diff mbox series

[v3,10/12] arm64: dts: exynos: gs101: update USI UART to use peric0 clocks

Message ID 20240109125814.3691033-11-tudor.ambarus@linaro.org
State Superseded
Headers show
Series GS101 Oriole: CMU_PERIC0 support and USI updates | expand

Commit Message

Tudor Ambarus Jan. 9, 2024, 12:58 p.m. UTC
Get rid of the dummy clock and start using the cmu_peric0 clocks
for the usi_uart and serial_0 nodes.

Tested the serial at 115200, 1000000 and 3000000 baudrates,
everthing went fine.

Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
---
v3: no change
v2: identify and use gate clocks instead of divider clocks

 arch/arm64/boot/dts/exynos/google/gs101.dtsi | 14 ++++----------
 1 file changed, 4 insertions(+), 10 deletions(-)

Comments

Sam Protsenko Jan. 16, 2024, 5:58 p.m. UTC | #1
On Tue, Jan 9, 2024 at 7:01 AM Tudor Ambarus <tudor.ambarus@linaro.org> wrote:
>
> Get rid of the dummy clock and start using the cmu_peric0 clocks
> for the usi_uart and serial_0 nodes.
>
> Tested the serial at 115200, 1000000 and 3000000 baudrates,
> everthing went fine.
>
> Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
> ---
> v3: no change
> v2: identify and use gate clocks instead of divider clocks
>
>  arch/arm64/boot/dts/exynos/google/gs101.dtsi | 14 ++++----------
>  1 file changed, 4 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
> index 2d1344a202a9..6aa25cc4676e 100644
> --- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi
> +++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
> @@ -180,14 +180,6 @@ HERA_CPU_SLEEP: cpu-hera-sleep {
>                 };
>         };
>
> -       /* TODO replace with CCF clock */
> -       dummy_clk: clock-3 {
> -               compatible = "fixed-clock";
> -               #clock-cells = <0>;
> -               clock-frequency = <12345>;
> -               clock-output-names = "pclk";
> -       };
> -
>         /* ect node is required to be present by bootloader */
>         ect {
>         };
> @@ -367,7 +359,8 @@ usi_uart: usi@10a000c0 {
>                         ranges;
>                         #address-cells = <1>;
>                         #size-cells = <1>;
> -                       clocks = <&dummy_clk>, <&dummy_clk>;
> +                       clocks = <&cmu_peric0 CLK_GOUT_PERIC0_CLK_PERIC0_USI0_UART_CLK>,
> +                                <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_0>;

That looks much better.

Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>

>                         clock-names = "pclk", "ipclk";
>                         samsung,sysreg = <&sysreg_peric0 0x1020>;
>                         samsung,mode = <USI_V2_UART>;
> @@ -378,7 +371,8 @@ serial_0: serial@10a00000 {
>                                 reg = <0x10a00000 0xc0>;
>                                 interrupts = <GIC_SPI 634
>                                               IRQ_TYPE_LEVEL_HIGH 0>;
> -                               clocks = <&dummy_clk 0>, <&dummy_clk 0>;
> +                               clocks = <&cmu_peric0 CLK_GOUT_PERIC0_CLK_PERIC0_USI0_UART_CLK>,
> +                                        <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_0>;
>                                 clock-names = "uart", "clk_uart_baud0";
>                                 samsung,uart-fifosize = <256>;
>                                 status = "disabled";
> --
> 2.43.0.472.g3155946c3a-goog
>
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
index 2d1344a202a9..6aa25cc4676e 100644
--- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi
+++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
@@ -180,14 +180,6 @@  HERA_CPU_SLEEP: cpu-hera-sleep {
 		};
 	};
 
-	/* TODO replace with CCF clock */
-	dummy_clk: clock-3 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <12345>;
-		clock-output-names = "pclk";
-	};
-
 	/* ect node is required to be present by bootloader */
 	ect {
 	};
@@ -367,7 +359,8 @@  usi_uart: usi@10a000c0 {
 			ranges;
 			#address-cells = <1>;
 			#size-cells = <1>;
-			clocks = <&dummy_clk>, <&dummy_clk>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_CLK_PERIC0_USI0_UART_CLK>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_0>;
 			clock-names = "pclk", "ipclk";
 			samsung,sysreg = <&sysreg_peric0 0x1020>;
 			samsung,mode = <USI_V2_UART>;
@@ -378,7 +371,8 @@  serial_0: serial@10a00000 {
 				reg = <0x10a00000 0xc0>;
 				interrupts = <GIC_SPI 634
 					      IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&dummy_clk 0>, <&dummy_clk 0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_CLK_PERIC0_USI0_UART_CLK>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_0>;
 				clock-names = "uart", "clk_uart_baud0";
 				samsung,uart-fifosize = <256>;
 				status = "disabled";