@@ -130,6 +130,25 @@ static void octeon_i2c_hlc_disable(struct octeon_i2c *i2c)
octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB);
}
+static void octeon_i2c_block_enable(struct octeon_i2c *i2c)
+{
+ if (i2c->block_enabled || !TWSI_BLOCK_CTL(i2c))
+ return;
+
+ i2c->block_enabled = true;
+ octeon_i2c_writeq_flush(TWSI_MODE_STRETCH
+ | TWSI_MODE_BLOCK_MODE, i2c->twsi_base + TWSI_MODE(i2c));
+}
+
+static void octeon_i2c_block_disable(struct octeon_i2c *i2c)
+{
+ if (!i2c->block_enabled || !TWSI_BLOCK_CTL(i2c))
+ return;
+
+ i2c->block_enabled = false;
+ octeon_i2c_writeq_flush(TWSI_MODE_STRETCH, i2c->twsi_base + TWSI_MODE(i2c));
+}
+
/**
* octeon_i2c_hlc_wait - wait for an HLC operation to complete
* @i2c: The struct octeon_i2c
@@ -268,6 +287,7 @@ static int octeon_i2c_start(struct octeon_i2c *i2c)
u8 stat;
octeon_i2c_hlc_disable(i2c);
+ octeon_i2c_block_disable(i2c);
octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB | TWSI_CTL_STA);
ret = octeon_i2c_wait(i2c);
@@ -485,40 +505,53 @@ static int octeon_i2c_hlc_write(struct octeon_i2c *i2c, struct i2c_msg *msgs)
return ret;
}
-/* high-level-controller composite write+read, msg0=addr, msg1=data */
-static int octeon_i2c_hlc_comp_read(struct octeon_i2c *i2c, struct i2c_msg *msgs)
+/* Process hlc transaction */
+static int octeon_i2c_hlc_cmd_send(struct octeon_i2c *i2c, u64 cmd)
{
- int i, j, ret = 0;
- u64 cmd;
-
- octeon_i2c_hlc_enable(i2c);
+ octeon_i2c_hlc_int_clear(i2c);
+ octeon_i2c_writeq_flush(cmd, i2c->twsi_base + SW_TWSI(i2c));
- cmd = SW_TWSI_V | SW_TWSI_R | SW_TWSI_SOVR;
- /* SIZE */
- cmd |= (u64)(msgs[1].len - 1) << SW_TWSI_SIZE_SHIFT;
- /* A */
- cmd |= (u64)(msgs[0].addr & 0x7full) << SW_TWSI_ADDR_SHIFT;
+ return octeon_i2c_hlc_wait(i2c);
+}
- if (msgs[0].flags & I2C_M_TEN)
+/* Construct and send i2c transaction core cmd */
+static int octeon_i2c_hlc_cmd(struct octeon_i2c *i2c, struct i2c_msg msg, u64 cmd)
+{
+ if (msg.flags & I2C_M_TEN)
cmd |= SW_TWSI_OP_10_IA;
else
cmd |= SW_TWSI_OP_7_IA;
- if (msgs[0].len == 2) {
+ if (msg.len == 2) {
u64 ext = 0;
cmd |= SW_TWSI_EIA;
- ext = (u64)msgs[0].buf[0] << SW_TWSI_IA_SHIFT;
- cmd |= (u64)msgs[0].buf[1] << SW_TWSI_IA_SHIFT;
+ ext = (u64)msg.buf[0] << SW_TWSI_IA_SHIFT;
+ cmd |= (u64)msg.buf[1] << SW_TWSI_IA_SHIFT;
octeon_i2c_writeq_flush(ext, i2c->twsi_base + SW_TWSI_EXT(i2c));
} else {
- cmd |= (u64)msgs[0].buf[0] << SW_TWSI_IA_SHIFT;
+ cmd |= (u64)msg.buf[0] << SW_TWSI_IA_SHIFT;
}
- octeon_i2c_hlc_int_clear(i2c);
- octeon_i2c_writeq_flush(cmd, i2c->twsi_base + SW_TWSI(i2c));
+ return octeon_i2c_hlc_cmd_send(i2c, cmd);
+}
- ret = octeon_i2c_hlc_wait(i2c);
+/* high-level-controller composite write+read, msg0=addr, msg1=data */
+static int octeon_i2c_hlc_comp_read(struct octeon_i2c *i2c, struct i2c_msg *msgs)
+{
+ int i, j, ret = 0;
+ u64 cmd;
+
+ octeon_i2c_hlc_enable(i2c);
+
+ cmd = SW_TWSI_V | SW_TWSI_R | SW_TWSI_SOVR;
+ /* SIZE */
+ cmd |= (u64)(msgs[1].len - 1) << SW_TWSI_SIZE_SHIFT;
+ /* A */
+ cmd |= (u64)(msgs[0].addr & 0x7full) << SW_TWSI_ADDR_SHIFT;
+
+ /* Send core command */
+ ret = octeon_i2c_hlc_cmd(i2c, msgs[0], cmd);
if (ret)
goto err;
@@ -579,10 +612,7 @@ static int octeon_i2c_hlc_comp_write(struct octeon_i2c *i2c, struct i2c_msg *msg
if (set_ext)
octeon_i2c_writeq_flush(ext, i2c->twsi_base + SW_TWSI_EXT(i2c));
- octeon_i2c_hlc_int_clear(i2c);
- octeon_i2c_writeq_flush(cmd, i2c->twsi_base + SW_TWSI(i2c));
-
- ret = octeon_i2c_hlc_wait(i2c);
+ ret = octeon_i2c_hlc_cmd_send(i2c, cmd);
if (ret)
goto err;
@@ -594,6 +624,106 @@ static int octeon_i2c_hlc_comp_write(struct octeon_i2c *i2c, struct i2c_msg *msg
return ret;
}
+/**
+ * high-level-controller composite block write+read, msg0=addr, msg1=data
+ * Used in the case where the i2c xfer is for greater than 8 bytes of read data.
+ */
+static int octeon_i2c_hlc_block_comp_read(struct octeon_i2c *i2c, struct i2c_msg *msgs)
+{
+ int len, ret = 0;
+ u64 cmd = 0;
+
+ octeon_i2c_hlc_enable(i2c);
+ octeon_i2c_block_enable(i2c);
+
+ /* Write (size - 1) into block control register */
+ len = msgs[1].len - 1;
+ octeon_i2c_writeq_flush((u64)(len), i2c->twsi_base + TWSI_BLOCK_CTL(i2c));
+
+ /* Prepare core command */
+ cmd = SW_TWSI_V | SW_TWSI_R | SW_TWSI_SOVR;
+ cmd |= (u64)(msgs[0].addr & 0x7full) << SW_TWSI_ADDR_SHIFT;
+
+ /* Send core command */
+ ret = octeon_i2c_hlc_cmd(i2c, msgs[0], cmd);
+ if (ret)
+ return ret;
+
+ cmd = __raw_readq(i2c->twsi_base + SW_TWSI(i2c));
+ if ((cmd & SW_TWSI_R) == 0)
+ return octeon_i2c_check_status(i2c, false);
+
+ /* read data in FIFO */
+ octeon_i2c_writeq_flush(TWSI_BLOCK_STS_RESET_PTR, i2c->twsi_base + TWSI_BLOCK_STS(i2c));
+ for (int i = 0; i < len; i += 8) {
+ u64 rd = __raw_readq(i2c->twsi_base + TWSI_BLOCK_FIFO(i2c));
+ for (int j = 7; j >= 0; j--)
+ msgs[1].buf[i + (7 - j)] = (rd >> (8 * j)) & 0xff;
+ }
+
+ octeon_i2c_block_disable(i2c);
+ return ret;
+}
+
+/**
+ * high-level-controller composite block write+write, m[0]len<=2, m[1]len<=1024
+ * Used in the case where the i2c xfer is for greater than 8 bytes of write data.
+ */
+static int octeon_i2c_hlc_block_comp_write(struct octeon_i2c *i2c, struct i2c_msg *msgs)
+{
+ bool set_ext = false;
+ int len, ret = 0;
+ u64 cmd, ext = 0;
+
+ octeon_i2c_hlc_enable(i2c);
+ octeon_i2c_block_enable(i2c);
+
+ /* Write (size - 1) into block control register */
+ len = msgs[1].len - 1;
+ octeon_i2c_writeq_flush((u64)(len), i2c->twsi_base + TWSI_BLOCK_CTL(i2c));
+
+ /* Prepare core command */
+ cmd = SW_TWSI_V | SW_TWSI_SOVR;
+ cmd |= (u64)(msgs[0].addr & 0x7full) << SW_TWSI_ADDR_SHIFT;
+
+ if (msgs[0].flags & I2C_M_TEN)
+ cmd |= SW_TWSI_OP_10_IA;
+ else
+ cmd |= SW_TWSI_OP_7_IA;
+
+ if (msgs[0].len == 2) {
+ cmd |= SW_TWSI_EIA;
+ ext |= (u64)msgs[0].buf[0] << SW_TWSI_IA_SHIFT;
+ set_ext = true;
+ cmd |= (u64)msgs[0].buf[1] << SW_TWSI_IA_SHIFT;
+ } else {
+ cmd |= (u64)msgs[0].buf[0] << SW_TWSI_IA_SHIFT;
+ }
+
+ /* Write msg into FIFO buffer */
+ octeon_i2c_writeq_flush(TWSI_BLOCK_STS_RESET_PTR, i2c->twsi_base + TWSI_BLOCK_STS(i2c));
+ for (int i = 0; i < len; i += 8) {
+ u64 buf = 0;
+ for (int j = 7; j >= 0; j--)
+ buf |= (msgs[1].buf[i + (7 - j)] << (8 * j));
+ octeon_i2c_writeq_flush(buf, i2c->twsi_base + TWSI_BLOCK_FIFO(i2c));
+ }
+ if (set_ext)
+ octeon_i2c_writeq_flush(ext, i2c->twsi_base + SW_TWSI_EXT(i2c));
+
+ /* Send command to core (send data in FIFO) */
+ ret = octeon_i2c_hlc_cmd_send(i2c, cmd);
+ if (ret)
+ return ret;
+
+ cmd = __raw_readq(i2c->twsi_base + SW_TWSI(i2c));
+ if ((cmd & SW_TWSI_R) == 0)
+ return octeon_i2c_check_status(i2c, false);
+
+ octeon_i2c_block_disable(i2c);
+ return ret;
+}
+
/**
* octeon_i2c_xfer - The driver's master_xfer function
* @adap: Pointer to the i2c_adapter structure
@@ -619,13 +749,21 @@ int octeon_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
if ((msgs[0].flags & I2C_M_RD) == 0 &&
(msgs[1].flags & I2C_M_RECV_LEN) == 0 &&
msgs[0].len > 0 && msgs[0].len <= 2 &&
- msgs[1].len > 0 && msgs[1].len <= 8 &&
+ msgs[1].len > 0 &&
msgs[0].addr == msgs[1].addr) {
- if (msgs[1].flags & I2C_M_RD)
- ret = octeon_i2c_hlc_comp_read(i2c, msgs);
- else
- ret = octeon_i2c_hlc_comp_write(i2c, msgs);
- goto out;
+ if (msgs[1].len <= 8) {
+ if (msgs[1].flags & I2C_M_RD)
+ ret = octeon_i2c_hlc_comp_read(i2c, msgs);
+ else
+ ret = octeon_i2c_hlc_comp_write(i2c, msgs);
+ goto out;
+ } else if (msgs[1].len <= 1024 && TWSI_BLOCK_CTL(i2c)) {
+ if (msgs[1].flags & I2C_M_RD)
+ ret = octeon_i2c_hlc_block_comp_read(i2c, msgs);
+ else
+ ret = octeon_i2c_hlc_block_comp_write(i2c, msgs);
+ goto out;
+ }
}
}
@@ -85,6 +85,11 @@
#define TWSI_INT_SDA BIT_ULL(10)
#define TWSI_INT_SCL BIT_ULL(11)
+#define TWSI_MODE_STRETCH BIT_ULL(1)
+#define TWSI_MODE_BLOCK_MODE BIT_ULL(2)
+
+#define TWSI_BLOCK_STS_RESET_PTR BIT_ULL(0)
+#define TWSI_BLOCK_STS_BUSY BIT_ULL(1)
#define I2C_OCTEON_EVENT_WAIT 80 /* microseconds */
/* Register offsets */
@@ -92,11 +97,19 @@ struct octeon_i2c_reg_offset {
unsigned int sw_twsi;
unsigned int twsi_int;
unsigned int sw_twsi_ext;
+ unsigned int twsi_mode;
+ unsigned int twsi_block_ctl;
+ unsigned int twsi_block_sts;
+ unsigned int twsi_block_fifo;
};
#define SW_TWSI(x) (x->roff.sw_twsi)
#define TWSI_INT(x) (x->roff.twsi_int)
#define SW_TWSI_EXT(x) (x->roff.sw_twsi_ext)
+#define TWSI_MODE(x) (x->roff.twsi_mode)
+#define TWSI_BLOCK_CTL(x) (x->roff.twsi_block_ctl)
+#define TWSI_BLOCK_STS(x) (x->roff.twsi_block_sts)
+#define TWSI_BLOCK_FIFO(x) (x->roff.twsi_block_fifo)
struct octeon_i2c {
wait_queue_head_t queue;
@@ -110,6 +123,7 @@ struct octeon_i2c {
void __iomem *twsi_base;
struct device *dev;
bool hlc_enabled;
+ bool block_enabled;
bool broken_irq_mode;
bool broken_irq_check;
void (*int_enable)(struct octeon_i2c *);
@@ -165,6 +165,10 @@ static int thunder_i2c_probe_pci(struct pci_dev *pdev,
i2c->roff.sw_twsi = 0x1000;
i2c->roff.twsi_int = 0x1010;
i2c->roff.sw_twsi_ext = 0x1018;
+ i2c->roff.twsi_mode = 0x1038;
+ i2c->roff.twsi_block_ctl = 0x1048;
+ i2c->roff.twsi_block_sts = 0x1050;
+ i2c->roff.twsi_block_fifo = 0x1058;
i2c->dev = dev;
pci_set_drvdata(pdev, i2c);
Add support for block mode read/write operations on Thunderx chips. When attempting r/w operations of greater then 8 bytes block mode is used, instead of performing a series of 8 byte reads. Signed-off-by: Aryan Srivastava <aryan.srivastava@alliedtelesis.co.nz> --- Changes in v2: - comment style and formatting. Changes in v3: - comment style and formatting. Changes in v4: - Refactoring common code. - Additional comments. --- drivers/i2c/busses/i2c-octeon-core.c | 196 +++++++++++++++++++---- drivers/i2c/busses/i2c-octeon-core.h | 14 ++ drivers/i2c/busses/i2c-thunderx-pcidrv.c | 4 + 3 files changed, 185 insertions(+), 29 deletions(-)