diff mbox

[RFC,V2,03/12] i2c: at91: make use of the new infrastructure for quirks

Message ID 1424880126-15047-4-git-send-email-wsa@the-dreams.de
State Accepted
Headers show

Commit Message

Wolfram Sang Feb. 25, 2015, 4:01 p.m. UTC
From: Wolfram Sang <wsa+renesas@sang-engineering.com>

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
 drivers/i2c/busses/i2c-at91.c | 32 +++++++++++---------------------
 1 file changed, 11 insertions(+), 21 deletions(-)

Comments

Wolfram Sang March 8, 2015, 8:28 a.m. UTC | #1
On Wed, Feb 25, 2015 at 05:01:54PM +0100, Wolfram Sang wrote:
> From: Wolfram Sang <wsa+renesas@sang-engineering.com>
> 
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

Hi Ludovic,

if you have a few minutes, could you please test this series? I'd like to
include it in 4.1. and because at91 is using the quirk infrastructure in
a more complex way, it is a really good test candidate.

Thanks,

   Wolfram

> ---
>  drivers/i2c/busses/i2c-at91.c | 32 +++++++++++---------------------
>  1 file changed, 11 insertions(+), 21 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
> index 636fd2efad8850..b3a70e8fc653c5 100644
> --- a/drivers/i2c/busses/i2c-at91.c
> +++ b/drivers/i2c/busses/i2c-at91.c
> @@ -487,30 +487,10 @@ static int at91_twi_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, int num)
>  	if (ret < 0)
>  		goto out;
>  
> -	/*
> -	 * The hardware can handle at most two messages concatenated by a
> -	 * repeated start via it's internal address feature.
> -	 */
> -	if (num > 2) {
> -		dev_err(dev->dev,
> -			"cannot handle more than two concatenated messages.\n");
> -		ret = 0;
> -		goto out;
> -	} else if (num == 2) {
> +	if (num == 2) {
>  		int internal_address = 0;
>  		int i;
>  
> -		if (msg->flags & I2C_M_RD) {
> -			dev_err(dev->dev, "first transfer must be write.\n");
> -			ret = -EINVAL;
> -			goto out;
> -		}
> -		if (msg->len > 3) {
> -			dev_err(dev->dev, "first message size must be <= 3.\n");
> -			ret = -EINVAL;
> -			goto out;
> -		}
> -
>  		/* 1st msg is put into the internal address, start with 2nd */
>  		m_start = &msg[1];
>  		for (i = 0; i < msg->len; ++i) {
> @@ -540,6 +520,15 @@ out:
>  	return ret;
>  }
>  
> +/*
> + * The hardware can handle at most two messages concatenated by a
> + * repeated start via it's internal address feature.
> + */
> +static struct i2c_adapter_quirks at91_twi_quirks = {
> +	.flags = I2C_AQ_COMB | I2C_AQ_COMB_WRITE_FIRST | I2C_AQ_COMB_SAME_ADDR,
> +	.max_comb_1st_msg_len = 3,
> +};
> +
>  static u32 at91_twi_func(struct i2c_adapter *adapter)
>  {
>  	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL
> @@ -777,6 +766,7 @@ static int at91_twi_probe(struct platform_device *pdev)
>  	dev->adapter.owner = THIS_MODULE;
>  	dev->adapter.class = I2C_CLASS_DEPRECATED;
>  	dev->adapter.algo = &at91_twi_algorithm;
> +	dev->adapter.quirks = &at91_twi_quirks;
>  	dev->adapter.dev.parent = dev->dev;
>  	dev->adapter.nr = pdev->id;
>  	dev->adapter.timeout = AT91_I2C_TIMEOUT;
> -- 
> 2.1.4
>
ludovic.desroches@atmel.com March 9, 2015, 4:11 p.m. UTC | #2
Hi Wolfram,

On Sun, Mar 08, 2015 at 09:28:45AM +0100, Wolfram Sang wrote:
> On Wed, Feb 25, 2015 at 05:01:54PM +0100, Wolfram Sang wrote:
> > From: Wolfram Sang <wsa+renesas@sang-engineering.com>
> > 
> > Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> 
> Hi Ludovic,
> 
> if you have a few minutes, could you please test this series? I'd like to
> include it in 4.1. and because at91 is using the quirk infrastructure in
> a more complex way, it is a really good test candidate.

It was in the pipe. I have reviewed it, this second version seems to be
good. I am just waiting a bit more to give you my ack since I have some
issues to read an i2c eeprom (it works with a temperature sensor).
I am investigating if it doesn't come from a previous regression.

> 
> Thanks,
> 
>    Wolfram
> 

Regards

Ludovic
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
ludovic.desroches@atmel.com March 10, 2015, 1:55 p.m. UTC | #3
Hi Wolfram,

You can add my 

Acked-by and Tested-By: Ludovic Desroches <ludovic.desroches@atmel.com>

Tested on sama5d3, some problems with at24 eeprom on sama5d4 but it
doesn't come from the i2c quirks patch series.

Regards

Ludovic

On Sun, Mar 08, 2015 at 09:28:45AM +0100, Wolfram Sang wrote:
> On Wed, Feb 25, 2015 at 05:01:54PM +0100, Wolfram Sang wrote:
> > From: Wolfram Sang <wsa+renesas@sang-engineering.com>
> > 
> > Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> 
> Hi Ludovic,
> 
> if you have a few minutes, could you please test this series? I'd like to
> include it in 4.1. and because at91 is using the quirk infrastructure in
> a more complex way, it is a really good test candidate.
> 
> Thanks,
> 
>    Wolfram
> 
> > ---
> >  drivers/i2c/busses/i2c-at91.c | 32 +++++++++++---------------------
> >  1 file changed, 11 insertions(+), 21 deletions(-)
> > 
> > diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
> > index 636fd2efad8850..b3a70e8fc653c5 100644
> > --- a/drivers/i2c/busses/i2c-at91.c
> > +++ b/drivers/i2c/busses/i2c-at91.c
> > @@ -487,30 +487,10 @@ static int at91_twi_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, int num)
> >  	if (ret < 0)
> >  		goto out;
> >  
> > -	/*
> > -	 * The hardware can handle at most two messages concatenated by a
> > -	 * repeated start via it's internal address feature.
> > -	 */
> > -	if (num > 2) {
> > -		dev_err(dev->dev,
> > -			"cannot handle more than two concatenated messages.\n");
> > -		ret = 0;
> > -		goto out;
> > -	} else if (num == 2) {
> > +	if (num == 2) {
> >  		int internal_address = 0;
> >  		int i;
> >  
> > -		if (msg->flags & I2C_M_RD) {
> > -			dev_err(dev->dev, "first transfer must be write.\n");
> > -			ret = -EINVAL;
> > -			goto out;
> > -		}
> > -		if (msg->len > 3) {
> > -			dev_err(dev->dev, "first message size must be <= 3.\n");
> > -			ret = -EINVAL;
> > -			goto out;
> > -		}
> > -
> >  		/* 1st msg is put into the internal address, start with 2nd */
> >  		m_start = &msg[1];
> >  		for (i = 0; i < msg->len; ++i) {
> > @@ -540,6 +520,15 @@ out:
> >  	return ret;
> >  }
> >  
> > +/*
> > + * The hardware can handle at most two messages concatenated by a
> > + * repeated start via it's internal address feature.
> > + */
> > +static struct i2c_adapter_quirks at91_twi_quirks = {
> > +	.flags = I2C_AQ_COMB | I2C_AQ_COMB_WRITE_FIRST | I2C_AQ_COMB_SAME_ADDR,
> > +	.max_comb_1st_msg_len = 3,
> > +};
> > +
> >  static u32 at91_twi_func(struct i2c_adapter *adapter)
> >  {
> >  	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL
> > @@ -777,6 +766,7 @@ static int at91_twi_probe(struct platform_device *pdev)
> >  	dev->adapter.owner = THIS_MODULE;
> >  	dev->adapter.class = I2C_CLASS_DEPRECATED;
> >  	dev->adapter.algo = &at91_twi_algorithm;
> > +	dev->adapter.quirks = &at91_twi_quirks;
> >  	dev->adapter.dev.parent = dev->dev;
> >  	dev->adapter.nr = pdev->id;
> >  	dev->adapter.timeout = AT91_I2C_TIMEOUT;
> > -- 
> > 2.1.4
> > 


--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Wolfram Sang March 12, 2015, 2:50 p.m. UTC | #4
> You can add my 
> 
> Acked-by and Tested-By: Ludovic Desroches <ludovic.desroches@atmel.com>
> 
> Tested on sama5d3, some problems with at24 eeprom on sama5d4 but it
> doesn't come from the i2c quirks patch series.

Thanks for testing! Are the eeprom problems something which needs fixing
upstream?
diff mbox

Patch

diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index 636fd2efad8850..b3a70e8fc653c5 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -487,30 +487,10 @@  static int at91_twi_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, int num)
 	if (ret < 0)
 		goto out;
 
-	/*
-	 * The hardware can handle at most two messages concatenated by a
-	 * repeated start via it's internal address feature.
-	 */
-	if (num > 2) {
-		dev_err(dev->dev,
-			"cannot handle more than two concatenated messages.\n");
-		ret = 0;
-		goto out;
-	} else if (num == 2) {
+	if (num == 2) {
 		int internal_address = 0;
 		int i;
 
-		if (msg->flags & I2C_M_RD) {
-			dev_err(dev->dev, "first transfer must be write.\n");
-			ret = -EINVAL;
-			goto out;
-		}
-		if (msg->len > 3) {
-			dev_err(dev->dev, "first message size must be <= 3.\n");
-			ret = -EINVAL;
-			goto out;
-		}
-
 		/* 1st msg is put into the internal address, start with 2nd */
 		m_start = &msg[1];
 		for (i = 0; i < msg->len; ++i) {
@@ -540,6 +520,15 @@  out:
 	return ret;
 }
 
+/*
+ * The hardware can handle at most two messages concatenated by a
+ * repeated start via it's internal address feature.
+ */
+static struct i2c_adapter_quirks at91_twi_quirks = {
+	.flags = I2C_AQ_COMB | I2C_AQ_COMB_WRITE_FIRST | I2C_AQ_COMB_SAME_ADDR,
+	.max_comb_1st_msg_len = 3,
+};
+
 static u32 at91_twi_func(struct i2c_adapter *adapter)
 {
 	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL
@@ -777,6 +766,7 @@  static int at91_twi_probe(struct platform_device *pdev)
 	dev->adapter.owner = THIS_MODULE;
 	dev->adapter.class = I2C_CLASS_DEPRECATED;
 	dev->adapter.algo = &at91_twi_algorithm;
+	dev->adapter.quirks = &at91_twi_quirks;
 	dev->adapter.dev.parent = dev->dev;
 	dev->adapter.nr = pdev->id;
 	dev->adapter.timeout = AT91_I2C_TIMEOUT;