maxim,max7357 + then: + properties: + maxim,isolate-stuck-channel: false + maxim,send-flush-out-sequence: false + maxim,preconnection-wiggle-test-enable: false + unevaluatedProperties: false examples: