diff mbox series

[21/21] i2c: xiic: make use of i2c_8bit_addr_from_msg

Message ID 20180514145330.4857-22-peda@axentia.se
State Superseded
Headers show
Series i2c: make use of i2c_8bit_addr_from_msg | expand

Commit Message

Peter Rosin May 14, 2018, 2:53 p.m. UTC
Because it looks neater.

Signed-off-by: Peter Rosin <peda@axentia.se>
---
 drivers/i2c/busses/i2c-xiic.c | 11 ++---------
 1 file changed, 2 insertions(+), 9 deletions(-)
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index c80527816ad0..1818c3b5c8d7 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -143,12 +143,6 @@  struct xiic_i2c {
 
 #define XIIC_TX_RX_INTERRUPTS (XIIC_INTR_RX_FULL_MASK | XIIC_TX_INTERRUPTS)
 
-/* The following constants are used with the following macros to specify the
- * operation, a read or write operation.
- */
-#define XIIC_READ_OPERATION  1
-#define XIIC_WRITE_OPERATION 0
-
 /*
  * Tx Fifo upper bit masks.
  */
@@ -556,8 +550,7 @@  static void xiic_start_recv(struct xiic_i2c *i2c)
 	if (!(msg->flags & I2C_M_NOSTART))
 		/* write the address */
 		xiic_setreg16(i2c, XIIC_DTR_REG_OFFSET,
-			(msg->addr << 1) | XIIC_READ_OPERATION |
-			XIIC_TX_DYN_START_MASK);
+			i2c_8bit_addr_from_msg(msg) | XIIC_TX_DYN_START_MASK);
 
 	xiic_irq_clr_en(i2c, XIIC_INTR_BNB_MASK);
 
@@ -585,7 +578,7 @@  static void xiic_start_send(struct xiic_i2c *i2c)
 
 	if (!(msg->flags & I2C_M_NOSTART)) {
 		/* write the address */
-		u16 data = ((msg->addr << 1) & 0xfe) | XIIC_WRITE_OPERATION |
+		u16 data = i2c_8bit_addr_from_msg(msg) |
 			XIIC_TX_DYN_START_MASK;
 		if ((i2c->nmsgs == 1) && msg->len == 0)
 			/* no data and last message -> add STOP */